Abstract:Tube arrangement largely determines the flow structure as well as aero-thermal performance in finned tube heat exchangers (FTHXs). Most of the previous studies did not cover both overall performance and local thermal flow characteristics due to the physical complexity. This work is related to the comparison of various aero-thermal behaviors of rectangular finned elliptical tube heat exchangers (RFETHXs) with different tube arrangements in a turbulent flow region, from basic characteristics to optimal structures. Using 3-D numerical simulation based on the validated standard k-epsilon model, the local thermal flow characteristic as well as overall dimensional and dimensionless performances of three arrangements is investigated. Then, using variance analysis, the contribution of each structural parameter of the three arrangements on overall performance is compared after the screening of the factor of longitudinal tube pitch. Using the same CFD data as variance analysis, an elliptical basis function (EBF) model of each type of arrangements is constructed to understand the distribution of j/j(0.5) as well as PEC in the parameter range of this work. Moreover, optimal structural parameters of each arrangement are provided. It is observed that, each tube arrangement presents its own characteristic of flow separation and heat transfer coefficient distribution on fins. For the in-line and staggered row arrangements, the contributions of all the main factors and the two-way interactions on various overall performances are close, while the situation of the staggered column is different. The influence of two-way interactions is marginal in the staggered column structure, while it cannot be neglected in the two other arrangements in most cases. For j/j(0.5), the optimal structural parameter combination of the in-line and staggered row arrangements is fin thickness 0.6 mm, fin pitch 2 mm and transverse tube pitch 54 mm, whereas that of the staggered column arrangement is 0.6 mm, 2 mm and 70 mm in turn. (C) 2019 Elsevier Ltd. All rights reserved.

Development of new finned tube heat exchanger: Innovative tube-bank design and thermohydraulic performance

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

Thermal-Hydraulic Performance and Optimization of Tube Ellipticity in a Plate Fin-And-Tube Heat Exchanger

Prediction of optimal dimensions and arrangements of circular tubes of a fin and tube heat exchanger for an improved thermal-hydraulic performance

Numerical Investigation Of Effect Of Tube Shape On Air-Side Heat Transfer And Pressure Drop Characteristics Of A Finned Tube Heat Exchanger

Aero-thermal Behavior and Performance Optimization of Rectangular Finned Elliptical Heat Exchangers with Different Tube Arrangements

CFD Study of the Thermal Performance Improvement of a Counter-Flow Heat Exchanger Using Enhanced Surface Tubes

Numerical investigation on effects of using segmented and helical tube fins on thermal performance and efficiency of a shell and tube heat exchanger

Successive expansion and contraction of tubes (SECTs) in a novel design of shell-and-tube heat exchanger: a comparison between basic, finned and non-finned designs

Structural Optimization of Self-Supporting Rectangular Converging-Diverging Tube Heat Exchanger

An Implementation Investigation on Hydrothermal Behavior of Heat Exchanger with a Novel Finned Tube Designed

Thermodynamic and hydraulic design characteristics of the fin tube heat exchanger

Heat Transfer and Pressure Loss In Combined Tube Banks With Triple-Finned Tubes

Numerical studies on heat transfer and pressure drop characteristics of flat finned tube bundles with various fin materials

Heat transfer simulation of annular elliptical fin-and-tube heat exchanger by transition SST model

Numerical Analysis of Geometry Influence on Heat Transfer in a Slotted Fin and Tube Heat Exchanger

Comparison of Different Fin and Tube Compact Heat Exchanger with Longitudinal Vortex Generator in CFU-CFD Configurations

Investigation of a Falling Film Tube Bank Heat Exchanger with Baffle Design for Water Recovery Applications

Shape and Layout Optimization of Bare-Tube Heat Exchangers Using the Adjoint Method and CAD-based Parametrization

Heat transfer enhancement investigation in a novel flat plate heat exchanger

Design optimization of a high-temperature fin-and-tube heat exchanger manifold – A case study