Abstract:In this article, we report on a unique design and build technique based on stereolithographic 3D printing technology (SLA) for constructing ultraviolet cured resin-made micro-reactors. The main objective of this study is gaining insight into the thermal performance of micro-reactors for optofluidic applications. Several micro-reactors equipped with pin fins were manufactured. A high-fidelity test-rig was developed and used to collect data from water flowing in the micro-reactors as they are exposed to various heat flux loading. The measured data was also used for validating the numerical (CFD) models. The CFD models provided in-depth spatial data on the pressure and temperature profiles in the microchannel, which could not be easily measured. The results showed that conventional empirical correlations failed to accurately predict the pressure drop of the system in the microfluidics regime (Re 190). For both regimes, however, CFD results were sufficiently accurate in predicting the temperature and pressure differences across the micro-reactor. It was also identified that pin fins arrangements offer a great design benefit in enhancing heat transfer coefficient in micro-reactors, achieving values up to ∼2300 W/m2.K compared to a plain micro-reactor at ∼1875 W/m2.K (or 300 W/m2.K for conventional combustion systems). A multi-objective optimisation on the geometrical specifications of various pin fins showed that the micro-reactor with pin fins of 250 µm in diameter and 100 µm in height, yielded the best thermo-hydraulic performance of highest thermal transfer coefficient (2100 W/m2.K) and the lowest pressure- drop (∼0.1 kPa) across a wide range of heat flux loadings. The outcome of this study has created a significant knowledge and understanding of the flow behaviour in polymer-based micro-channels. It also established a methodology for designing and optimising the thermal–hydraulic performance of optofluidic micro-reactors, with potential loading of nano-photocatalyst mediated in pin fins sites. New correlations for predicting the pressure drop and temperature difference across polymer-based micro-reactors are also developed.

3D printing of vacuum and pressure tight polymer vessels for thermally driven chillers and heat pumps

Thermal Post-Processing of 3D Printed Polypropylene Parts for Vacuum Systems

3D Printed Liquid Crystal Polymer Thermosiphon for Heat Transfer under Vacuum

Leveraging 3D Printing for the Design of High-Performance Venturi Microbubble Generators

On the application of components manufactured with stereolithographic 3D printing in high vacuum systems

3D printed autoclavable biocompatible biodegradable bioreactor vessels with integrated sparger made from poly-lactic acid

High Vacuum Capable Fused Filament Fabrication 3D Printer, Part II: High-Temperature Polymers Suitable for In-Space Manufacturing

Challenges with 3D printed parts for hydraulic experimental benchmarks: A perforated plate case study

Testing of 3D Printed Turbulence Promoters for Membrane Filtration

Development of a Custom-Made 3D Printing Protocol with Commercial Resins for Manufacturing Microfluidic Devices

Thermal and flow characteristics of liquid flow in a 3D-printed micro-reactor: A numerical and experimental study

3D printing for membrane separation, desalination and water treatment

Digital light processing 3D printing of microfluidic devices targeting high-pressure liquid-phase separations

Potential of 3D Printing for Heat Exchanger Heat Transfer Optimization—Sustainability Perspective

3D Printing of Thermo-Sensitive Drugs

Application of 3D Printing Technology for Design and Manufacturing of Customized Components for a Mechanical Stretching Bioreactor

Experimental investigation of pressure drop and heat transfer in porous media based on 3D printed triple periodic minimum surfaces

Heat Transfer and Adhesion Study for the FFF Additive Manufacturing Process

Vat photopolymerization 3D printed microfluidic devices for organ-on-a-chip applications

Configurable 3D Printed Microfluidic Multiport Valves with Axial Compression

Material extrusion 3D printing of polyether ether ketone in vacuum environment: Heat dissipation mechanism and performance