Abstract:SiC fibers can be used to reinforce a range of titanium base materials including alloys of the (alpha+beta) type, metastable beta type and near a type, as well intermetallic based gamma-TiAl and orthorhombic Ti2AlNb. Along the fiber directions the obtained composites possess exceptional strength and stiffness, creating a large room and great flexibility for the design of higher performance components to be used in both aero engine and aircraft. The composites can be used by itself such as in sheet and bar form, or as a reinforcing module embedded in titanium alloy components, e.g., as a ring at the rim of a compressor disk. In this paper, recent progress in the development and application of SiC fiber reinforced titanium matrix composites was reviewed, emphasizing the work conducted at the Institute of Metal Research, Chinese Academy of Sciences. Five aspects of research were covered, the first is fiber manufacture and batch production, in which the influence of the chemical vapor deposition parameters on the quality of the W-core SiC fiber was discussed, and the relationship between the tungsten-SiC interface reaction and the high temperature stability of the fiber was described. The second part covers the composite interface, in which a detailed discussion was given to both the chemical and physical compatibility, followed by the design of different reaction layers between the SiC fiber and different titanium based matrixs. The mechanical property section presents tensile data of a range of composites developed in the authors' group and compares to literature reports where available, together with a comprehensive discussion of failure due to fatigue and creep. The fourth part deals with non-destructive testing, presenting new results of inspection on real size composite components using a combination of several techniques including X-ray, industrial CT and ultrasonic scanning. The limitations of each method were shown and the technical challenges were identified. The last part describes the development of structural parts and their verification testing. Titanium matrix composite sheets with [0/90] laminate prepared by both the foil-fiber-foil and matrix coated fiber methods were highlighted, followed by a description of the development of full size bladed ring and excess revolution testing. Future directions of research on SiC fiber reinforced titanium matrix composites were also discussed.

A review of third generation SiC fibers and SiCf/SiC composites

Progress in Research on Wide Band-Gap Semiconductor SiC and Its Application

Advancements And Prospects in Third-Generation Semiconductor Materials: A Comprehensive Analysis

The Application Status of the Third Generation of Semiconductor Materials in the FIeld of Electric Power

Recent progress on wet-oxygen corrosion resistance of SiC f /SiC composites

Research progress in high thermal conductivity of silicon carbide matrix composites reinforced with fibers

Microstructure evolution, property analysis, and interface study of 3%CF-3%SiC-10%SiC functional gradient aluminum matrix composites

Advances in Sic Fiber Reinforced Titanium Matrix Composites

Current status and recent research achievements in SiC/SiC composites

One-dimensional SiC Nanostructures: Designed Growth, Properties, and Applications

Development of The Third Generation of Semiconductors with SiC and GaN as The Mainstay

Interfacial Mechanical Properties of the Domestic 3rd Generation 2.5D SiCf/SiC Composite

Synthesis, fabrication, and applications of Ti3SiC2/SiC ceramics: a review

Research Progress on Microstructure Characterization of Silicon Carbide Fibers

Recent progress in the development of SiC composites for nuclear fusion applications

High-temperature tensile behavior of 3D SiC/SiC composites

Microstructure and mechanical properties of SiC f /SiC composite prepared by chemical vapor infiltration

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): Joining processes, joint strength, and interfacial behavior

Study of properties research on instrument grade SiC/Gr/Al composites

Fabrication and characterization of carbon fiber reinforced SiC ceramic matrix composites based on 3D printing technology