Abstract:Rail transport is the most sustainable transportation mode, with the lowest energy consumption and carbon footprint. However, the noise induced by railway traffic in urban regions is a significant drawback and several reports point out the risks and the amount of people suffering from direct exposure to railway noise. One of the most used mitigation measures for railway noise is the implementation of noise barriers. Although they offer a significant reduction in noise levels, their height makes people feel enclosed. Therefore, in the case of railway infrastructure, the solution to the problem may lie in the use of barriers with a lower height placed close to the railway track. As the noise-forming mechanisms are mainly located at the track level, placing the barrier in a position close to the track allows mitigating rail noise without causing the problems identified above for the population in the vicinity. The purpose of this paper is to illustrate the development of a barrier solution to be used in a railway context through numerical modelling with the Boundary Element Method (BEM). The solutions developed were placed close to the track and have a low height. The geometry was defined so as to direct the energy back to the track to take advantage of the acoustic properties of the ballast. The addition of a porous granular material on the inner face of the barrier allows the control of reflections between the vehicle body and the barrier, increasing its acoustic efficiency. Finally, considering the most efficient solution, the insertion loss in a network of receivers located 10 m away from the track is analysed in order to study the noise reduction levels in a place where human receivers are usually located.

STV: Silencing goods traffic. Part 2: Demonstrating practical low noise solutions

An Acoustic Black Hole Absorber for Rail Vibration Suppression: Simulation and Full-Scale Experiment

[Optimally Control Urban Railway Noise by Sound Propagation Path].

In‐service testing of rail transit noise control treatments

A step-by-step experimental characterization of a low-height acoustic barrier for railway applications

Friction Management as a Sustainable Solution for Controlling Noise at the Wheel-Rail Interface

Vibration damping to control railroad wheel squeal

Research on Aerodynamic Noise Reduction for High-Speed Trains

Railway Ground Borne Noise (GBN) Reduction by Rail Dampers

Unsteady FW-H Simulation of the Aerodynamic Noise of a High Speed Train Bogie

Effects of Steel Spring Floating Slab on Vibration and Noise of a Rail Transit Box-Girder

Investigation of Environmental Vibration Control for High Speed and Heavy Haul Railway

Prediction and audio synthesis of vehicle pass‐by noise

Performance of Low-Height Railway Noise Barriers with Porous Materials

Research on Noise Reduction Performance of Wheel–Rail with Amplitude Amplifying Vibration Absorber

Integrated design of passive control methods for mitigating vibration and noise of rails in high-speed railway

Forests as natural metamaterial barriers for urban railway-induced vibration attenuation

Sound source distribution of high-speed trains and reduction of aerodynamic bogie noise

Acoustic–vibration characteristics and low–structural–noise optimization design of upright sound barrier for rail transit

Additional noise reduction with diffracting elements on barriers using numerical and standard calculation methods

Rail and wheel vibration absorber performance testing.