Abstract:High-speed-railway-train interior noise at low, medium, and high frequencies could be simulated by finite element analysis (FEA) or boundary element analysis (BEA), hybrid finite element analysis–statistical energy analysis (FEA–SEA) and statistical energy analysis (SEA), respectively. First, a new method named statistical acoustic energy flow (SAEF) is proposed, which can be applied to the full-spectrum HST interior noise simulation (including low, medium, and high frequencies) with only one model. In an SAEF model, the corresponding multi-physical-field coupling excitations are firstly fully considered and coupled to excite the interior noise. The interior noise attenuated by sound insulation panels of carriage is simulated through modeling the inflow acoustic energy from the exterior excitations into the interior acoustic cavities. Rigid multi-body dynamics, fast multi-pole BEA, and large-eddy simulation with indirect boundary element analysis are first employed to extract the multi-physical-field excitations, which include the wheel–rail interaction forces/secondary suspension forces, the wheel–rail rolling noise, and aerodynamic noise, respectively. All the peak values and their frequency bands of the simulated acoustic excitations are validated with those from the noise source identification test. Besides, the measured equipment noise inside equipment compartment is used as one of the excitation sources which contribute to the interior noise. Second, a full-trimmed FE carriage model is firstly constructed, and the simulated modal shapes and frequencies agree well with the measured ones, which has validated the global FE carriage model as well as the local FE models of the aluminum alloy–trim composite panel. Thus, the sound transmission loss model of any composite panel has indirectly been validated. Finally, the SAEF model of the carriage is constructed based on the accurate FE model and stimulated by the multi-physical-field excitations. The results show that the trend of the simulated 1/3 octave band sound pressure spectrum agrees well with that of the on-site-measured one. The deviation between the simulated and measured overall sound pressure level (SPL) is 2.6dB(A) and well controlled below the engineering tolerance limit, which has validated the SAEF model in the full-spectrum analysis of the high speed train interior noise.

Unsteady FW-H Simulation of the Aerodynamic Noise of a High Speed Train Bogie

On the feasibility of a component-based approach to predict aerodynamic noise from high-speed train bogies

Research on Aerodynamic Noise Reduction for High-Speed Trains

Step-by-Step Numerical Prediction of Aerodynamic Noise Generated by High Speed Trains

Anechoic wind tunnel noise tests for high-speed train bogie aerodynamic noise characterization

Aerodynamic noise characteristics of high-speed train foremost bogie section

The effect of bogie side components on the aerodynamic noise generation of the leading car of a high-speed train

Computational study on aerodynamic noise reduction of high-speed train bogie region using leading edge jet of the bogie cavity

Unsteady Simulation for a High-Speed Train Entering a Tunnel

Aerodynamic and Noise Computations of High-Speed Train and Tunnel Interaction

Numerical investigation into characteristics of far-field aerodynamic noise radiated by inter-coach space of high-speed maglev trains

Estimation of Aerodynamic Bogie Noise Through Field and Wind Tunnel Tests

Computational Modelling of the Aerodynamic Noise of the Full-Scale Pantograph of High-Speed Trains

Prediction of High-Speed Train Full-Spectrum Interior Noise Using Statistical Vibration and Acoustic Energy Flow

Anechoic wind tunnel tests on high-speed train bogie aerodynamic noise

Effect of Bogie Cavity End Wall Inclination on Flow Field and Aerodynamic Noise in the Bogie Region of High-Speed Trains

Aerodynamic Noise Radiating from the Inter-Coach Windshield Region of a High-Speed Train

A Full-Spectrum Analysis of High-Speed Train Interior Noise under Multi-Physical-Field Coupling Excitations

Calculation of Full-Spectrum Interior Noise of High-Speed Train with SAEF Method

Adaptability of Turbulence Models for Pantograph Aerodynamic Noise Simulation

Numerical Computation of Aerodynamic Noise Reduction by Using Ultra-Light Porous Metals