Major lower extremity amputations at a Veterans Affairs hospital.

C. Cruz,J. Eidt,C. Capps,Leah Kirtley,M. Moursi

DOI: https://doi.org/10.1016/J.AMJSURG.2003.07.027

2003-11-01

Abstract:

What problem does this paper attempt to address?

Cooperative Control for A Hybrid Rehabilitation System Combining Functional Electrical Stimulation and Robotic Exoskeleton

Dingguo Zhang,Yong Ren,Kai Gui,Jie Jia,Wendong Xu

DOI: https://doi.org/10.3389/fnins.2017.00725

IF: 4.3

2017-01-01

Frontiers in Neuroscience

Abstract:Functional electrical stimulation (FES) and robotic exoskeletons are two important technologies widely used for physical rehabilitation of paraplegic patients. We developed a hybrid rehabilitation system (FEXO Knee) that combined FES and an exoskeleton for swinging movement control of human knee joints. This study proposed a novel cooperative control strategy, which could realize arbitrary distribution of torque generated by FES and exoskeleton, and guarantee harmonic movements. The cooperative control adopted feedfoward control for FES and feedback control for exoskeleton. A parameter regulator was designed to update key parameters in real time to coordinate FES controller and exoskeleton controller. Two muscle groups (quadriceps and hamstrings) were stimulated to generate active torque for knee joint in synchronization with torque compensation from exoskeleton. The knee joint angle and the interactive torque between exoskeleton and shank were used as feedback signals for the control system. Central pattern generator (CPG) was adopted that acted as a phase predictor to deal with phase confliction of motor patterns, and realized synchronization between the two different bodies (shank and exoskeleton). Experimental evaluation of the hybrid FES-exoskeleton system was conducted on five healthy subjects and four paraplegic patients. Experimental results and statistical analysis showed good control performance of the cooperative control on torque distribution, trajectory tracking, and phase synchronization.
Hybrid Cooperative Control of Functional Electrical Stimulation and Robot Assistance for Upper Extremity Rehabilitation

S Dalla Gasperina,F Ferrari,M Gandolla,A Pedrocchi,E Ambrosini

DOI: https://doi.org/10.1109/TBME.2024.3384939

Abstract:Objective: Hybrid systems that integrate Functional Electrical Stimulation (FES) and robotic assistance have been proposed in neurorehabilitation to enhance therapeutic benefits. This study focuses on designing a cooperative controller capable of distributing the required torque for movement between robotic actuation and FES, thereby eliminating the need for time-consuming calibration procedures. Methods: The control schema comprises three main blocks: a motion generation block that defines the desired trajectory, a motor control block including both a weight compensation feedforward and a feedback impedance controller, and an FES control block, based on trial-by-trial Iterative Learning Control (ILC), that adjusts the stimulation intensity according to a predefined stimulation waveform. The feedforward motor assistance can be dynamically regulated using an allocation factor. Experiments involving 12 healthy volunteers were conducted using a one-degree-of-freedom elbow testbed. Results: The experimental results showcased the successful integration of Functional Electrical Stimulation (FES) with robotic actuation, ensuring precise trajectory tracking with a Root Mean Square Error (RMSE) below 7°. Notably, allocating more torque to FES led to a 51 % reduction in motor torque. In conditions where FES operated alone, there was poorer tracking performance with an RMSE of 24° and an early onset of muscle fatigue, as evidenced by a reduced number of achieved repetitions. Furthermore, the hybrid approach enabled 100 fatigue-free elbow flexion repetitions, underscoring the effectiveness of cooperative FES-motor control in extending the benefits of FES-induced exercises. Significance: This study proposes a flexible approach which can be extended to a multi-degree-of-freedom hybrid system. Furthermore, it underscores the significance of employing a straightforward and adaptable methodology with a rapid calibration procedure, making it easily transferable to clinical applications.
Closed-Loop FES Control of a Hybrid Exoskeleton during Sit-to-Stand Exercises: Concept and First Evaluation

Chenglin Lyu,Pedro Truppel Morim,Bernhard Penzlin,Felix Röhren,Lukas Bergmann,Philip von Platen,Cornelius Bollheimer,Steffen Leonhardt,Chuong Ngo

