Abstract:Shear-dominated hazards, such as induced earthquakes, pose an escalating threat to the sustainability and safety of the geothermal exploitation. Variations in fault orientations and compression–shear stress ratios exert a profound influence on the failure processes underlying these disasters. To better understand these effects on the shear failure mechanisms of hot dry rocks, mode-II fracturing tests on granites were conducted at varying loading angles (specifically, 55°, 60°, 65°, and 70°). These tests were accompanied by a comprehensive analysis of the mechanical properties, energy dissipation behavior, acoustic emission (AE) responses, and digital image correlation (DIC)-extracted displacement fields. The tensile–shear properties of stress-induced microcracks were discerned via AE characteristic parameter analysis and DIC displacement decomposition, and the mode-II fracture energy release rate was quantitatively characterized. The results reveal that with increasing compression–shear loading angles, the mechanical properties of granites are weakened, and the elastic strain energy at peak stress gradually decreases, while the slip-related dissipated energy increases. Throughout the fracturing process, the AE count progressively climbs and reaches a peak near catastrophic failure, with an upsurge in low-frequency and high-amplitude AE events. Microcrack distribution concentrates aggregation along the shear plane, reflecting the emergent displacement discontinuities evident in DIC contours. Both the AE characteristic parameter analysis and DIC displacement decomposition demonstrate that shear-sliding constitutes the paramount mechanism, and the fraction of shear-oriented microcracks and the ratio of tangential versus normal displacement escalate with increases in shear stress. This analysis is supported by the heightened propensity for transgranular microcracking events observed through scanning electron microscopy. As the shear-to-compression stress increases, the energy concentration along the shear band intensifies, with the gradient of the fitting line between cumulative AE energy and slip displacement steepening, indicative of a heightened mode-II energy release rate. These results contribute to a deeper understanding of the mode-II fracture mechanism of rocks, thereby providing a foundational basis for early warnings of shear-dominant geomechanical disasters, and improving the safety and sustainability of subsurface rock engineering.

Macro- and Microstructural Characteristics of the Tension–Shear and Compression–Shear Fracture of Granite

Experimental and Numerical Investigation on Shear Failure Behavior of Rock-like Samples Containing Multiple Non-Persistent Joints

Shear failure and mechanical behaviors of granite with discontinuous joints under dynamic disturbance: laboratory tests and numerical simulation

Investigations on the macro‐meso mechanical properties and energy dissipation mechanism of granite shear fracture under dynamic disturbance

Experimental Study on Mechanical Properties and Failure Laws of Granite with Artificial Flaws under Coupled Static and Dynamic Loads

Macro-meso fracture evolution mechanism of hollow cylindrical granite with different hole diameters under conventional triaxial compression

Quantitative investigation of crack propagation and fracture mechanism of fissured granite from the mesoscopic perspective

Experimental research on the mechanical properties and energy transfer of fractured granite under triaxial loading

Uncovering the Fracturing Mechanism of Granite Under Compressive–Shear Loads for Sustainable Hot Dry Rock Geothermal Exploitation

Study on Macro–Meso Failure Mechanism of Pre-fractured Rock Specimens Under Uniaxial Compression

Macro and meso crack evolution of granite specimens with non-straight fissures: A comparison between two bond models

Research and application of macro-micro fracture correlation of heterogeneous granite

Characteristic stress response law and fracture precursor of granite under different dynamic disturbance damage conditions

Strength Characteristics and Failure Mechanism of Granite with Cross Cracks at Different Angles Based on DIC Method

Experimental Investigation of Pre-Flawed Rocks under Dynamic Loading: Insights from Fracturing Characteristics and Energy Evolution

Tensile Strength and Fracture Surface Morphology of Granite Under Confined Direct Tension Test

Macro–Meso Fracture and Instability Behaviors of Hollow-Cylinder Granite Containing Fissures Subjected to Freeze–Thaw–Fatigue Loads

Failure behaviors of fractured granite during loading and unloading under high confining pressure based on acoustic emission multi-parameter analysis

Dynamic Mode II Fracture Characteristics and Shear Surface Morphology of Granite Under Triaxial Confining Pressure

Shear fracture behaviors and acoustic emission characteristics of granite with discontinuous joints under combinations of normal static loads and dynamic disturbances

Mechanical behaviour of weakly filled granite and a unified evaluation method for macro-fine-micro multi-scale fracture characteristics