Abstract:Rock strength and deformation behavior has long been recognized to be closely related to the microstructure and the associated micro-cracking process. A good understanding of crack initiation and coalescence mechanisms will thus allow us to account for the variation of rock strength and deformation properties from a microscopic view. This paper numerically investigates the micro-cracking behavior of Bukit Timah granite by using a grain-based modeling approach. First, the principles of grain-based model adopted in the two-dimensional Particle Flow Code and the numerical model generation procedure are reviewed. The micro-parameters of the numerical model are then calibrated to match the macro-properties of the rock obtained from tension and compression tests in the laboratory. The simulated rock properties are in good agreement with the laboratory test results with the errors less than ±6%. Finally, the calibrated model is used to study the micro-cracking behavior and the failure modes of the rock under direct tension and under compression with different confining pressures. The results reveal that when the numerical model is loaded in direct tension, only grain boundary tensile cracks are generated, and the simulated macroscopic fracture agrees well with the results obtained in laboratory tests. When the model is loaded in compression, the ratio of grain boundary tensile cracks to grain boundary shear cracks decreases with the increase in confining pressure. In other words, the results show that as the confining pressure increases, the failure mechanism changes from tension to shear. The simulated failure mode of the model changes from splitting to shear as the applied confining pressure gradually increases, which is comparable with that observed in laboratory tests. The grain-based model used in this study thus appears promising for further investigation of microscopic and macroscopic behavior of crystalline rocks under different loading conditions.

Macro and meso crack evolution of granite specimens with non-straight fissures: A comparison between two bond models

Modeling Crack Propagation in Heterogeneous Granite Using Grain-Based Phase Field Method

Quantitative investigation of crack propagation and fracture mechanism of fissured granite from the mesoscopic perspective

Cracking Behavior and Acoustic Emission Characteristics of Heterogeneous Granite with Double Pre-Existing Filled Flaws and a Circular Hole under Uniaxial Compression: Insights from Grain-Based Discrete Element Method Modeling

Macro-meso fracture evolution mechanism of hollow cylindrical granite with different hole diameters under conventional triaxial compression

Cracking Behavior and Acoustic Emission Characteristics of Rock Containing a Single Preexisting Flaw

Macro- and Microstructural Characteristics of the Tension–Shear and Compression–Shear Fracture of Granite

Strength Characteristics and Failure Mechanism of Granite with Cross Cracks at Different Angles Based on DIC Method

Research and application of macro-micro fracture correlation of heterogeneous granite

Mode I fracture behavior of heterogeneous granite: Insights from grain-based FDEM modelling

Modeling Micro-cracking Behavior of Bukit Timah Granite Using Grain-Based Model

Strain-softening model for granite and sandstone based on experimental and discrete element methods

Experimental study on mechanical properties and evolution of fracture failure of granite considering initial temperature damage and prefabricated fissure length

Macro–Meso Fracture and Instability Behaviors of Hollow-Cylinder Granite Containing Fissures Subjected to Freeze–Thaw–Fatigue Loads

Creep Behavior and Associated Acoustic Characteristics of Heterogeneous Granite Containing a Single Pre-existing Flaw Using a Grain-Based Parallel-Bonded Stress Corrosion Model

Experimental and numerical investigation on meso -fracture behavior of Beishan granite subjected to grain size heterogeneity

Experimental Study on Cracking Process and Fracture Properties of Granite under Mode I Loading by Acoustic Emission and Digital Image Correlation

Experimental Study on Mechanical Properties and Failure Laws of Granite with Artificial Flaws under Coupled Static and Dynamic Loads

Experimental and numerical studies of brittle rock-like specimens with unfilled cross fissures under uniaxial compression

Real-time Experiment Investigations on the Coupled Thermomechanical and Cracking Behaviors in Granite Containing Three Pre-Existing Fissures

Crack propagation process in double-flawed granite under compression using digital image correlation method and numerical simulation