DOI: https://doi.org/10.3390/act12080316

IF: 2.6

2023-08-06

Actuators

Abstract:Rehabilitation of paralysis caused by a stroke or a spinal cord injury remains a complex and time-consuming task. This work proposes a hybrid exoskeleton approach combining a traditional exoskeleton and functional electrical stimulation (FES) as a promising method in rehabilitation. However, hybrid exoskeletons with a closed-loop FES control strategy are functionally challenging to achieve and have not been reported often. Therefore, this study aimed to investigate a powered lower-limb exoskeleton with a closed-loop FES control for Sit-to-Stand (STS) movements. A body motion capture system was applied to record precise hip and knee trajectories of references for establishing the human model. A closed-loop control strategy with allocation factors is proposed featuring a two-layer cascaded proportional–integral–derivative (PID) controller for both FES and exoskeleton control. Experiments were performed on two participants to examine the feasibility of the hybrid exoskeleton and the closed-loop FES control. Both open- and closed-loop FES control showed the desired performance with a relatively low root-mean-squared error (max 1.3∘ in open-loop and max 4.1∘ in closed-loop) in hip and knee trajectories. Notably, the closed-loop FES control strategy can achieve the same performance with nearly 60% of the electrical power input compared to the open-loop control, which reduced muscle fatigue and improved robustness during the training. This study provides novel insights into body motion capture application and proposes a closed-loop FES control for hybrid exoskeletons.

engineering, mechanical,instruments & instrumentation
Model-Based Shared Control of a Hybrid FES-Exoskeleton: An Application in Participant-Specific Robotic Rehabilitation

Hossein Kavianirad,Moein Forouhar,Hamid Sadeghian,Satoshi Endo,Sami Haddadin,Sandra Hirche

DOI: https://doi.org/10.1109/ICORR58425.2023.10304764

Abstract:Hybrid exoskeleton, comprising an exoskeleton interfaced with functional electrical stimulation (FES) technique, is conceptualized to complement the weakness of each other in automated neuro-rehabilitation of sensory-motor deficits. The externally actuating exoskeleton cannot directly influence neurophysiology of the patients, while FES is difficult to use in functional or goal-oriented tasks. The latter challenge is largely inherited from the fact that the dynamics of the muscular response to FES is complex, and it is highly user- and state-dependent. Due to the retardation of the muscular contraction response to the FES profile, furthermore, a commonly used model-free control scheme, such as PID control, suffers performance. The challenge in FES control is exacerbated especially in the presence of the actuation redundancy between the volitional activity of the user, powered exoskeleton, and FES-induced muscle contractions. This study therefore presents trajectory tracking performance of the hybrid exoskeleton in a novel model-based hybrid exoskeleton scheme which entices user-specific FES model-predictive control.
Adaptive Control for Triadic Human-Robot-FES Collaboration in Gait Rehabilitation: A Pilot Study

Andreas Christou,Antonio J. del-Ama,Juan C. Moreno,Sethu Vijayakumar

2024-03-08

Abstract:The hybridisation of robot-assisted gait training and functional electrical stimulation (FES) can provide numerous physiological benefits to neurological patients. However, the design of an effective hybrid controller poses significant challenges. In this over-actuated system, it is extremely difficult to find the right balance between robotic assistance and FES that will provide personalised assistance, prevent muscle fatigue and encourage the patient's active participation in order to accelerate recovery. In this paper, we present an adaptive hybrid robot-FES controller to do this and enable the triadic collaboration between the patient, the robot and FES. A patient-driven controller is designed where the voluntary movement of the patient is prioritised and assistance is provided using FES and the robot in a hierarchical order depending on the patient's performance and their muscles' fitness. The performance of this hybrid adaptive controller is tested in simulation and on one healthy subject. Our results indicate an increase in tracking performance with lower overall assistance, and less muscle fatigue when the hybrid adaptive controller is used, compared to its non adaptive equivalent. This suggests that our hybrid adaptive controller may be able to adapt to the behaviour of the user to provide assistance as needed and prevent the early termination of physical therapy due to muscle fatigue.

Robotics
Closed-Loop Torque and Kinematic Control of a Hybrid Lower-Limb Exoskeleton for Treadmill Walking

