Phase Transformation and Mechanical Optimization of Eggshell-Derived Hydroxyapatite across a Wide Sintering Temperature Range
Shih-Ching Wu,Hsueh-Chuan Hsu,Mei-Yi Liu,Wen-Fu Ho
DOI: https://doi.org/10.3390/ma17164062
2024-08-15
Abstract:Calcium phosphate, particularly hydroxyapatite (HA), bears a close resemblance to human bones, rendering it a prevalent material in biomedical applications. This study focuses on the successful preparation of HA using a precipitation method with eggshell as a raw material. Subsequently, the HA powder was press-formed and sintered at various temperatures to investigate the impact of sintering temperature on the mechanical properties, including hardness, compressive strength, and fracture toughness, of the sintered HA samples (E-HA). Statistical analyses, including one-way ANOVA and Tukey's post-hoc test, were conducted to determine significant differences in these properties at different sintering temperatures. Experimental findings revealed that as the sintering temperature increased, HA partially transformed into β-TCP between 800 and 1300 °C, with α-TCP observed at 1400 °C. The elimination of pores led to an increase in relative density, with a maximum relative density of 94.5% achieved at 1200 and 1300 °C. E-HA sintered at 1200 °C exhibited the highest hardness (5.08 GPa), compressive strength (255.79 MPa), and fracture toughness (1.21 MPa·m0.5). However, at 1400 °C, a slight decrease in apparent density (2.90 g/cm3) was noted due to the presence of α-TCP, along with significant grain growth. This study's objective is clearly aligned with the study design, incorporating detailed statistical analyses to validate the findings. Furthermore, bacterial culture experiments were conducted using sintered E-HA, Chem-HA (HA synthesized from reagent-grade calcium carbonate), and Comm-HA (commercial HA). Streptococcus mutans was cultured on the surfaces of sintered E-HA, Chem-HA, and Comm-HA samples for 20 h. After culturing, the OD values for all samples were below 0.2, indicating significant antibacterial efficacy. The comparable OD values and bacterial counts (p > 0.05) suggest that the source of HA does not impact its antibacterial properties. This underscores the potential of eggshell-derived HA as an effective material for biomedical applications.