Abstract:Low-density polyethylene (LDPE), as an excellent dielectric insulating material, is widely used in electrical equipment insulation, whereas its low thermal conductivity limits its further development and application. Hexagonal boron nitride (h-BN) filler was introduced into LDPE to tailor the properties of LDPE to make it more suitable for high-voltage direct current (HVDC) cable insulation application. We employed melt blending to prepare h-BN/LDPE thermally conductive composite insulation materials with different contents. We focused on investigating the micromorphology and structure, thermal properties, and electrical properties of h-BN/LDPE composites, and explained the space charge characteristics. The scanning electron microscope (SEM) results indicate that the h-BN filler has good dispersibility in the LDPE at a low loading (less than 3 phr (3 g of micron h-BN particles filled in 100g of LDPE)), as well as no heterogeneous phase formation. The results of thermal conductivity analysis show that the introduction of h-BN filler can significantly improve the thermal conductivity of composites. The thermal conductivity of the composite samples with 10 phr h-BN particles is as high as 0.51 W/(m·K), which is 57% higher than that of pure LDPE. The electrical performance illustrates that h-BN filler doping can significantly inhibit space charge injection and reduce space charge accumulation in LDPE. The interface effect between h-BN and the substrate reduces the carrier mobility, thereby suppressing the injection of charges of the same polarity and increasing the direct-current (DC) breakdown strength. h-BN/LDPE composite doped with 3 phr h-BN particles has excellent space charge suppression effect and high DC breakdown strength, which is 14.3% higher than that of pure LDPE.

Charge transport in low density polyethylene based micro/nano-composite with improved thermal conductivity

Effect of Nanoparticle Type on Charge Transport Characteristics of LDPE/Micro-BN Composite with High Thermal Conductivity

Surface Potential Decay on LDPE and Its Nanocomposites

Charge Dynamics and Thermal Properties of Epoxy Based Micro and Nano Hybrid Composites at High Temperatures

Effect of hybrid nanofillers on thermal conductivity of composite phase change materials

Thermal conductivity and dielectric properties of immiscible LDPE/epoxy blend filled with hybrid filler consisting of HGM and nitride particle

Conductance Current and Space Charge Characteristics of SiO2/MMT/LDPE Micro-Nano Composites

Conductance Current and Space Charge Characteristics of SiO 2 /MMT/LDPE Micro-Nano Composites.

Enhancement in Electrical and Thermal Properties of LDPE with Al2O3 and h-BN as Nanofiller

Polymer Composite with Enhanced Thermal Conductivity and Insulation Properties through Aligned Al2O3 Fiber

Enhanced Thermal Conductivity and Dielectric Properties of h-BN/LDPE Composites

Enhancing the electrical conductivity of polymer composites

Trap Modulated Charge Carrier Transport in Polyethylene/Graphene Nanocomposites

Dielectric properties of the polymer based composites filled by the different conductivities fillers

Influence of Surface Modification on Electrical Properties of Polyethylene Sio2 Nanocomposites

Nonlinear Conductive Properties and Scaling Behavior of Conductive Particle Filled High-Density Polyethylene Composites

Enhanced Thermal Conductivity of Polypropylene/polyamide 6 Composites Via Optimizing the Selective Distribution of H-Bn and NH2-CNTs Hybrid Fillers Within the Co-Continuous Structure

Enhanced Thermal Conductivity of High-Density Polyethylene Composites with Hybrid Fillers of Flaky and Spherical Boron Nitride Particles

Dependence of Dielectric Behavior on the Physical Property of Fillers in the Polymer-Matrix Composites

Thermal Properties Of Carbon Nanofiber Reinforced High-Density Polyethylene Nanocomposites

Electrical and Heat Conduction Properties of Polymerization-Filled Composites Based on Ultra-High-Molecular-Weight Polyethylene and Nano- and Micron-Sized Aluminum Particles