Chen-Hao Chang,Jonathan Casas,Steven W. Brose,Victor H. Duenas

DOI: https://doi.org/10.3389/frobt.2021.702860

2022-01-20

Frontiers in Robotics and AI

Abstract:Restoring and improving the ability to walk is a top priority for individuals with movement impairments due to neurological injuries. Powered exoskeletons coupled with functional electrical stimulation (FES), called hybrid exoskeletons, exploit the benefits of activating muscles and robotic assistance for locomotion. In this paper, a cable-driven lower-limb exoskeleton is integrated with FES for treadmill walking at a constant speed. A nonlinear robust controller is used to activate the quadriceps and hamstrings muscle groups via FES to achieve kinematic tracking about the knee joint. Moreover, electric motors adjust the knee joint stiffness throughout the gait cycle using an integral torque feedback controller. For the hip joint, a robust sliding-mode controller is developed to achieve kinematic tracking using electric motors. The human-exoskeleton dynamic model is derived using Lagrangian dynamics and incorporates phase-dependent switching to capture the effects of transitioning from the stance to the swing phase, and vice versa. Moreover, low-level control input switching is used to activate individual muscles and motors to achieve flexion and extension about the hip and knee joints. A Lyapunov-based stability analysis is developed to ensure exponential tracking of the kinematic and torque closed-loop error systems, while guaranteeing that the control input signals remain bounded. The developed controllers were tested in real-time walking experiments on a treadmill in three able-bodied individuals at two gait speeds. The experimental results demonstrate the feasibility of coupling a cable-driven exoskeleton with FES for treadmill walking using a switching-based control strategy and exploiting both kinematic and force feedback.
An Iterative Learning Controller for a Switched Cooperative Allocation Strategy During Sit-to-Stand Tasks with a Hybrid Exoskeleton

Vahidreza Molazadeh,Qiang Zhang,Xuefeng Bao,Nitin Sharma

DOI: https://doi.org/10.1109/tcst.2021.3089885

IF: 4.8

2022-05-01

IEEE Transactions on Control Systems Technology

Abstract:A hybrid exoskeleton that combines functional electrical stimulation (FES) and a powered exoskeleton is an emerging technology for assisting people with mobility disorders. The cooperative use of FES and the exoskeleton allows active muscle contractions through FES while robustifying torque generation to reduce FES-induced muscle fatigue. In this article, a switched distribution of allocation ratios between FES and electric motors in a closed-loop adaptive control design is explored for the first time. The new controller uses an iterative learning neural network (NN)-based control law to compensate for structured and unstructured parametric uncertainties in the hybrid exoskeleton model. A discrete Lyapunov-like stability analysis that uses a common energy function proves asymptotic stability for the switched system with iterative learning update laws. Five human participants, including a person with complete spinal cord injury, performed sit-to-stand tasks with the new controller. The experimental results showed that the synthesized controller, in a few iterations, reduced the root mean square error between desired positions and actual positions of the knee and hip joints by 46.20% and 53.34%, respectively. The sit-to-stand experimental results also show that the proposed NN-based iterative learning control (NNILC) approach can recover the asymptotically trajectory tracking performance despite the switching of allocation levels between FES and electric motor. Compared to a proportional-derivative controller and traditional iterative learning control, the findings showed that the new controller can potentially simplify the clinical implementation of the hybrid exoskeleton with minimal parameters tuning.

automation & control systems,engineering, electrical & electronic
Model-Based Dynamic Control Allocation in a Hybrid Neuroprosthesis

Nicholas A. Kirsch,Xuefeng Bao,Naji A. Alibeji,Brad E. Dicianno,Nitin Sharma

DOI: https://doi.org/10.1109/tnsre.2017.2756023

IF: 4.9

2018-01-01

IEEE Transactions on Neural Systems and Rehabilitation Engineering

Abstract:A hybrid neuroprosthesis that combines human muscle power, elicited through functional electrical stimulation (FES), with a powered orthosis may be advantageous over a sole FES or a powered exoskeleton-based rehabilitation system. The hybrid system can conceivably overcome torque reduction due to FES-induced muscle fatigue by complementarily using torque from the powered exoskeleton. The second advantage of the hybrid system is that the use of human muscle power can supplement the powered exoskeleton's power (motor torque) requirements; thus, potentially reducing the size and weight of a walking restoration system. To realize these advantages, however, it is unknown how to concurrently optimize desired control performance and allocation of control inputs between FES and electric motor. In this paper, a model predictive control-based dynamic control allocation (DCA) is used to allocate control between FES and the electric motor that simultaneously maintain a desired knee angle. The experimental results, depicting the performance of the DCA method while the muscle fatigues, are presented for an able-bodied participant and a participant with spinal cord injury. The experimental results showed that the motor torque recruited by the hybrid system was less than that recruited by the motor-only system, the algorithm can be easily used to allocate more control input to the electric motor as the muscle fatigues, and the muscle fatigue induced by the hybrid system was found to be less than the fatigue induced by sole FES. These results validate the aforementioned advantages of the hybrid system; thus implying the hybrid technology's potential use in walking rehabilitation.

engineering, biomedical,rehabilitation
Real-Time Ultrasound Imaging of a Human Muscle to Optimize Shared Control in a Hybrid Exoskeleton

Ashwin Iyer,Ziyue Sun,Krysten Lambeth,Mayank Singh,Christine Cleveland,Nitin Sharma

