Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

Compressive mechanical properties of W-particle/Zr-based amorphous alloy composites

Mechanical Properties and Thermal Shock Performance of W-Y2O3composite Prepared by High-Energy-rate Forging

Influence of Zrc Content on the Elevated Temperature Tensile Properties of Zrcp/W Composites

Mechanical Properties of Cu50Zr50 Amorphous/b2-Cuzr Crystalline Composites Studied by Molecular Dynamic Method

Effect of particle size on dynamic mechanical behaviors of W particles/Zr-based bulk metallic glass composites

Effect of fiber volume fraction on the compressive properties of the W fiber/Zr-based metallic glass composites

EFFECT OF W FIBER DIAMETER ON THE COMPRESSIVE MECHANICAL PROPERTIES OF THE Zr-BASED METALLIC GLASS COMPOSITES

Dynamic mechanical properties of W-Zr alloy

Preparation and mechanical properties of tungsten-particle-reinforced Zr-based bulk-metallic-glass composites

Anisotropy and stability of the mechanical properties of the W alloy plate reinforced with Y-Zr-O particles and prepared by a wet chemical method

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Effect of different crystal forms of ZrO 2 on the microstructure and properties of tungsten alloys

Study on the Microstructure and Mechanical Properties of W-wire/TiBe, ZrBe, and ZrTiBe Alloy Composites

Effects of ZrN and W Particle Sizes on the Mechanical and Ablation Properties of ZrN/W Composites

Effect of Tungsten Fiber Diameter on the Dynamic Compression Properties of Tungsten Fiber/zr-Based Bulk Metallic Glasses Matrix Composite

Microstructure and Mechanical Properties of Zr-Based Metallic Glass Composites with Size-Variable Tungsten Reinforcements

Extremely uniform nanosized oxide particles dispersion strengthened tungsten alloy with high tensile and compressive strengths fabricated involving liquid-liquid method

Superior Radiation Resistance of ZrO2-Modified W Composites

Enhanced Mechanical and Electrical Properties of CuCrZr-WC Alloy Prepared by Mechanical Alloying and Spark Plasma Sintering

Synthesis and properties of tungsten balls/Zr-base metallic glass composite

The influence of metallic particle size on the mechanical properties of PTFE-Al-W powder composites