Abstract:Compared with traditional finite element analysis and statistical energy analysis, the energy finite element analysis (EFEA) has the advantages of small computations and solving local responses in large-scale complex structures. In this paper, the structural sound insulation effect is introduced to EFEA for predicting and analyzing interior noise responses of extruded structures in a high-speed train. Firstly, the carriage structure and cavity models are established based on EFEA theory, and model parameters are obtained through experiments and effective simulations. Mechanical and acoustic excitation sources of the high-speed train are extracted through multi-body dynamic simulation, acoustic finite element method and nonlinear acoustic solution. The reliability of predicted excitations is validated by verifying the amplitude peak frequency bands. The interior noise responses at several observations are obtained and in good agreement with on-site test results, and the EFEA prediction model of interior noise is verified accurately. Secondly, the energy contribution of exterior excitation sources to interior noise responses is analyzed based on EFEA model. The results indicate that acoustic excitations dominate the acoustic energy in the frequency bands above 800 Hz, and the energy contribution of mechanical excitations and acoustic excitations is relatively close in the frequency bands below 600 Hz. The contribution of aerodynamic noise excitations is predominantly concentrated in the frequency bands below 500 Hz, while that of wheel-rail noise excitations is concentrated in the frequency bands above 800 Hz. In the frequency bands below 1250 Hz, the energy contribution of rail noise excitations is much more important than that of wheel noise excitations, while their contribution gets gradually close in the frequency bands above 1600 Hz. Besides, the acoustic excitations at the bottom of the carriage are quite important sources. Finally, wheel-rail noise excitations are optimized with spoke-shielding damping wheels and dynamic vibration absorbers, and the sound pressure level in the amplitude peak bands is reduced by about 8 dB. The interior noise responses are reduced by about 3–5 dB in the frequency bands above 800 Hz, and total loudness, sharpness and roughness at different locations are decreasing by more than 1 sone, 0.05 acum and 0.03 asper respectively. Therefore, wheel-rail noise optimizations have good reduction effects on interior noise responses in the high frequency bands.

Effect of Bogie Cavity End Wall Inclination on Flow Field and Aerodynamic Noise in the Bogie Region of High-Speed Trains

Computational study on aerodynamic noise reduction of high-speed train bogie region using leading edge jet of the bogie cavity

The effect of bogie side components on the aerodynamic noise generation of the leading car of a high-speed train

Aerodynamic noise characteristics of high-speed train foremost bogie section

Aerodynamic optimization using passive control devices near the bogie cabin of high-speed trains

Aerodynamic Noise Radiating from the Inter-Coach Windshield Region of a High-Speed Train

Anechoic wind tunnel noise tests for high-speed train bogie aerodynamic noise characterization

Numerical investigation into characteristics of far-field aerodynamic noise radiated by inter-coach space of high-speed maglev trains

Anechoic wind tunnel tests on high-speed train bogie aerodynamic noise

Effect of cavity flow control on high-speed train pantograph and roof aerodynamic noise

Research on Aerodynamic Noise Reduction for High-Speed Trains

Investigation on the Influence of Inter-car Windshield Types on the Aerodynamic Noise of High Speed Trains

Effect of non-fully enclosed windshield on aerodynamic and acoustic behaviors of high-speed train

Unsteady FW-H Simulation of the Aerodynamic Noise of a High Speed Train Bogie

Effect of car-body lower-center rolling on aerodynamic performance of a high-speed train

Influence of ground effect on flow field structure and aerodynamic noise of high-speed trains

On the feasibility of a component-based approach to predict aerodynamic noise from high-speed train bogies

Study on the aerodynamic performance and noise of windshield area in high-speed trains at a frequency of 38 hz

Aerodynamic noise reduction of a gangway in a high-speed train

Effect of simplifying bogie regions on aerodynamic performance of high-speed train

Prediction and energy contribution analysis of interior noise in a high-speed train based on modified energy finite element analysis