DOI: https://doi.org/10.1109/tro.2024.3443668

IF: 7.8

2024-10-04

IEEE Transactions on Robotics

Abstract:A hybrid exoskeleton is a class of wearable robotic technology that simultaneously uses a powered exoskeleton and functional electrical stimulation (FES) to generate assistive joint torques for people with impaired mobility due to neurological disorders such as spinal cord injury (SCI). The hybrid assistive technology benefits from FES that actively elicits force from paralyzed muscles via their neural excitation, leading to muscle strengthening. The main technical barrier to realizing the hybrid technology is to attain stable coordination between FES and the exoskeleton despite the quick onset of FES-induced muscle fatigue, which causes a rapid decline in the muscle force. Current methods to measure the induced fatigue lack direct muscle state measurements and may be ineffective at capturing the muscle force decay due to FES. Instead, ultrasound (US) imaging accurately quantifies FES-related muscle contractility and fatigue due to the direct visualization of muscle fibers. In this article, we use real-time US imaging-derived muscle strain changes as biomarkers of FES-induced fatigue in an optimal controller that modulates exoskeleton assistance and FES dosage. To demonstrate that real-time US imaging is a promising muscle–machine interface technology that can optimize shared control in a hybrid exoskeleton, we perform experiments involving continuous seated knee extension and over-ground walking tasks on two participants with SCI and four participants without disabilities. Furthermore, this work helps design a novel and unprecedented robotic gait technology with the capability to impart FES-associated therapeutic benefits while assisting the gait of neurologically impaired individuals, including those with SCI, stroke, multiple sclerosis, etc.

robotics
Machine-learning-based coordination of powered ankle–foot orthosis and functional electrical stimulation for gait control

Suhun Jung,Jae Hwan Bong,Keri Kim,Shinsuk Park

DOI: https://doi.org/10.3389/fbioe.2023.1272693

IF: 5.7

2024-01-11

Frontiers in Bioengineering and Biotechnology

Abstract:This study proposes a novel gait rehabilitation method that uses a hybrid system comprising a powered ankle–foot orthosis (PAFO) and FES, and presents its coordination control. The developed system provides assistance to the ankle joint in accordance with the degree of volitional participation of patients with post-stroke hemiplegia. The PAFO adopts the desired joint angle and impedance profile obtained from biomechanical simulation. The FES patterns of the tibialis anterior and soleus muscles are derived from predetermined electromyogram patterns of healthy individuals during gait and personalized stimulation parameters. The CNN-based estimation model predicts the volitional joint torque from the electromyogram of the patient, which is used to coordinate the contributions of the PAFO and FES. The effectiveness of the developed hybrid system was tested on healthy individuals during treadmill walking with and without considering the volitional muscle activity of the individual. The results showed that consideration of the volitional muscle activity significantly lowers the energy consumption by the PAFO and FES while providing adaptively assisted ankle motion depending on the volitional muscle activities of the individual. The proposed system has potential use as an assist-as-needed rehabilitation system, where it can improve the outcome of gait rehabilitation by inducing active patient participation depending on the stage of rehabilitation.

multidisciplinary sciences
Development of a Gait Rehabilitation Robot Using an Exoskeleton and Functional Electrical Stimulation: Validation in a Pseudo-paraplegic Model

Junichi Inoue,Ryota Kimura,Yoichi Shimada,Kimio Saito,Daisuke Kudo,Kazutoshi Hatakeyama,Motoyuki Watanabe,Kai Maeda,Takehiro Iwami,Toshiki Matsunaga,Naohisa Miyakoshi

DOI: https://doi.org/10.2490/prm.20220001

2022-01-01

Progress in Rehabilitation Medicine

Abstract:OBJECTIVE: We have developed a robot for gait rehabilitation of paraplegics for use in combination with functional electrical stimulation (FES). The purpose of this study was to verify whether the robot-derived torque can be reduced by using FES in a healthy-person pseudo-paraplegic model.METHODS: Nine healthy participants (22-36 years old) participated in this study. The robot exoskeleton was designed based on the hip-knee-ankle-foot orthosis for paraplegia. Participants walked on a treadmill using a rehabilitation lift to support their weight. The bilateral quadriceps femoris and hamstrings were stimulated using FES. The participants walked both with and without FES, and two walking speeds, 0.8 and 1.2 km/h, were used. Participants walked for 1 min in each of the four conditions: (a) 0.8 km/h without FES, (b) 0.8 km/h with FES, (c) 1.2 km/h without FES, and (d) 1.2 km/h with FES. The required robot torques in these conditions were compared for each hip and knee joint. The maximum torque was compared using one-way analysis of variance to determine whether there was a difference in the amount of assist torque for each gait cycle.RESULTS: Walking with the exoskeleton robot in combination with FES significantly reduced the torque in hip and knee joints, except for the right hip during extension.CONCLUSIONS: In the healthy-participant pseudo-paraplegic model, walking with FES showed a reduction in the robot-derived torque at both the hip and knee joints. Our rehabilitation robot combined with FES has the potential to assist paraplegics with various degrees of muscle weakness and thereby provide effective rehabilitation.
Iterative learning control applied to a hybrid rehabilitation exoskeleton system powered by PAM and FES

