Effect of heat treatment on microstructure and mechanical properties of WE43 alloy fabricated by wire arc additive manufacturing
Zhengtao Liu,Lei Wang,Shuqin Luo,Yicheng Feng,Sicong Zhao,YuanKe Fu
DOI: https://doi.org/10.1016/j.mtcomm.2024.110950
IF: 3.8
2024-11-21
Materials Today Communications
Abstract:Heat treatment is an effective method to improve the mechanical properties of Wire Arc Additive Manufacturing (WAAM) WE43 alloy. This study investigates the effects of heat treatment on the microstructure and mechanical properties of the WE43 alloy processed by WAAM. The as-deposited samples exhibit a uniform equiaxed crystal structure, with grain size gradually increasing as the number of deposited layers grows. The as-deposited microstructure comprises eutectics and a small amount of cubic phases, and the phase content escalates as the amount of deposited layers increases, influenced by the cumulative effect of multiple thermal cycles. At lower solid solution temperatures (480 °C × 8 h), most of the eutectic phase remains undissolved. During tensile testing, undissolved eutectics tend to cause stress concentrations, leading to cracks that result in sample fractures, negatively affecting the mechanical properties. At higher solid solution temperatures (520 °C × 8 h), most of the eutectic dissolves, but abnormal grain coarsening (AGC) in the interlayer fine-grain region occurs, causing a significant reduction in the sample's mechanical properties. After solid solution treatment at 500 °C for 8 h, only a small amount of eutectics remains undissolved, and the AGC phenomenon is not observed, resulting in an optimal solid solution effect. Subsequently, after aging treatment at 225 °C for 18 h, dense nanoscale β′′ phases precipitated within the alloy grains, significantly improving the mechanical properties. The samples achieved optimal performance, with UTS, YS, and EL of 323 ± 15.2 MPa, 225 ± 11.3 MPa, and 8.4 ± 1.1 %, respectively.
materials science, multidisciplinary