Abstract:Stirling-type pulse tube cryocoolers (SPTCs) working at liquid-helium temperatures are attractive in space applications because they have advantages of high reliability, compactness, etc. However, the refrigeration efficiency is as low as 0.5% of Carnot efficiency or less. A method of increasing the cross-sectional area of the regenerator at the colder part is proposed in this paper, so as to reduce the heat-associated enthalpy flow at the cold end and improve the performance of the regenerative refrigerators at liquid-helium temperatures, and it is verified through experiments for the first time. Two kinds of variable cross-sectional structures are used in the experiments, which both increase the volume of the regenerator at the colder part. The no-load temperature of the refrigerator reaches 3.87 K, which is about 0.14 K lower than that of the refrigerator with a uniform cross-sectional regenerator under the same working conditions, and the coefficient of performance (COP) is increased by 66% at 4.2 K, and the precooling temperature is 16 K in this case. Theoretical analyses show that there are several reasons for reducing the heat-associated enthalpy flow at the cold end, including: (1). increase of the heat transfer area between the working fluid and the matrix; (2). increase of the total heat capacity of the matrix at the cold end. It is found that the lower the refrigeration temperature, the more serious the real gas effect, resulting in a more significant improvement. However, the increase in the cross-sectional area causes some side effects of reducing both the impedance of the regenerator and the flow rate of the working gas, resulting in a lower heat transfer coefficient. A smaller benefit is got as the refrigeration temperature rises, and the improvement of the COP tends to vanish at about 6 K. It is also found that the performance improvement is more significant when the regenerative efficiency is lower. This new method should provide a reference for further improving the performance of the regenerative refrigerator at liquid-helium temperatures.

Theoretical analysis on pressure drop across porous cryocooler regenerator in evaluating the optimum regenerator porosity

Performance analysis of a micro-scale pulse tube cryocooler based on optical fiber regenerator

Effect of Porosity of the regenerator on the performance of a miniature Stirling cryocooler

Simulation and performance analysis of fiber-based regenerator in a pulse tube cryocooler

Simulation and analysis of influence of pressure ratio on regenerator performance

Characteristics of Steady and Oscillating Flows Through Regenerator

Experimental Study of Pressure Drop-Flow Rate Characteristics of Heated Tight Porous Materials

Experimental Investigation of Regenerator Matrices on Performance of Pulse Tube Cooler

Varying the Cross-Sectional Area of the Regenerator for Improving the Refrigeration Efficiency at Liquid-Helium Temperatures

Influence of Input Acoustic Power on Regenerator’s Performance

Performance Analysis on Free-Piston Stirling Cryocooler Based on an Idealized Mathematical Model

Influence of Regenerator Void Volume on Performance of a Precooled 4 K Stirling Type Pulse Tube Cryocooler

Theoretical and Experimental Study on a Pulse Tube Cryocooler Driven with a Linear Compressor

Optimization Design and Experimental Study on a 2 . 8 W at 80 K Stirling Cryocooler Regenerator

Varying Cross-Sectional Area of Regenerator for Improving Efficiency of 4 K Pulse Tube Refrigerator

Numerical study on regenerative effectiveness of parallel-plate regenerator for Stirling engine

Parameter effect analysis for a Stirling cryocooler

Theoretical and Experimental Investigation of A 4 K Single-Stage Stirling Type Pulse Tube Cryocooler with Precooling

NUMERICAL SIMULATION OF FLOW AND HEAT TRANSFER CHARACTERISTIC OF 4K REGENERATORS AT HIGH FREQUENCY

Study on temperature inhomogeneity in regenerator of high-power Stirling-type pulse tube cryocoolers based on two parallel regenerator model

Investigation On The Regenerator Performance Using Gas Mixtures