Xikai Tu,Xuan Zhou,Jiaxin Li,Chen Su,Xiaotong Sun,Hualin Han,Xiaobo Jiang,Jiping He

DOI: https://doi.org/10.1007/s10586-017-0880-x

2017-05-22

Cluster Computing

Abstract:Currently upper limb exoskeleton rehabilitation robots powered by electric motors used in the hospitals are usually cumbersome, bulky and unmovable. Our developed RUPERT is a low-cost lightweight portable exoskeleton rehabilitation robot that can encourage stroke patients with high stiffness in arm flexor muscles to receive frequent intensive rehabilitation trainings in the community or home, but its joints are unidirectionally actuated by pneumatic artificial muscles (PAMs). RUPERT with one PAM of each joint is not suitable for stroke patients with weak muscles in the flaccid paralysis period. Functional electrical stimulation (FES) uses current with low frequency to activate paralyzed muscles, which can produce muscle torque and compensate the unidirectional drawbacks of RUPERT, so as to realize the two-way motion of its joints for passive reaching trainings. As both the exoskeleton robot driven by PAMs and neuromuscular skeletal system under FES possess the highly nonlinear and time-varying characteristics, which adds control difficulty to the hybrid dynamic system, iterative learning control (ILC) is chosen to control this newly designed hybrid rehabilitation system to realize repetitive task trainings.

English Else
An adaptive reflexive control strategy for walking assistance system based on functional electrical stimulation

Hongtao Dong,Jie Hou,Zhaoxi Song,Rui Xu,Lin Meng,Dong Ming

DOI: https://doi.org/10.3389/fnins.2022.944291

IF: 4.3

2022-08-25

Frontiers in Neuroscience

Abstract:Functional electrical stimulation (FES) neuroprostheses have been regarded as an effective approach for gait rehabilitation and assisting patients with stroke or spinal cord injuries. A multiple-channel FES system was developed to improve the assistance and restoration of lower limbs. However, most neuroprostheses need to be manually adjusted and cannot adapt to individual needs. This study aimed to integrate the purely reflexive FES controller with an iterative learning algorithm while a multiple-channel FES walking assistance system based on an adaptive reflexive control strategy has been established. A real-time gait phase detection system was developed for accurate gait phase detection and stimulation feedback. The reflexive controller generated stimulation sequences induced by the gait events. These stimulation sequences were updated for the next gait cycle through the difference between the current and previous five gait cycles. Ten healthy young adults were enrolled to validate the multiple-channel FES system by comparing participants' gait performance to those with no FES controller and purely reflexive controller. The results showed that the proposed adaptive FES controller enabled the adaption to generate fitted stimulation sequences for each participant during various treadmill walking speeds. The maximum, minimum, and range of motion (ROM) of the hip, knee, and ankle joints were furtherly improved for most participants, especially for the hip and knee flexion and ankle dorsiflexion compared with the purely reflexive FES control strategy. The presented system has the potential to enhance motor relearning and promote neural plasticity.

neurosciences
An investigation of the factors affecting handwriting performance in children with hemiplegic cerebral palsy

