Abstract:With the rapid development of high-speed railway (HSR) in China, the problem of environmental vibration induced by HSR train has attracted critical concern. In this paper, a combination vibration reduction (CVR) strategy of hollow-closed-wall in-filled trench (HIT) and elastic bearing (EB) is proposed to decrease environmental vibration induced by HSR train, in which the depth of HIT could be well controlled to benefit the practical construction and economic cost. Based on the multi-body dynamics and finite element theory, HSR environmental vibration system is established and then divided into two sub-models including the 'train-track-bridge' vibration source sub-model and the 'pile-soil' vibration propagation sub-model. The two sub-models are connected via the force balance condition of the pier bottom. The verification of numerical models is conducted by comparing with the empirical formula and the ground data in the references. Then the attenuation law of environmental vibration is analyzed, and the vertical component is shown to be dominant in the HSR environmental vibration. On this basis, numerical simulations are performed to analyze the environmental vibration reduction under three strategies, namely the HIT, EB, and CVR. The results show that the HIT presents a distinct vibration reduction effect in the frequency range above 4 Hz and the vibration reduction becomes more obvious as the HIT's depth increases. However, the depth should be larger than 8 m to satisfy the code requirement; the EB presents an obvious reduction in the frequency range above 8 Hz; the CVR strategy not only further decrease the environmental vibration, but also effectively reduce the HIT's depth. By numerical analysis, the combination strategy of 6 m deep HIT and 2200 kN/mm vertical stiffness EB is recommended in the HSR environmental vibration reduction, which could also satisfy the limit of Chinese railway code.

Vibration control mechanism of the metabarrier under train load via numerical simulation

An Acoustic Black Hole Absorber for Rail Vibration Suppression: Simulation and Full-Scale Experiment

A Novel Method to Solve the Existed Paradox of Low-Frequency Vibration Isolation and Displacement Attenuation in a Nonlinear Floating-Slab on the Wheel-Rail Loads

Effects of Steel Spring Floating Slab on Vibration and Noise of a Rail Transit Box-Girder

Numerical analysis of engineered metabarrier effect on ground vibration induced by underground high-speed train

New Floating Slab Track Isolator for Vibration Reduction Using Particle Damping Vibration Absorption and Bandgap Vibration Resistance

Study on Isolation Efficiency of Floating Slab Track Using a Numerical Prediction Model of Metro Traffic Induced Vibrations

A Combination Strategy of Hollow-Closed-wall In-Filled Trench and Elastic Bearing for Reducing Environmental Vibration Induced by High-Speed Train

An Analytical Formulation to Model Geometric and Resonant Scattering of Buried Metabarriers for Traffic-Induced Vibrations Mitigation

Influence of Vibration Isolator Failure on Vehicle Operation Performance and Floating Slab Track Structure Vibration Reduction Effectiveness

Low frequency vibration reduction method for floating slab tracks based on tuned viscous mass damper

Vibration Characteristics of Discretely-Supported Floating Slab Track under Moving Load

Vibration Reduction Performance of a Periodic Layered Slab Track

Human Simulated Intelligent Control On Magneto-Rheological Vibration Isolation System For Subway Floating Slab Track With Moving Load

Vibration-reduction optimization of the point-supporting floating-slab track based on local resonance mechanism

On Effectiveness of Vibration Isolation Using Super-Elastic Rail Support Combined with Booted Sleeper or Floating Slab

Ultra-low frequency vibration control of urban rail transit: the general quasi-zero-stiffness vibration isolator

Floating slab track integrated with quasi-zero stiffness mechanism and dynamic vibration absorber for suppressing low-frequency vibration

Analysis of Vibration Reduction Effect of the Floating Slab Track with Different Base Forms in a Small Radius Curve of Subway Lines

Vibration attenuation performance of isolator based on locally resonant phononic crystal via train load

Experimental study on the vibration reduction characteristics of the floating slab track for 160 km/h urban rail transit