Abstract:The construction of the nanohybrid composed of two carbonaceous nanomaterials is a promising strategy to inhibit their aggregation, and effectively exert the advantages of their excellent mechanical properties as reinforcement for polymers. Here, carbon nanotubes (CNTs) were in situ perpendicularly growing on the surface of graphene oxide (GO) through metal-organic frameworks (MOF)-derived strategy by chemical vapor deposition (CVD), aiming to facilitate their dispersion on poly(L-lactic acid) (PLLA) bone scaffold fabricated by selective laser sintering (SLS). Specifically, GO provided nucleation sites for the growth of MOF, and worked as the templates when CNTs grew, in which MOF provided catalysts and carbon sources simultaneously. The precursor was heated to 550 °C and kept for 2 h, then heated to 900 °C and kept for 2 h before cooling. The obtained nanohybrid (GO@CNT) exhibited a superior dispersion state than the pure GO in the scaffold at the same loading, especially when the loading was 0.75 wt%. Adding 0.75 wt% GO@CNT endowed the scaffold with a remarkable increment in tensile strength and compressive strength of 13.36 MPa and 24.72 MPa with enhancement of 55.35% and 18.85%, respectively, compared to the scaffold containing 0.75 wt% GO. A crack extension model combined with experiment results was proposed to better understand reinforcement mechanisms. Additionally, the scaffold containing GO@CNT exhibited benign cytocompatibility with a cell-spreading area of 86.31% and cell density of 564 cells/mm 2 after culturing for 5 d according to the results of cell adhesion and immunofluorescence tests, making it a promising candidate for bone defect repair.

Mechanical and electrical enhancement of super-aligned carbon nanotube film by organic and inorganic doping

Tensile Properties of a Boron/nitrogen-Doped Carbon Nanotube–graphene Hybrid Structure

Carbon-nanotube-templated Carbon Nanofibers with Improved Mechanical Performance

Post-synthesis Carbon Doping of Individual Multiwalled Boron Nitride Nanotubes Via Electron-Beam Irradiation.

Ultrastrong Carbon Nanotube/ Bismaleimide Composite Film with Super-Aligned and Tightly Packing Structure

Stable Doping of Single-Walled Carbon Nanotubes for Flexible Transparent Conductive Films

Carbon Nanotube/Epoxy Composites Fabricated by Resin Transfer Molding

Biomedical investigation of CNT based coatings

Poly( p -phenylene benzobisoxazole) Fiber/Epoxy Composites Reinforced with Carbon Nanotubes and Graphene Oxide for Enhanced Interfacial Adhesion and Mechanical Strength

Fabrication and properties of aligned multiwalled carbon nanotube-reinforced epoxy composites

Elemental Superdoping of Graphene and Carbon Nanotubes.

Electron-Beam-Induced Substitutional Carbon Doping of Boron Nitride Nanosheets, Nanoribbons, and Nanotubes

Mechanical enhancement effect of the interlayer hybrid CNT film/carbon fiber/epoxy composite

Carbon nanotubes perpendicularly grown on graphene oxide nanosheets derived from metal-organic frameworks: Synergistic reinforcement of poly(L-lactic acid) scaffold

Interface enhancement of carbon nanotube/mesocarbon microbead isotropic composites

Mechanical Strength Improvements of Carbon Nanotube Threads through Epoxy Cross-Linking

A Modified Spray-Winding Approach to Enhance the Tensile Performance of Array-Based Carbon Nanotube Composite Films

Biomimetic Carbon Nanotube Films with Gradient Structure and Locally Tunable Mechanical Property

Optimization of Carbon Nanotube Doping on Nonlinear Conductivity, Surface Charge Dissipation and Electric Field Regulation of SiC/SR Composites Insulators Subjected to DC High Voltages

Interfacial Enhancement by CNTs Grafting towards High-Performance Mechanical Properties of Carbon Fiber-Reinforced Epoxy Composites

Enhancement of mechanical properties and conductivity in carbon nanotubes (CNTs)/Cu matrix composite by surface and intratube decoration of CNTs