G. Bumin,S. Kavak

DOI: https://doi.org/10.1080/09638280701673609

2008-01-01

Disability and Rehabilitation

Abstract:Purpose. This study investigated the effects of sensory – perceptual – motor and cognitive functions on handwriting performance in primary-school children with left-hemiplegic cerebral palsy, compared with that of their healthy peers. Methods. The study included 26 children aged 8 – 12 years with left-hemiplegic cerebral palsy and 32 typically developing children of similar age with dominant right hand. The Minnesota Handwriting Assessment was used to evaluate handwriting ability. The Bruininks – Oseretsky Test of Motor Proficiency was used to assess motor performance. Cognitive function was assessed by the Loewenstein Occupational Therapy Cognitive Assessment. The Ayres Southern California Sensory Integration Tests were used to assess visual perception, kinaesthesia, and graphesthesia. Results. Statistically significant differences were found between the two groups in sensory-perceptual-motor and cognitive function and in handwriting ability (p < 0.05). There were also significant correlations between handwriting parameters and upper-extremity speed and dexterity, proprioception, bilateral coordination, visual and spatial perception and, visual-motor organisation in children with cerebral palsy (p < 0.05). Conclusions. The results showed that left-hemiplegic children with cerebral palsy whose right sides were dominant were significantly less competent at handwriting than their right-dominant, healthy peers. It was found that the impairment in proprioception seen in the non-hemiplegic side in children with cerebral palsy, and also the impairment in bilateral coordination, speed and dexterity of the upper extremities, visual and spatial perception, visual-motor organization, and tactile-sensory impairments negatively affected their handwriting skills. In the treatment approaches for children with hemiplegic cerebral palsy, comprehensive sensory – perceptual – motor assessments that involve both extremities must be performed in detail at the earliest possible stage, in order to minimize the existing problems with early-treatment policies. Developing the sensory – perceptual – motor and cognitive function of hemiplegic children would thus be possible, and they would be able to adapt to the same primary-school curriculum as their healthy peers.
Design, Control, and Pilot Study of a Lightweight and Modular Robotic Exoskeleton for Walking Assistance After Spinal Cord Injury

Josep M. Font-Llagunes,Urbano Lugris,Daniel Clos,F.J. Alonso,Javier Cuadrado,Urbano Lugrís,F. Javier Alonso

DOI: https://doi.org/10.1115/1.4045510

2020-01-13

Journal of Mechanisms and Robotics

Abstract:Abstract Walking rehabilitation using exoskeletons is of high importance to maximize independence and improve the general well-being of spinal cord injured subjects. We present the design and control of a lightweight and modular robotic exoskeleton to assist walking in spinal cord injured subjects who can control hip flexion, but lack control of knee and ankle muscles. The developed prototype consists of two robotic orthoses, which are powered by a motor-harmonic drive actuation system that controls knee flexion–extension. This actuation module is assembled on standard passive orthoses. Regarding the control, the stance-to-swing transition is detected using two inertial measurement units mounted on the tibial supports, and then the corresponding motor performs a predefined flexion–extension cycle that is personalized to the specific patient’s motor function. The system is portable by means of a backpack that contains an embedded computer board, the motor drivers, and the battery. A preliminary biomechanical evaluation of the gait-assistive device used by a female patient with incomplete spinal cord injury at T11 is presented. Results show an increase of gait speed (+24.11%), stride length (+7.41%), and cadence (+15.56%) when wearing the robotic orthoses compared with the case with passive orthoses. Conversely, a decrease of lateral displacement of the center of mass (−19.31%) and step width (−13.37% right step, −8.81% left step) are also observed, indicating gain of balance. The biomechanical assessment also reports an overall increase of gait symmetry when wearing the developed assistive device.

robotics,engineering, mechanical
Volition-adaptive control for gait training using wearable exoskeleton: preliminary tests with incomplete spinal cord injury individuals

Vijaykumar Rajasekaran,Eduardo López-Larraz,Fernando Trincado-Alonso,Joan Aranda,Luis Montesano,Antonio J. del-Ama,Jose L. Pons

DOI: https://doi.org/10.1186/s12984-017-0345-8

2018-01-03

Journal of NeuroEngineering and Rehabilitation

Abstract:BackgroundGait training for individuals with neurological disorders is challenging in providing the suitable assistance and more adaptive behaviour towards user needs. The user specific adaptation can be defined based on the user interaction with the orthosis and by monitoring the user intentions. In this paper, an adaptive control model, commanded by the user intention, is evaluated using a lower limb exoskeleton with incomplete spinal cord injury individuals (SCI).MethodsA user intention based adaptive control model has been developed and evaluated with 4 incomplete SCI individuals across 3 sessions of training per individual. The adaptive control model modifies the joint impedance properties of the exoskeleton as a function of the human-orthosis interaction torques and the joint trajectory evolution along the gait sequence, in real time. The volitional input of the user is identified by monitoring the neural signals, pertaining to the user’s motor activity. These volitional inputs are used as a trigger to initiate the gait movement, allowing the user to control the initialization of the exoskeleton movement, independently. A Finite-state machine based control model is used in this set-up which helps in combining the volitional orders with the gait adaptation.ResultsThe exoskeleton demonstrated an adaptive assistance depending on the patients’ performance without guiding them to follow an imposed trajectory. The exoskeleton initiated the trajectory based on the user intention command received from the brain machine interface, demonstrating it as a reliable trigger. The exoskeleton maintained the equilibrium by providing suitable assistance throughout the experiments. A progressive change in the maximum flexion of the knee joint was observed at the end of each session which shows improvement in the patient performance. Results of the adaptive impedance were evaluated by comparing with the application of a constant impedance value. Participants reported that the movement of the exoskeleton was flexible and the walking patterns were similar to their own distinct patterns.ConclusionsThis study demonstrates that user specific adaptive control can be applied on a wearable robot based on the human-orthosis interaction torques and modifying the joints’ impedance properties. The patients perceived no external or impulsive force and felt comfortable with the assistance provided by the exoskeleton. The main goal of such a user dependent control is to assist the patients’ needs and adapt to their characteristics, thus maximizing their engagement in the therapy and avoiding slacking. In addition, the initiation directly controlled by the brain allows synchronizing the user’s intention with the afferent stimulus provided by the movement of the exoskeleton, which maximizes the potentiality of the system in neuro-rehabilitative therapies.

