Abstract:Background: Robotics is emerging as a promising tool for functional training of human movement. Much of the research in this area over the last decade has focused on upper extremity orthotic devices. Some recent commercial designs proposed for the lower extremity are powered and expensive - hence, these could have limited affordability by most clinics. In this paper, we present a novel un-motorized bilateral exoskeleton that can be used to assist in treadmill training of motor-impaired patients, such as with motor-incomplete spinal cord injury. The exoskeleton is designed such that the human leg will have a desirable swing motion, once it is strapped to the exoskeleton. Since this exoskeleton is un-motorized, it can potentially be produced cheaply and could reduce the physical demand on therapists during treadmill training. Results: A swing-assist bilateral exoskeleton was designed and fabricated at the University of Delaware having the following salient features: (i) The design uses torsional springs at the hip and the knee joints to assist the swing motion. The springs get charged by the treadmill during stance phase of the leg and provide propulsion forces to the leg during swing. (ii) The design of the exoskeleton uses simple dynamic models of sagittal plane walking, which are used to optimize the parameters of the springs so that the foot can clear the ground and have a desirable forward motion during walking. The bilateral exoskeleton was tested on a healthy subject during treadmill walking for a range of walking speeds between 1.0 mph and 4.0 mph. Joint encoders and interface force-torque sensors mounted on the exoskeleton were used to evaluate the effectiveness of the exoskeleton in terms of the hip and knee joint torques applied by the human during treadmill walking. Conclusion: We compared two different cases. In case 1, we estimated the torque applied by the human joints when walking with the device using the joint kinematic data and interface force-torque sensors. In case 2, we calculated the required torque to perform a similar gait only using the kinematic data collected from joint motion sensors. On analysis, we found that at 2.0 mph, the device was effective in reducing the maximum hip torque requirement and the knee joint torque during the beginning of the swing. These behaviors were retained as the treadmill speed was changed between 1-4 mph. These results were remarkable considering the simplicity of the dynamic model, model uncertainty, non-ideal spring behavior, and friction in the joints. We believe that the results can be further improved in the future. Nevertheless, this promises to provide a useful and effective methodology for design of un-motorized exoskeletons to assist and train swing of motor-impaired patients.

Gait Assistive Exoskeleton Device For Semi Paralyzed Stroke Survivors

Design, Control, and Pilot Study of a Lightweight and Modular Robotic Exoskeleton for Walking Assistance After Spinal Cord Injury

G-Exos: A wearable gait exoskeleton for walk assistance

Artificial Muscle Intelligence System With Deep Learning for Post-Stroke Assistance and Rehabilitation

Foot-wheel Driven Exoskeleton for Rehabilitation Training of Paraplegic Patients

Kinematics Mathematical Modelling of Lower Limb Exoskeleton for Paralyzed Stroke Patients

Novel swing-assist un-motorized exoskeletons for gait training

A Real-Time Stability Control Method Through sEMG Interface for Lower Extremity Rehabilitation Exoskeletons

Exoskeleton to Rehabilitate Paralyzed Arm Based on Patient Healthy Arm Guidance

Design of A Multi-Functional Soft Ankle Exoskeleton for Foot-Drop Prevention, Propulsion Assistance, and Inversion/Eversion Stabilization

The H2 robotic exoskeleton for gait rehabilitation after stroke: early findings from a clinical study

Conceptual design of a rehabilitation device based on cam-follower and crank-rocker mechanisms hand actioned

Hybrid FES-robot cooperative control of ambulatory gait rehabilitation exoskeleton

Robotic exoskeleton embodiment in post-stroke hemiparetic patients: an experimental study about the integration of the assistance provided by the REFLEX knee exoskeleton

Generation and control of adaptive gaits in lower-limb exoskeletons for motion assistance

Adapting to the Mechanical Properties and Active Force of an Exoskeleton by Altering Muscle Synergies in Chronic Stroke Survivors

Design of an SMA-Based Actuator for Replicating Normal Gait Patterns in Pediatric Patients with Cerebral Palsy

Electrically Driven Lower Limb Exoskeleton Rehabilitation Robot Based on Anthropomorphic Design

Biomechanical Effects of Robot Assisted Walking on Knee Joint Kinematics and Muscle Activation Pattern.

Robotic Restoration of Gait Function in Patients in the Early Recovery Period of Stroke

A Time Division Multiplexing Inspired Lightweight Soft Exoskeleton for Hip and Ankle Joint Assistance