Abstract:An improved understanding of the performance of composite beams subjected to combined flexure and torsion is essential for practical design as such loading states are very common in bridges for the main girder and in buildings for edge beams. Multi-span steel–concrete composite beams consisting of two steel joists and one concrete slab are concerned herein, on which an experimental study and finite element (FE) modelling analyses are presented. Eight reduced scale beams under combined flexure and torsion to varying degrees are tested, with both full and partial shear connection being incorporated. Either flexure-dominated or torsion-dominated failure modes are observed in each test depending on the ratio between the bending and torsional moments applied externally. Load-deformation responses, ultimate strengths as well as flexure–torsion interaction of all specimens are also reported and discussed. Based on the experimental outcomes, a three-dimensional FE model is developed and further validated against the test results, and an extensive range of parametric analyses are undertaken by using the FE model. It is indicated that in addition to well-known parameters relating to the concrete slab and stirrups, the torsional strength of multi-span composite beams is also sensitive to the degree of shear connection, spacing of the joists and span-to-depth ratio. Contributions of the steel joist and its constraint on the slab towards the torsional strength are increased. With respect to their flexure–torsion interaction relation, no increase in the torsional strength is observed within the presence of combined flexure, and vice versa. The interaction is insensitive generally to various parameters considered herein and the test results exhibit consistent phenomenon. Design guidance and new equations for predicting the torsional strength and the flexure–torsion interaction relation are proposed based on the test and FE analysis results as well as a comprehensive review of existing approaches in the literature.

Tension stiffening approach for deformation assessment of flexural reinforced concrete members under compressive axial load

Uniaxial Concrete Tension Damage Evolution Using Acoustic Emission Monitoring

Influence of Axial Stress on Shear Response of Reinforced Concrete Elements

Finite Element Modeling of Concrete Beams Prestressed with External Tendons

Effects of Ordinary Tension Reinforcement on the Response of Beams with Unbonded Tendons

Theoretical Study on the Confine-Stiffening Effect and Fractal Cracking of Square Concrete Filled Steel Tubes in Tension Loads

Flexural Response of Axially Restricted RC Beams: Numerical and Theoretical Study

Prediction of Flexural Deformation of Reinforcement Concrete Beams with Polynomial Tension Stiffening Model

Performance assessment of post-tensioned concrete-filled steel tube beams using unbonded tendons with uncertainty quantification

Experimental and Numerical Analysis of Strain Gradient in Tensile Concrete Prisms Reinforced with Multiple Bars

Assessment of Existing Bridge’s Beam Bending Stiffness Using Crack Characteristics

Tension stiffening in reinforced concrete hollow core slabs

Stiffness Degradation Characteristics Destructive Testing and Finite-Element Analysis of Prestressed Concrete T-Beam

Analysis of Equivalent Flexural Stiffness of Steel–Concrete Composite Beams in Frame Structures

Theoretical analysis of flexural performance of plain concrete composite beams strengthened with ultrahigh toughness cementitious composite

Behavior of concrete-filled T-shaped steel tubular beam-columns under biaxial compressive loads

Experimental study and model of steel plate concrete composite members under tension

Experimental and Theoretical Investigations on Crack Spacing and Stiffness of Textile-Reinforced Concrete–strengthened Reinforced Concrete Beams

Structural Behaviour of Concrete-Encased CFST Box Stub Columns under Axial Compression

Strength of Multi-Span Composite Beams Subjected to Combined Flexure and Torsion

Flexural behavior of high-strength, steel-reinforced, and prestressed concrete beams