Abstract:Purpose This study aims to investigate the factors influencing the reduction in strength of sewing threads after stitching (after-stitch strength reduction) in different fabric assemblies, including nonwoven fabrics. This research expands upon previous studies, which primarily focused on woven fabrics. Design/methodology/approach A full-factorial experimental design was employed, considering three factors: fabric assembly type (woven, nonwoven, composite), yarn type (spun polyester, core-spun polyester) and thread count (30 Tex, 60 Tex). Also, the stitching parameters stitch density (3 spc, 5 spc) and needle count (75 Nm, 100 Nm) were considered. The predictive regression model was also developed with a second-degree order. Tensile testing was conducted on unravelled threads before and after stitching to assess strength reduction. Findings Fabric assembly type significantly impacted after-stitch strength reduction, with the composite assembly exhibiting the highest reduction. Yarn type played a crucial role in the composite assembly; core-spun yarn experienced higher strength reduction compared to spun polyester yarn. Thread count consistently affected strength reduction across all fabric assemblies, with finer threads experiencing higher reductions. Stitch density generally had a positive correlation with strength reduction for woven and nonwoven assemblies, but no significant difference was observed in the composite assembly. Needle count did not significantly impact strength reduction for any fabric assembly. Practical implications The findings can guide the selection of appropriate sewing threads, yarn types and sewing parameters for different fabric assemblies, including nonwoven fabrics, to optimize seam performance and garment durability. Originality/value This study contributes to the understanding of how fabric structure, yarn characteristics and sewing parameters interact to influence sewing thread strength reduction in diverse fabric assemblies, including nonwoven fabrics, which were not previously considered in similar studies. This broader investigation provides valuable insights applicable to a wider range of sewing applications.

Impact of Positive Thread Feeding for High-Speed Industrial Lockstitch Sewing Machines: Part II Response with Cotton and Spun Polyester Needle Threads

Effect of Process and Machine Parameters on Changes in Tensile Properties of Threads during High-speed Industrial Sewing

Study on the Effect of Pre-Tension on Performance of Polyester/cotton/silk Sirofil Composite Yarn

A comparative analysis of after-stitch strength reduction in sewing threads across woven, nonwoven and composite fabric assemblies

Revealing Rheological Parameters of Cotton-stitch-modified Cotton Fabrics by Three-Network Modeling (TNM) of Materials

Characterization of tensile properties of chain stitch structure fabric with negative Poisson's ratio yarn

Influence of Stitch Density and Seam Directions on Tensile Properties of Knitted Fabrics

New feeding mechanism to enhance the properties of wrapped elastic composite yarn and denim fabrics thereof

Load extension behavior of spun sewing threads on seam slippage

Investigation of the effects of different needle hole covering techniques on seam characteristics of waterproof breathable fabric

A comparative study of physical properties of nonwoven fabrics produced by uni- and bi-directional needles using response surface methodology

Study on an innovative knitting technology of spacer fabrics and the low-velocity impact properties of its composites

Highly conductive-sensitive, single-walled carbon nanotubes–poly(3,4-ethylenedioxythiophene) polystyrene sulphonate-coated cotton thread for thermally stable fabric and wearable e-textiles

The Effect of Stitch Density and Stitching Patterns on the Puncture Resistance of High Strength Plain Woven Fabric

A novel method of identifying sewing damage in single jersey fabrics

Impact of Weft Yarn Structure and Fiber Type on Weft Yarn Velocity and Twist Loss in Air-Jet Weaving: A Critical Review

Analysing the effect of mechanically recycled cotton fibres from pre-consumer wastes on mechanical and fastness properties of knitted fabrics

Tensile Properties of Reinforced Multi-Axial Warp Knitted Fabrics

Effect of Structural Changes on the Cotton Composite Yarn Properties

Tensile behavior of virgin and recycled polyester nonwoven filter fabrics

Impact of yarn compositions, loop length, and float stitches on the mechanical behavior of knitted fabrics via full factorial design and RSM