engineering, biomedical,rehabilitation,neurosciences
A Tube-Based Model Predictive Control Method to Regulate a Knee Joint With Functional Electrical Stimulation and Electric Motor Assist

Xuefeng Bao,Zhiyu Sheng,Brad E. Dicianno,Nitin Sharma

DOI: https://doi.org/10.1109/tcst.2020.3034850

IF: 4.8

2021-09-01

IEEE Transactions on Control Systems Technology

Abstract:A hybrid neuroprosthesis system is a promising rehabilitation technology to restore lower limb function in persons with paraplegia. The technology combines functional electrical stimulation (FES) and a powered lower limb exoskeleton to produce movements for walking and standing. The main control challenge in the hybrid neuroprosthesis is to achieve an optimal coordination between FES and electric motors. Model-based optimal control methods have been suggested for the control of the hybrid neuroprosthesis. However, it is often difficult to effect robust control performance with model-based optimal control methods due to modeling uncertainties. A tube-based model predictive control (MPC) method is developed to obtain robust and optimal coordination between FES and an electric motor during a knee regulation task. An external feedback control is used to limit the error between the actual position and the MPC-computed nominal position. The tube-based MPC method is proved to have recursive feasibility, compliance to input constraints, and exponentially bounded stability. The experimental results obtained from an able-bodied participant and a participant with spinal cord injury validate the controller's ability to allocate control inputs to FES and the electric motor as well as method's robustness to modeling uncertainties.

automation & control systems,engineering, electrical & electronic
A Hybrid Knee Exoskeleton Using Real-Time Ultrasound-Based Muscle Fatigue Assessment

Zhiyu Sheng,Ashwin Iyer,Ziyue Sun,Kang Kim,Nitin Sharma

DOI: https://doi.org/10.1109/tmech.2022.3171086

2022-09-03

IEEE/ASME Transactions on Mechatronics

Abstract:Ultrasound-based state assessment of the human muscle during rehabilitation and its integration into a hybrid exoskeleton comprising an functional electrical stimulation (FES) system and a powered orthosis are emerging research areas. This article presents results from the first experimental demonstration of a hybrid knee exoskeleton that uses ultrasound-derived muscle state feedback to coordinate electrical motors and FES. A significant contribution of the article is to integrate a real-time ultrasound image acquisition and processing framework into a recently derived switching-based feedback control of the hybrid knee exoskeleton. As a result, the contractility response of the quadriceps muscle to the FES input can be monitored in vivo in real-time and estimate FES-induced muscle fatigue changes in the muscle. The switched controller's decision-making process can then use the estimated muscle fatigue to compensate or replace the FES-stimulated muscle power with an electrical motor, thus avoiding extensive stimulation of the fatigued muscle. The experimental results suggest a potential application in the rehabilitation of neurological disorders like spinal cord injuries and stroke.
Real-Time Closed-Loop Functional Electrical Stimulation Control of Muscle Activation with Evoked Electromyography Feedback for Spinal Cord Injured Patients

Zhan Li,David Guiraud,David Andreu,Anthony Gelis,Charles Fattal,Mitsuhiro Hayashibe

