Abstract:Background: Robotics is emerging as a promising tool for functional training of human movement. Much of the research in this area over the last decade has focused on upper extremity orthotic devices. Some recent commercial designs proposed for the lower extremity are powered and expensive - hence, these could have limited affordability by most clinics. In this paper, we present a novel un-motorized bilateral exoskeleton that can be used to assist in treadmill training of motor-impaired patients, such as with motor-incomplete spinal cord injury. The exoskeleton is designed such that the human leg will have a desirable swing motion, once it is strapped to the exoskeleton. Since this exoskeleton is un-motorized, it can potentially be produced cheaply and could reduce the physical demand on therapists during treadmill training. Results: A swing-assist bilateral exoskeleton was designed and fabricated at the University of Delaware having the following salient features: (i) The design uses torsional springs at the hip and the knee joints to assist the swing motion. The springs get charged by the treadmill during stance phase of the leg and provide propulsion forces to the leg during swing. (ii) The design of the exoskeleton uses simple dynamic models of sagittal plane walking, which are used to optimize the parameters of the springs so that the foot can clear the ground and have a desirable forward motion during walking. The bilateral exoskeleton was tested on a healthy subject during treadmill walking for a range of walking speeds between 1.0 mph and 4.0 mph. Joint encoders and interface force-torque sensors mounted on the exoskeleton were used to evaluate the effectiveness of the exoskeleton in terms of the hip and knee joint torques applied by the human during treadmill walking. Conclusion: We compared two different cases. In case 1, we estimated the torque applied by the human joints when walking with the device using the joint kinematic data and interface force-torque sensors. In case 2, we calculated the required torque to perform a similar gait only using the kinematic data collected from joint motion sensors. On analysis, we found that at 2.0 mph, the device was effective in reducing the maximum hip torque requirement and the knee joint torque during the beginning of the swing. These behaviors were retained as the treadmill speed was changed between 1-4 mph. These results were remarkable considering the simplicity of the dynamic model, model uncertainty, non-ideal spring behavior, and friction in the joints. We believe that the results can be further improved in the future. Nevertheless, this promises to provide a useful and effective methodology for design of un-motorized exoskeletons to assist and train swing of motor-impaired patients.

Generation and control of adaptive gaits in lower-limb exoskeletons for motion assistance

Adaptive CPG-Based Impedance Control for Assistive Lower Limb Exoskeleton

Gait-Generation Strategy for Lower Limb Exoskeleton Based on Central Pattern Generator

Design and Gait Realization of Power-assisted Lower Limbs Exoskeleton

Design of an SMA-Based Actuator for Replicating Normal Gait Patterns in Pediatric Patients with Cerebral Palsy

Adaptive CPG-Based Gait Planning With Learning-Based Torque Estimation and Control for Exoskeletons

Novel swing-assist un-motorized exoskeletons for gait training

Lower limb exoskeleton for gait rehabilitation with adaptive nonsingular sliding mode control

Conceptual design of a rehabilitation device based on cam-follower and crank-rocker mechanisms hand actioned

Design and Control of a Soft Knee Exoskeleton for Pediatric Patients at Early Stages of the Walking Learning Process

Design, Control, and Pilot Study of a Lightweight and Modular Robotic Exoskeleton for Walking Assistance After Spinal Cord Injury

Design and Gait Control of an Active Lower Limb Exoskeleton for Walking Assistance

Optimally Biomimetic Passivity-Based Control of a Lower-Limb Exoskeleton Over the Primary Activities of Daily Life

Design and analysis of a novel 12-DOF self-balancing lower extremity exoskeleton for walking assistance

Proportional Joint-Moment Control for Instantaneously Adaptive Ankle Exoskeleton Assistance

Closed-Loop Torque and Kinematic Control of a Hybrid Lower-Limb Exoskeleton for Treadmill Walking

Mitigating Crouch Gait with an Autonomous Pediatric Knee Exoskeleton in the Neurologically Impaired

Electrically Driven Lower Limb Exoskeleton Rehabilitation Robot Based on Anthropomorphic Design

Development and control of a robotic lower limb exoskeleton for paraplegic patients

Deep-Learning Control of Lower-Limb Exoskeletons via simplified Therapist Input

Synergetic gait prediction and compliant control of SEA-driven knee exoskeleton for gait rehabilitation