Abstract:Research highlights•High-entropy transition metal carbides with regulatable carbon stoichiometry (HE TMCx) achieve the promoting of formation ability from carbon stoichiometry deviations.•Bulk (Zr0.25Hf0.25Ta0.25Nb0.25)Cx (SPS-ZHTNCx) with carbon stoichiometry deviations show promoted sintering.•Bulk (Zr0.25Hf0.25Ta0.25Nb0.25)Cx (SPS-ZHTNCx) present tunable mechanical properties.Tremendous efforts have been dedicated to promote the formation ability of high-entropy transition metal carbides. However, the majority of methods for the synthesis of high-entropy transition metal carbides still face the challenges of high temperature, low efficiency, additional longtime post-treatment and uncontrollable properties. To cope with these challenges, high-entropy transition metal carbides with regulatable carbon stoichiometry (HE TMCx) were designed and synthesized, achieving improved ability for single phase solid solutions formation, promoting of sintering and controllable mechanical properties. Two typical composition series, i.e., easily synthesized (Zr0.25Hf0.25Ta0.25Nb0.25)C (ZHTNC) and difficultly synthesized (Zr0.25Hf0.25Ta0.25Ti0.25)C (ZHTTC) are selected to demonstrate the promoting formation ability of single phase solid solutions from carbon stoichiometry deviations. Single phase high-entropy ZHTTC, which has been proven difficult in forming a single phase solid solution, can be prepared with the decrease of C/TM ratio under 2000°C; while the high-entropy ZHTNC, which has been proven easy in forming a single phase solid solution, can be synthesized at lower temperatures with the decrease of C/TM ratio. The synergistic effect of entropy stabilization and reduced chemical bond strength gaining from carbon stoichiometry deviations is responsible for the formation of single phase solid solutions and the promoted sintering of HE TMCx. For example, the relative density of bulk (Zr0.25Hf0.25Ta0.25Nb0.25)Cx (SPS-ZHTNCx) increases from 90.98% to 94.25% with decreasing the C/TM atomic ratio from 0.9 to 0.74. More importantly, the room temperature flexural strength, fracture toughness and brittleness index of SPS-ZHTNCx can be tuned in the range of 384 MPa–419 MPa, 4.41 MPa m1/2–4.73 MPa m1/2 and 3.679 μm−1/2–4.083 μm−1/2, respectively. Thus, the HE TMCx prepared by adjusting the ratio of carbon to refractory transition metal oxides have great potential for achieving low temperature synthesis, promoted sintering and tunable properties.

Effects of nitrogen addition and growth condition on the enhanced mechanical properties of transition metal carbides TMC (TM = Zr, Hf)

Effects of Zr Addition on the Deformation Behavior, Microstructure and Mechanical Properties of Dental Ti Alloys

Ab initio study of the alloying effect of transition metals on structure, stability and ductility of CrN

Structural stability, hardness, fracture toughness and wear resistance of refractory metal carbonitrides RMC1-N (RM = Zr, Nb, Hf, Ta) solid solutions from first-principles calculations

Local orders, lattice distortions, and electronic structure dominated mechanical properties of (ZrHfTaM1M2)C (M = Nb, Ti, V)

Oxidation mechanism and mechanical properties of substitutional transition metal modified Nb4AlC3: A first-principles density functional theory study

The role of Cr addition on the processing and mechanical properties of high entropy carbides

Regulating the formation ability and mechanical properties of high-entropy transition metal carbides by carbon stoichiometry

Effect of carbon nanotubes on microstructure and mechanical properties of TiZrVMnCu–Er high entropy alloy composites

A First-Principles Study of Mechanical and Electronic Properties of Cr0.5-xAl0.5TMxN Hard Coatings (TM = Ti, V, Y, Zr, Hf, and Ta)

Understanding the electronic structure, mechanical properties, and thermodynamic stability of (TiZrHfNbTa)C combined experiments and first-principles simulation

Toughening (NbTaZrW)C high‐entropy carbide ceramic through Mo doping

Mechanical Properties of High-Entropy Carbides Prepared by High-Pressure Sintering: Role of Carbon Stoichiometry

Optimization of thermal stability and mechanical properties of Mo2C carbides via multi-element doping: experimental and theoretical calculations

Effect of nitrogen on microstructure and mechanical properties of CrMnFeVTi6 high entropy alloy

FCC-to-HCP Phase Transformation in CoCrNix Medium-Entropy Alloys

New insights into the formation mechanism of the multicomponent carbides (Nb, M)C (M = Ti, Cr and Mn)

First-Principles Study on the Mechanical Properties and Electronic Structure of Nonstoichiometric TiC(1−x)Nx

A practical guideline for designing high-entropy carbides based on (Ti1/3Mo1/3W1/3)C with high valence electron concentration

Einfluss von Sc, Y, Ti, Zr, Hf, V, Nb und Ta auf strukturelle und mechanische Eigenschaften von Cr-Al-N-Schichten

Microstructure evolution and mechanical properties of NbHfTiVCx novel refractory high entropy alloys with variable carbon content