Abstract:In order to study the texture evolution and the formation of an inhomogeneous microstructure in hot-rolled plate of grain-orientated silicon steel, Fe3C (hexagonal) and ferrite phases in the subsurface layer were studied using electron backscatter diffraction. The results indicate that fiber texture (ferrite) mainly composed of {441} and (110)[001] Goss oriented grains was formed at a depth of 25% of the thickness of hot-rolled plate. Matrix grains in the subsurface layer were arbitrary separated into irregular large grains (≥40 μm) and fine grains (<40 μm), and the grain boundary characteristics and texture evolution of matrix grains were studied. The results indicated that the formation of the colonies of fine grains was the result of dynamic recrystallization, and high-frequency low-misorientation-angle boundaries (0~20°) were formed between large grains (≥40 μm) and fine grains (<40 μm), which can be considered as the irregularity of large grains caused by solid-state wetting. Due to the texture evolution of large grains (≥40 μm), a large number of high-energy boundaries (20~45°) were formed between irregular large grains (≥40 μm), resulting in rapid consumption between adjacent large grains and the elongation of large grains along the rolling direction. Therefore, it can be assumed that the migration of low-misorientation-angle boundaries (0~20°) under solid-state wetting and high-energy boundaries (20~45°) are important mechanisms for non-uniform grain growth in hot-rolled plate of grain-orientated silicon steel.

Computer simulation of microstructure evolution in strip-cast silicon steel with cube and fibre texture

Evolution of cube texture in strip-cast non-oriented silicon steels

Microstructure and texture evolution of strip casting 3 wt% Si non-oriented silicon steel with columnar structure

Texture Evolution during Recrystallization and Grain Growth in Non-Oriented Electrical Steel Produced by Compact Strip Production Process

Microstructure and Texture Evolution of Strip-Cast and Hot-Rolled Fe-3 %si Steel Sheet

Significant effect of as-cast microstructure on texture evolution and magnetic properties of strip cast non-oriented silicon steel

Development of microstructure and texture in strip casting grain oriented silicon steel

Microstructure and texture evolution of thin-gauge non-oriented silicon steel with high permeability produced by twin-roll strip casting

Evolution of the Shear Band in Cold-Rolling of Strip-Cast Fe-1.3% Si Non-Oriented Silicon Steel

Microstructure, texture and magnetic properties of strip-cast 1.3% Si non-oriented electrical steels

Texture-Differentiated Grain Growth in Silicon Steel: Experiments and Modeling

The Significance of Microstructure and Texture on Magnetic Properties of Non‐Oriented Silicon Steel: Strip Casting versus Conventional Process

Effect of Cold Rolling Process on Microstructure, Texture and Properties of Strip Cast Fe-2.6%Si Steel

Simulation for microstructure evolution of Al-Si alloys in solidification process

Microstructural Characterization of Non-Oriented Low Silicon Steel Produced by Compact Strip Production

Simulation of Recrystallization Based on EBSD Data Using a Modified Monte Carlo Model That Considers Anisotropic Effects in Cold-Rolled Ultra-Thin Grain-Oriented Silicon Steel

Electron Backscatter Diffraction Analysis of Low-Misorientation-Angle Boundary and High-Energy Boundary in the Hot-Rolled Plate of Grain-Orientated Silicon Steel

A comprehensive study on texture evolution and recrystallization mechanism of Fe-4.5 wt% Si with strong {114}

Evolutions of Microstructure and Crystallographic Texture in an Fe-1.2 wt.% Si Alloy After (A)Symmetric Warm Rolling and Annealing

Effect of recrystallization annealing temperature on microstructure, texture and magnetic properties of non-oriented silicon steel produced by strip casting

Effect of annealing after strip casting on microstructure, precipitates and texture in non-oriented silicon steel produced by twin-roll strip casting