Abstract:Most rockbursts are associated with jointed rock masses as the energy stored inside the rock is prone to abruptly release at such discontinuities. Moreover, remote blasting at working faces can trigger the brittle failure of jointed rocks at opening boundaries. In this work, a testing system combining true-triaxial compression with dynamic disturbance is employed to investigate the failure modes of cuboid jointed granite specimens. A three-dimensional tunneling-induced stress path is created in cuboid jointed granite specimens by first applying static loads to simulate the stress state encountered around an open boundary. Then, a dynamic disturbance (load) is continuously applied to the granite specimen to simulate the effect of the vibrations experienced due to remote blasting. A dynamic disturbance in the σ 2 direction is found to reduce the peak strength of the specimen ( σ p ) by approximately 5% (compared to static stress-induced failure) and promote shearing failure at the fracture surface. The major fracture surfaces form a 'V'-shape, along with several nearby minor cracks. However, a dynamic disturbance in the σ 3 direction can reduce the peak strength by 10% and accelerate the evolution of tensile failure resulting in subvertical tensile fracture. Due to the natural stiffness of the joint, the Poisson's ratio ( υ 3 ) in the ɛ 3 direction is larger than that in ɛ 2 direction, highlighting the anisotropy of the deformation. The proportion of the total stored energy that is released in the jointed rock is greater than that released in intact hard rock. More strain energy is dissipated at the joint fracture. The joint provides a location at which energy can be released, which considerably increases the severity of potential rockbursts. The energy-storage limit of granite with different dip angles is also explored based on complete stress–strain curves. Post-peak granite specimens with joints dipping at 60° are found to be the most susceptible to external dynamic disturbance but release less kinetic energy. Specimens with joints that dip at 80° incorporate the maximum amount of stored energy and are not prone to rockburst when subjected to dynamic disturbance. Once a rockburst does occur in 80°-dipping jointed granite, a strong tremor will appear, however.

Shear fracture behaviors and acoustic emission characteristics of granite with discontinuous joints under combinations of normal static loads and dynamic disturbances

Shear failure and mechanical behaviors of granite with discontinuous joints under dynamic disturbance: laboratory tests and numerical simulation

Experimental and Numerical Investigation on Shear Failure Behavior of Rock-like Samples Containing Multiple Non-Persistent Joints

Characteristic stress response law and fracture precursor of granite under different dynamic disturbance damage conditions

Mechanical Behavior and Acoustic Emission Characteristics of Intact Granite Undergoing Direct Shear

Failure behaviors of fractured granite during loading and unloading under high confining pressure based on acoustic emission multi-parameter analysis

Rock damage and fracture characteristics considering the interaction between holes and joints

Triaxial experimental study of mechanical behavior of non-persistent jointed granite subjected to slight cyclic dynamic disturbances

Experimental study on the shear and acoustic emission characteristics of jointed rocks

Prediction and critical transition mechanism for granite fracture: Insights from critical slowing down theory

Study on the damage mechanism of granite containing prefabricated non-through joints

Effect of lateral stress on shear strength of jointed hard rocks in true triaxial single-shear test

Quantifying the Progressive Fracture Damage of Granite Rocks by Stress–Strain, Acoustic Emission, and Active Ultrasonic Methods

Mechanical responses and fracturing behavior of jointed rock masses with a cavity under different dynamic loads

Experimental research on the mechanical properties and energy transfer of fractured granite under triaxial loading

Natural joint effect on mechanical characteristics and fracture evolution of In-Site rocks under uniaxial compression

Experimental Study on Acoustic Emission Features and Energy Dissipation Properties during Rock Shear-Slip Process

Experimental Study on Mechanical Properties and Failure Laws of Granite with Artificial Flaws under Coupled Static and Dynamic Loads

The Influence of Joint Inclination and Opening Width on Fracture Characteristics of Granite under Triaxial Compression

Experimental Study on Cracking Process and Fracture Properties of Granite under Mode I Loading by Acoustic Emission and Digital Image Correlation

Failure Modes of Jointed Granite Subjected to Weak Dynamic Disturbance Under True-Triaxial Compression