Abstract:<p>A circumferential crack in the fusion line is a major threat to the structural integrity of the pipeline girth weld because it may possibly lead to fracture failure when subjected to large plastic deformations. For the newly constructed X80 pipeline with an outside diameter (OD) of 1422 mm in China, the complicated configuration of welded joints and the outer diameter are outside the range of the general fracture assessment standards, such as BS 7910. Furthermore, during the pipe manufacture process, pipeline designers merely specify the minimum yield strength limit according to the pipe steel grade. This results in a wide variation range in the choice of yield strength values of the base metal. This also leads to a serious problem in the fracture assessment of pipe girth weld because the weld strength is commonly considered to be either evenly matched or overmatched. The foregoing factors make it difficult to perform an accurate fracture assessment using conventional standards. This study therefore aims to investigate the fracture behavior of 1422-mm OD pipelines with a double-V groove weld and circumferential crack in the fusion line. The specific effect of material mismatch and the realistic operational parameters that influence the fracture capacity of the pipe are examined via a series of numerical investigations. First, a rigorous three-dimensional finite element model to simulate the pipe girth weld is established by utilizing the ABAQUS finite element code package. The weld, which has a canoe-shaped surface crack in the fusion line between the heat-affected zone and root welding metal, is subjected to biaxial loading conditions. The keyhole method is adopted to simulate the crack front as well as the crack tip to eliminate the stress singularity effect during deformation. A refined mesh strategy is introduced to ensure the accurate simulation of the stress and strain fields in the vicinity of the crack tip. Based on the numerical model, the J-integral fracture parameter, which is clearly defined based on a strict mechanical theory, is chosen to characterize the effect of strength matching ratio, internal pressure, and yield to tensile strength ratio on the crack driving force. A new strain-based J-integral prediction formula is proposed based on numerical results.</p>

Analysis on Cracking of a Pipeline Steel Pipe during Hydraulic Burst Test

Cause Analysis and Improvement Measures for Pipeline Cracking of 9Cr-1Mo Material

Failure analysis of L415/316L composite pipe welded joint

Cracking Reasons of X70 Steel Submerged Arc Weld Pipe during Guide-Bend Test

Explosion Cracking Analysis of Sulfur Resistance Induction Heat Bend Pipe

Cause Analysis of Leakage Failure of Seamless Steel Pipe during Pipeline Pressure Test

Cracking Analysis on X80 Steel Oil Pipe during JCOE Forming

Analysis of crack causes and effects of the A333 low carbon pipeline steel after thermite welding

Failure analysis of 2205 duplex stainless steel connecting pipe for composite plate pressure vessel in a high pressure gas field

Failure Analysis on Bursted High Temperature Steam Pipe of Heavy Oil Well

Fracture response of 1422-mm diameter pipe with double-V groove weld joints and circumferential crack in fusion line

Fracture Analysis on A Cylindrical Shell Section of the Low-Pressure Absorption Tower

Study on Fracture Behavior and Toughening Mechanisms of Ultra-High-Strength Pipeline Steel

Failure Analysis of Abnormal Bulging and Cracking for High-Pressure Steam Pipe

Ductile crack growth of high-graded pipeline steels in the presence of Lüders plateau

Types and Cause of Cold Bending Crack Defects of Welded Pipe

Analysis and Research on Crack Failure of P91 Pipe

Ductile burst behavior of high pressure X100 steel pipe considering hydrogen damage

Investigation on the Fatigue Crack Propagation Behavior of L360MS Pipeline Steel Welded Joints with Inconel 625 Weld Metal

The fracture resistance and crack propagation path of L415/N08825 bimetallic composite pipe welded joint

Failure analysis of fillet weld crack in linepipe