Abstract:3D-printed carbon fiber composites hold significant potential in aerospace applications because of their lightweight, high strength and complex structure fabrication capabilities. However, additive manufacturing characteristics such as high porosity, anisotropy and continuous fiber content significantly affect the mechanical properties of printed parts. The aim of this study is to investigate the influence of hybrid printing of short and continuous carbon fibers on the mechanical properties and failure mechanisms of composites and to develop a model to predict elastic properties considering porosity. First, mechanical testing and characterization of short and continuous fiber reinforced polyamide (nylon) print filaments are performed. The results indicate that the elastic modulus and ultimate strength of continuous carbon fiber filaments reach 60 GPa and 1500 MPa, respectively, while the strength and elastic modulus of short carbon fiber filaments reach 60 MPa and 1 GPa, respectively. Then tensile specimens with different continuous fiber orientations and different continuous fiber placement sequences are printed and tested using a multi-material 3D printing technique. The specimens are characterized before and after testing using scanning electron microscopy and microscopy to assess the porosity and failure mechanisms of specimens with different configurations. The results show that the mechanical properties of the printed parts are much lower than those of the print filaments, which proves the serious negative impact of the material extrusion process on the mechanical properties of the printed structural parts. Finally, an analytical method for predicting the elastic behavior of printed composites is developed by introducing the porosity factor in the volume-averaged stiffness model. For continuous and short fiber filled composites with different fiber contents and printing orientations, the predicted results are in agreement with the experiments, and the prediction error is greatly reduced from 30% to less than 5%.

Assessment of anisotropic mechanical properties of a 3D printed carbon whisker reinforced composite

Experimental and Theoretical Studies on 3D Printed Short and Continuous Carbon Fiber Hybrid Reinforced Composites

Mechanical Anisotropy of Aligned Fiber Reinforced Composite for Extrusion-Based 3D Printing

Generalized models for unidirectional anisotropic properties of 3D printed polymers

On Asymmetric Failure in Additively Manufactured Continuous Carbon Fiber Reinforced Composites

An anisotropic constitutive model for 3D printed hydrogel-fiber composites

Investigating the tensile properties of 3D printed semi-woven intraply hybrid composites reinforced with carbon/glass continuous fibres

Investigation on the mechanical properties of 3D printed hybrid continuous fiber-filled composite considering influence of interfaces

Exploring Anisotropic Mechanical Characteristics in 3D-Printed Polymer Biocomposites Filled with Waste Vegetal Fibers

An investigation into mechanical properties of a 3D printed two-matrix continuous fiber composites with multi-cavity structure

Process evaluation, tensile properties, mathematical models, and fracture behavior of 3D printed continuous fiber reinforced thermoplastic composites

Experimental and numerical study of orthotropic behavior of 3D printed polylactic acid by material extrusion

Micromechanical modeling and numerical homogenization calculation of effective stiffness of 3D printing PLA/CF composites

Mechanical, microstructural and numerical investigations of 3D printed carbon fiber reinforced PEEK

Rheology Effects on Predicted Fiber Orientation and Elastic Properties in Large Scale Polymer Composite Additive Manufacturing

Characterization of Shear/tensile Mechanical Properties of Three-Dimensional-printed Polylactic Acid Specimens Based on Orthogonal Raster

Experimental and Numerical Investigation of the Mechanical Properties of 3D-Printed Hybrid and Non-Hybrid Composites

A Multiscale Model for Quantifying Fiber Orientation Effects on the Tensile Properties of 3d Printed Engineered Cementitious Composites (3dp-Ecc)

Numerical Homogenization Calculation of Effective Stiffness of Fused Deposition Modeling Printing Carbon Fiber Reinforced Polylactic Acid Composites

Multiscale analysis for characterization of tensile properties in extrusion-based 3D printed carbon nanocomposites

Mechanical Characterization of 3D Printed Continuous Carbon Fiber Reinforced Thermoplastic Composites