Abstract:In the current work, the yttria stabilized zirconia (YSZ) thermal barrier coatings (TBCs) have been fabricated by atmospheric plasma spraying. The failure mechanism of the TBCs during burner rig test (BRT) has been investigated via finite element modeling (FEM) and in-situ acoustic emission (AE) technique systematically. During the BRT, the oxygen-propane flame was heated onto the surface of the coating samples with the dwell time 3 min, then the surface and the backside of the coating samples were cooled by the compressed air simultaneously for 3 min. This can be viewed as one thermal cycle. Then repeat the same heating and cooling process. The history and distribution of the temperature along the through-thickness direction of the coating samples has been obtained via FEM, and the residual stress at different stages has been also calculated. The FEM results have indicated that large tensile stress and compressive stress existed at the heating stage and cooling stage of each thermal cycle, respectively. The crack propagation tends to occur at the initial period of heating stage in the BRT process. The in-situ acquisition of the AE signals during the BRT has also been adopted. The crack propagation patterns have been obtained based on the analysis of AE signals. The filtering technique has been used to exclude the disturbance of the noise in the process of BRT in order to capture the actual and effective AE signals which represent the crack propagation and the deformation of the coating systems. Based on the characteristic waveform of effective AE signals, the Fast Fourier Transformation (FFT) and wavelet transformation has been adopted to analyze the key distribution range of the amplitude and frequency. The investigation results indicate that the acquired AE signals during BRT mainly include signals which came from the plastic deformation of the substrate and creep of each layers, propagation of the vertical crack and propagation of the interfacial cracks (horizontal crack). The detailed failure mechanisms of the TBCs during BRT have been clarified in the current work.

Measurements of elastic modulus and fracture toughness of an air plasma sprayed thermal barrier coating using micro-cantilever bending

Evaluation of Interfacial Properties of Atmospheric Pressure Plasma-Treated Cnt-Phenolic Composites by Dual Matrix Fragmentation and Acoustic Emission Tests

Determination of Mixed-Mode Interfacial Fracture Toughness for Thermal Barrier Coatings

Determination and Analysis of Crack Growth Resistance in Plasma-Sprayed Thermal Barrier Coatings

Nanomechanical properties of plasma-sprayed nanostructured and conventional 8YSZ thermal barrier coatings

Prediction of critical rupture of plasma-sprayed yttria stabilized zirconia thermal barrier coatings under burner rig test via finite element simulation and in-situ acoustic emission technique

Effect of porous microstructure on the elastic modulus of plasma-sprayed thermal barrier coatings: Experiment and numerical analysis

Thermal Fatigue of Atmospheric Plasma Sprayed Thermal Barrier Coatings

Precise Strain Profile Measurement As a Function of Depth in Thermal Barrier Coatings Using High Energy Synchrotron X-rays

In-Situ Characterization on Fracture Toughness of Thermal Barrier Coatings Under Tension by J-Integral with Digital Image Correlation at High Temperatures

Investigating the Cmas Corrosion Resistance and Thermal Cycling Failure Behavior of Porous Thermal Barrier Coatings with Different Morphologies Prepared by Plasma Spraying

Laser Thermal Gradient Testing and Fracture Mechanics Study of a Thermal Barrier Coating

Thermal Aging Effect on In-Plane and Cross-Plane Thermal Diffusivities of Plasma-Sprayed Thermal Barrier Coating

Physical and mechanical properties of plasma-sprayed thermal barrier coatings at room and high temperatures

Shakedown Analysis and Experimental Study of Thermal Barrier Coatings

Measurement of Young’s Modulus and Poisson’s Ratio of Thermal Barrier Coating Based on Bending of Three-Layered Plate

Growth selection induced residual stresses and fracture behavior of as‐deposited thermal barrier coatings

High Temperature Fracture Toughness and Residual Stress in Thermal Barrier Coatings Evaluated by an In-Situ Indentation Method

Measurement of the Elastic Modulus and Residual Stress of Thermal Barrier Coatings Using a Digital Image Correlation Technique

RESEARCH PROGRESS ON THE EXPERIMENTAL MEASUREMENT METHODS OF MECHANICAL PROPERTIES OF THERMAL BARRIER COATINGS

Simulation of Residual Stresses and Their Effects on Thermal Barrier Coating Systems Using Finite Element Method