Abstract:This study presents a novel roller piston pump,in which a cam guide-roller type rolling support is adopted to replace the sliding pair support of the swash plate-slipper pair to achieve the oil suction and discharge of the piston cavity.In addition,the shaft distribution is used to replace the original valve plate distribution and the driving shaft is used as the distribution shaft to remove the valve plate structure,which greatly simplifies the design of the axial piston pump.Such a configuration largely reduces the number of sliding friction pairs of the pump,and avoids the influence of the sliding friction pair on it under high-speed and variable-speed conditions.Firstly,mathematical models of the mechanical and volumetric efficiencies of the roller pump are deduced respectively through force analysis and the compressibility equation.Based on the numerical simulation of MATLAB and AMESim,the effects of load pressure and rotational speed on mechanical and volumetric efficiencies are studied respectively,and it is verified that the roller pump has no structural flow pulsation.The prototype pump is then designed and built,along with a special test rig.The outlet pressure,outlet flow,and torque of the pump under different load pressures and rotational speeds are measured,and the mechanical and volumetric efficiencies of the prototype pump under various load pressures and rotational speeds are obtained.The experimental results are in good agreement with the simulated analysis.When the load pressure is 8 MPa and the speed is 5000 r/min,the mechanical and the volumetric efficiencies are 85.5%and 96.8%,respectively.When the speed is increased to 10000 r/min,the mechanical and the volumetric efficiencies are 66.7%and 95.6%,respectively.The experimental results show that the proposed roller piston pump has excellent efficiency under wide-speed and high-speed conditions and can be a potential solution as a fuel pump in aerospace fuel systems.

Design and analysis of an axial flux permanent magnet motor for the direct drive radial piston pump

Study on Characteristic Matching and Design of Semi-Direct Drive PMSM of Beam Pumping Unit Based on Indicator Diagram

Basic Characteristics of a 4kw Permanent-Magnet Type Bearingless Slice Motor for Centrifugal Pump System

Design and Fem Analysis of A High Efficiency Axial-Flux Brushless Dc Motor for Flywheel System

Design and Analysis of a Novel Radial Mud Pump Directly Driven by Permanent Magnet Disc Synchronous Motor

Magnetic Field and Force Characteristic of Disc-Type Permanent Magnet Motor for Novel Pumping Unit

Design of direct-drive air compressor drived by permanent magnet brushless DC motor

DESIGN OF IMPLANTABLE AXIAL-FLOW BLOOD PUMP AND NUMERICAL STUDIES ON ITS PERFORMANCE

Design and Experimental Studies of A Novel Double-Row Radial Piston Pump

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

Design of A Novel Axial-Radial Flux Permanent Magnet Motor

Multi-Physics Design and Analysis of Axial Flux Permanent Magnet Motors for In-Wheel Direct-Drive

Design and Optimization of a Permanent Magnet Synchronous Motor for a Two-Dimensional Piston Electro-Hydraulic Pump

Design, Analysis and Improvement of a Disc Motor

Design an Analysis of a Water-Cooled Axial Flux Permanent-Magnet Machine for Large Power Direct-Driven Applications

Design and Optimization of BLDC Machine for Bidirectional Impeller Pump

Theoretical and Experimental Investigation on the Efficiency of a Novel Roller Piston Pump

Design and Experimental Study of Radial Piston Pump With Valve Plate Distribution

Development and Application of Low-Speed and High-Torque Permanent Magnet Synchronous Motor

Design strategy and performance evaluation of novel miniature two-dimensional (2D) piston pump with a dual stacking mechanism

Design and Mechanics Analysis of A Passive Permanent Magnetic Bearing on Axial Electromotor-pump