Abstract:Tilt angle measurement in dynamic systems is problematic because the rotation of the measured platform is coupled with translation. Therefore, when some sensors are applied in dynamic systems, their output signals are often submerged in the noise signals generated by translation. To enhance the ability of tilt sensors to resist translational noise, a dynamic tilt sensor is proposed based on the principle of variable reluctance from the perspective of sensor structure. The eccentric structure of the sensor constructed with a shell, liquid, and internal damping plate was designed according to the principles of mechanics. The characteristic of translational acceleration restraint determined by the sensor structure was established theoretically. In addition, the magnetic circuit of the sensor was analyzed to illustrate the sensor’s working principles. A Clapp oscillator circuit was designed to convert mechanical motion into a measureable electrical signal. A method to determine the sensor’s direction of rotation is proposed. A waveform conversion circuit was designed to convert the sine wave output of the Clapp oscillator to a square wave, and a square-wave frequency measurement circuit was designed based on the C8051 micro-control unit. A translation–rotation experimental hardware platform was constructed. The data acquisition program was designed on a PC platform, and the translation–rotation experiments were conducted with an MTi attitude measurement unit as a reference. The validity of the tilt angle measurements and the effect of the translational acceleration restraint of the sensor were verified by the experimental data. The theoretical results obtained were consistent with the experimental data, verifying the validity of the theoretical analysis and experimental devices employed. A measurement range of −180 to 180° was achieved.

Modeling and Optimal Design for a High Stability 2D Optoelectronic Angle Sensor

Determination of Thermally Induced Effects and Design Guidelines of Optomechanical Accelerometers

Accurate mechanical-optical theoretical model of cross-axis sensitivity of an interferometric micro-optomechanical accelerometer

Modeling and Simulating of Optimization-Design for Structure Parameters of Ccd Intersection Measurement System

Optimal design for the supporting structure of the chemical sensor

Nonlinearity Analysis And Parameters Optimization For An Inductive Angle Sensor

Optimal design of multi-axis force strain sensor

A modeling method for the opto-mechanical coupling problems of photoelectric detection and tracking systems in dynamics process

Design and Implementation of a Novel Tilt Sensor Based on the Principle of Variable Reluctance

Optimization and Analysis of Chemical Sensor Structure for Food Hazard Detection

Optimizations of structure stiffnesses and sensitivities of Y-type six-axis force/torque sensor

Modeling and Improvement for the Thermal Stability of Ring-Shaped Workpieces with Shape Boundary Constraints

Development of a 3-DOF Angle Sensor Based on a Single Laser Interference Probe

Optimal design for high precision stiffness surveying instrument

Structural parameter optimization and simulation analysis of the chemical sensor support for food safety detection

Investigation of the thermal deformation of a chip-scale packaged optical accelerometer

Structural stability design of an optical mirror mount adjustment mechanism

Optimal Design of A Cantilever-Based Sensor for Measuring Micro-Forces

MEMS Accelerometer Stability and Temperature Compensation for Long Term Structure Surveillance System

Optical Stabilization System Based on Deformable Mirrors for Retina-Like Sensors.

Direction Error Suppression of Mechanical Wind Sensors by Optimizing the Configuration of Supporting Beams