DOI: https://doi.org/10.1142/S0129065717500630

Abstract:Functional electrical stimulation (FES) is a neuroprosthetic technique to help restore motor function of spinal cord-injured (SCI) patients. Through delivery of electrical pulses to muscles of motor-impaired subjects, FES is able to artificially induce their muscle contractions. Evoked electromyography (eEMG) is used to record such FES-induced electrical muscle activity and presents a form of [Formula: see text]-wave. In order to monitor electrical muscle activity under stimulation and ensure safe stimulation configurations, closed-loop FES control with eEMG feedback is needed to be developed for SCI patients who lose their voluntary muscle contraction ability. This work proposes a closed-loop FES system for real-time control of muscle activation on the triceps surae and tibialis muscle groups through online modulating pulse width (PW) of electrical stimulus. Subject-specific time-variant muscle responses under FES are explicitly reflected by muscle excitation model, which is described by Hammerstein system with its input and output being, respectively, PW and eEMG. Model predictive control is adopted to compute the PW based on muscle excitation model which can online update its parameters. Four muscle activation patterns are provided as desired control references to validate the proposed closed-loop FES control paradigm. Real-time experimental results on three able-bodied subjects and five SCI patients in clinical environment show promising performances of tracking the aforementioned reference muscle activation patterns based on the proposed closed-loop FES control scheme.
Classical and adaptive control of ex vivo skeletal muscle contractions using Functional Electrical Stimulation (FES)

Paola Jaramillo Cienfuegos,Adam Shoemaker,Robert W. Grange,Nicole Abaid,Alexander Leonessa

DOI: https://doi.org/10.1371/journal.pone.0172761

IF: 3.7

2017-03-08

PLoS ONE

Abstract:Functional Electrical Stimulation is a promising approach to treat patients by stimulating the peripheral nerves and their corresponding motor neurons using electrical current. This technique helps maintain muscle mass and promote blood flow in the absence of a functioning nervous system. The goal of this work is to control muscle contractions from FES via three different algorithms and assess the most appropriate controller providing effective stimulation of the muscle. An open-loop system and a closed-loop system with three types of model-free feedback controllers were assessed for tracking control of skeletal muscle contractions: a Proportional-Integral (PI) controller, a Model Reference Adaptive Control algorithm, and an Adaptive Augmented PI system. Furthermore, a mathematical model of a muscle-mass-spring system was implemented in simulation to test the open-loop case and closed-loop controllers. These simulations were carried out and then validated through experiments ex vivo. The experiments included muscle contractions following four distinct trajectories: a step, sine, ramp, and square wave. Overall, the closed-loop controllers followed the stimulation trajectories set for all the simulated and tested muscles. When comparing the experimental outcomes of each controller, we concluded that the Adaptive Augmented PI algorithm provided the best closed-loop performance for speed of convergence and disturbance rejection.

multidisciplinary sciences

Major lower extremity amputations at a Veterans Affairs hospital.

Cooperative Control for A Hybrid Rehabilitation System Combining Functional Electrical Stimulation and Robotic Exoskeleton

Hybrid Cooperative Control of Functional Electrical Stimulation and Robot Assistance for Upper Extremity Rehabilitation

Closed-Loop FES Control of a Hybrid Exoskeleton during Sit-to-Stand Exercises: Concept and First Evaluation

Model-Based Shared Control of a Hybrid FES-Exoskeleton: An Application in Participant-Specific Robotic Rehabilitation

Adaptive Control for Triadic Human-Robot-FES Collaboration in Gait Rehabilitation: A Pilot Study

Closed-Loop Torque and Kinematic Control of a Hybrid Lower-Limb Exoskeleton for Treadmill Walking

An Iterative Learning Controller for a Switched Cooperative Allocation Strategy During Sit-to-Stand Tasks with a Hybrid Exoskeleton

Model-Based Dynamic Control Allocation in a Hybrid Neuroprosthesis

Real-Time Ultrasound Imaging of a Human Muscle to Optimize Shared Control in a Hybrid Exoskeleton

Machine-learning-based coordination of powered ankle–foot orthosis and functional electrical stimulation for gait control

Development of a Gait Rehabilitation Robot Using an Exoskeleton and Functional Electrical Stimulation: Validation in a Pseudo-paraplegic Model

Iterative learning control applied to a hybrid rehabilitation exoskeleton system powered by PAM and FES

An adaptive reflexive control strategy for walking assistance system based on functional electrical stimulation

An investigation of the factors affecting handwriting performance in children with hemiplegic cerebral palsy

Design, Control, and Pilot Study of a Lightweight and Modular Robotic Exoskeleton for Walking Assistance After Spinal Cord Injury

Volition-adaptive control for gait training using wearable exoskeleton: preliminary tests with incomplete spinal cord injury individuals

A Tube-Based Model Predictive Control Method to Regulate a Knee Joint With Functional Electrical Stimulation and Electric Motor Assist

A Hybrid Knee Exoskeleton Using Real-Time Ultrasound-Based Muscle Fatigue Assessment

Real-Time Closed-Loop Functional Electrical Stimulation Control of Muscle Activation with Evoked Electromyography Feedback for Spinal Cord Injured Patients

Classical and adaptive control of ex vivo skeletal muscle contractions using Functional Electrical Stimulation (FES)