Abstract:The combined hydrogenation and catalytic cracking (HCC) process is reported to be able to convert inferior light cycle oil (LCO) into high-quality gasoline efficiently. However, when the LCO rich in tricyclic aromatic hydrocarbons (TAHs) is used as feedstock, a high hydrogenation severity is required to saturate the aromatic rings and abundant gaseous hydrocarbons are generated during the following catalytic cracking process, thereby reducing the gasoline yield and its quality. In this work, the LCO was distilled into light, middle, and heavy fractions, which were rich in mononuclear aromatic hydrocarbons (MAHs), bicyclic aromatic hydrocarbons (BAHs), and TAHs, respectively. Based on the systematic analysis of compositions of hydrogenated LCO fractions and their catalytic cracking products, the optimal hydrogenation severities for each fraction to achieve the maximum gasoline production were determined. A novel combined process of selective hydrogenation and catalytic cracking based on pre-distillation (SHCC-PD) was further proposed. In the SHCC-PD process, LCO was primarily distilled and selectively hydrogenated, thereby delivering an improved catalytic cracking performance with an LCO conversion of ∼66 wt % and selectivity of high-quality gasoline of ∼72 wt %.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.energyfuels.0c02611?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.energyfuels.0c02611</a>.Property test methods of catalysts, sulfidation process of hydrogenated catalyst, detailed reason of selecting the boiling range of three fractions, diagram of distillation equipment, and fixed-bed microreactor unit (Figures S1 and S2), hydrocarbon composition of five narrow fractions (Table S1), hydrocarbon composition of hydrogenated LCO under different hydrogenation severities (Tables S2–S4), and specific hydrogen consumption (Table S5) (<a class="ext-link" href="/doi/suppl/10.1021/acs.energyfuels.0c02611/suppl_file/ef0c02611_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Combined Selective Hydrogenation and Catalytic Cracking Process for Efficient Conversion of Heavy Cycle Oil to High Octane Number Gasoline

Combined mild hydrocracking and fluid catalytic cracking process for efficient conversion of light cycle oil into high-quality gasoline

Efficient Conversion of Light Cycle Oil into Gasoline with a Combined Hydrogenation and Catalytic Cracking Process: Effect of Pre-distillation

Selective hydrocracking of light cycle oil into high-octane gasoline over bi-functional catalysts

Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

Upgrading of Light Cycle Oil to High-Octane Gasoline Through Selective Hydrocracking over Non-Noble Metal Bifunctional Catalysts

Engineering Dual Bed Hydrocracking Catalyst Towards Enhanced High-Octane Gasoline Generation from Light Cycle Oil

Commercial Analysis of Catalytic Hydroprocessing Technologies in Producing Diesel and Gasoline by Light Cycle Oil

Coker Gasoline As a Hydrogen Donor for FCC

Coupling Conversion of CO2 and High‐carbon Alkane to CO and Gasoline

HYDROGENATION OF FLUID CATALYTIC CRACKING GASOLINE FOR DECREASING OLEFINS CATALYZED BY Ni-Mo-P/USY

Direct Production of High Octane Gasoline and ULSD Blend Stocks by LCO Hydrocracking

FCC-Hydrotreating Synergy Improve Refinery Economics

Selective production of high-value fuel via catalytic upgrading of bio-oil over nitrogen-doped carbon-alumina hybrid supported cobalt catalysts

Adsorption Separation and Use of Normal and Iso-hydrocarbons in Hydrogenated Coking Gasoline

Optimizing Both the CoMo/Al2O3 Catalyst and the Technology for Selectivity Enhancement in the Hydrodesulfurization of FCC Gasoline

Role of Catalyst in Optimizing Fluid Catalytic Cracking Performance During Cracking of H-Oil-Derived Gas Oils

Reaction Mechanism and Kinetic Modeling of Hydroisomerization and Hydroaromatization of Fluid Catalytic Cracking Naphtha

Direct Selective Hydrogenation of Fatty Acids and Jatropha Oil to Fatty Alcohols over Cobalt-Based Catalysts in Water

Conversion of CO2 hydrogenation to gasoline over tandem Fe/C and HZSM-5 catalysts