Abstract:Ni-based composite coatings have been widely used for various industrial applications due to their high electrical and thermal conductivity, hardness, corrosion resistance, wear resistance and magnetic properties. For example, the Ni alloy matrix provides good thermal conductivity, electrical conductivity and magnetic properties (Ni–Cu, Ni–Fe, Ni–P, Ni–B). The carbonaceous material reinforcement in pure Ni and alloy matrix (carbon nanotube, graphene and graphite) provides good thermal and electrical conductivities along with good mechanical and tribological properties. Further, the addition of ceramic particles (SiC, Al 2 O 3 , TiO 2 , ZrO 2 , Si 3 N 4 , TiN, AlN, TiC, etc.) in the pure and alloy matrix provides good mechanical, tribological and corrosion resistance properties. Thus, the ceramic particle-reinforced composite coatings can be used for several industrial applications such as automobiles, aerospace, oil and gas industries. The present review aims to provide an insight into the effect of processing parameters and ceramic particle reinforcements (oxides, carbides and nitrides) on the mechanical, tribological and electrochemical performance of the Ni-based electrodeposited coatings. It is noted that the pulse current (PC) method provides more uniform and compact coatings as compared to the direct current (DC) method. Further, it was observed that the co-deposition parameters, such as electrolyte bath concentration, current density and temperature, affect the properties of the coatings. Furthermore, the Ni-based PC-electrodeposited composite coatings reinforced with ceramic particles are reviewed in detail. It was observed that the fine grain structure in the coatings improves the mechanical strength of coatings due to the grain size strengthening mechanism. Moreover, the nano-sized ceramic particle reinforcement enhances the mechanical and tribological performance of the coatings due to their high hardness (particle strengthening) and uniform distribution (dispersion strengthening). Besides, the ceramic particle in the coatings reduces the tendency of localized and pitting corrosion mechanisms owing to their chemically inert nature and uniform distribution throughout the surface.

Studies on Pitting Corrosion of Pulsed Electrodeposited Nanocomposite Coating

Study of pulse electrodeposition parameters for nano YSZ-Ni coatings and its effect on tribological and corrosion characteristics

Impact of calcium zirconate nanoparticles on the mechanical and anti-corrosion properties of Ni-P coatings

Fabrication of Pb-Co-ZrO 2 nanocomposite coatings and correlation of corrosion mechanisms with electronic work functions

Pulsed electroplating of ZrO2-reinforced Ni-Cr alloy coatings from the duplex complexing agents-containing bath for engineering applications: Importance of operating conditions

The Influence of Pulse Plating Parameters on the Structure and Corrosion Behavior of Ni-W-TiC Nanocomposite Coatings

Structure and corrosion property of pulse electrodeposited nanocrystalline nickel-tungsten-copper alloy coating

Corrosion Studies on Pulse Reverse Ni-Mo Coatings Electrodeposited on Cu Substrate

Influence of processing parameters on final characteristics of Ni-P-MWCNT coatings produced by pulsed electrodeposition

Effect of Pulse Electrodeposition Mode on Microstructures and Properties of Ni-TiN Composite Coatings

Corrosion Resistance of Ni-CeO_2 Nanocomposite Coatings Prepared by Pulse Electrodeposition in an Ultrasonic Field

Electrochemical Coating of PANI/Nanometal Oxide Composites on 304 L Stainless Steel Surface and Investigation of Corrosion Behavior

A review on mechanical, tribological and electrochemical performance of ceramic particle-reinforced Ni-based electrodeposited composite coatings

Effect of current density on the microstructure and hardness of Ni-CeO2 nanocomposite coating synthesized by pulse electrodeposition technique

Electrochemical behavior and electro-crystallization mechanism of Cu-Ni/Nano-Al 2 O 3 coating with a deposition current density dependence

Preparation and Investigation of Ni–Co–P Alloy Coatings Using Jet Electrodeposition with Varying Pulse Parameters

Enhancement of Corrosion and Wear Resistance of Ni-P Coatings Stems from the Synergistic Effects of Cr3C2 and Heat Treatment

Effect of chamber pressure on defect generation and their influence on corrosion and tribological properties of HIPIMS deposited CrN/NbN coatings

Mechanical and Corrosion Resistance Properties of Tio2 Nanoparticles Reinforced Ni Coating by Electrodeposition

Effects of Direct and Pulse Plating on the Co-Deposition of Sn–Ni/TiO2 Composite Coatings

Influence of Pulse Current Forward-Reverse Duty Cycle on Structure and Performance of Electroplated W–Cu Composite Coatings