Abstract:The corner defects in the casting slab greatly influence the product quality. These defects may extend during the heating and rolling process and even result in the discarding of the rolled plate as scrap. A corner cleaning equipment based on the scarfing machine is proposed to eliminate the defects in slab corners for producing high-quality steel. Unlike the flat surface scarfing process, the flame jet and the shape of the molten pool have an essential impact on the effectiveness of the flame cleaning in the corner of the casting slab. A three-dimensional fully coupled model for the flame cleaning nozzle is developed to simulate the flow pattern of the flame jet, Oxygen concentration distribution, and temperature field in the corner of the slab. The simulated flame jet flow field and temperature results agreed well with the factory trial results. Additionally, a three-dimensional thermal model for simulation of the molten pool formed by flame cleaning in the corner of the casting slab has also been developed. For the sake of simplicity, the 2D elliptic and 3D Gauss heat source models are used to simulate the flame heating on the upper and right surfaces of the slab corner and the reaction heating between oxygen and heated iron along the corner, respectively. The simulation results show that the length is 58.1 mm and 57.9 mm on both sides and the corner melting depth is 29.9 mm. The error is 7.04%. The numerical simulation results showed good agreement with the factory trial results, indicating that the proposed models of the flame jet and the heat sources analysis are feasible to study the flame cleaning process of the slab corner, it provides the scientific theoretical basis for the design and practical application of corner scarfing machine.

Numerical Investigation of the Cleaning Flame Jet and Formation of the Molten Pool in the Corner Scarfing Process of the Casting Slab

Effect of cleaning parameters on the molten pool shape and molten slag dynamics in the corner scarfing process of the casting slab

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

A Method to Control the Transverse Corner Cracks on a Continuous Casting Slab by Combining Microstructure Analysis with Numerical Simulation of the Slab Temperature Field

Modeling effects of swirl burners on the heating quality of slabs and flame morphology in a walking-beam reheating furnace

Numerical Investigation on Solidification Behavior of Slab Ingot during Electroslag Remelting Process

Numerical Simulation of the Interaction Between Supersonic Oxygen Jets and Molten Slag–Metal Bath in Steelmaking BOF Process

Mathematical Modeling of Transient Submerged Entry Nozzle Clogging and Its Effect on Flow Field, Bubble Distribution and Interface Fluctuation in Slab Continuous Casting Mold

Chamfer and Taper Researches of Mould in Slab Continuous Casting

Numerical Study on Characteristic Positions and Transition of Flow Patterns in a Slab Continuous Casting Mold

Numerical Simulation of Macrosegregation in Continuously Cast Slab with Application of S-EMS and MR

Physical and Numerical Simulation Study on Structure Optimization of the Inner Wall of Submerged Entry Nozzle for Continuous Casting of Molten Steel

Numerical Analysis of Slag–Steel–Air Four-Phase Flow in Steel Continuous Casting Model Using CFD-DBM-VOF Model

Modeling approach and numerical analysis of a roller-hearth reheating furnace with radiant tubes and heating process optimization

Numerical Simulation of Mold Slag Entrapment Behavior in Nonoriented Silicon Steel Production Process

Numerical Simulation of the Slag Splashing Process in A 120 Ton Top-Blown Converter

Analysis of Longitudinal Cracking and Mold Flux Optimization in High-Speed Continuous Casting of Hyper-Peritectic Steel Thin Slabs

Design of a submerged entry nozzle for optimizing continuous casting of stainless steel slab

Optimization of Flow Field in Slab Continuous Casting Mold with Medium Width Using High Temperature Measurement and Numerical Simulation for Automobile Exposed Panel Production

Analysis and Optimization of Spray Nozzles Arrangement in Slab Casting by Numerical Simulation

Simulation Analysis of Fracture Process of Slag Deposits Surrounding Wall Tubes During Steam Sootblowing