Abstract:Abstract lithium ion conducting polymer electrolyte is one of the essential components of modern rechargeable lithium batteries because of its good interfacial contact with electrodes and effective mechanical properties. A solid lithium ion conducting polymer blend electrolyte is prepared using poly (vinyl acetate) (PVAc) and poly (methyl methacrylate) (PMMA) polymers with different molecular weight percentages (wt%) of lithium chloride (LiCl) by the solution casting technique with tetrahydrofuran as a solvent. The polymer electrolytes were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), Thermogravimetry (TG), AC impedance spectroscopy and ionic transport measurements. XRD and FTIR studies confirm the amorphous nature of the polymer electrolyte and the complexation of salt with polymer. The thermal behavior of polymer electrolytes has been studied from DSC and TG. The highest conductivity obtained using AC impedance spectroscopy is 1.03×10 −5 Scm −1 at 303 K for 70 wt%PVAc:30 wt%PMMA:0.8 wt% of LiCl polymer-salt complex. The plasticizer ethylene carbonate (EC) and nanofiller titania (TiO 2 ) were added to the optimized high conducting blend polymer electrolyte. An enhancement in conductivity by one order of magnitude was observed for the plasticized 70 wt%PVAc-30 wt%PMMA-0.8 wt% LiCl polymer electrolyte at ambient temperature. The ionic conductivity value obtained using AC impedance spectroscopy for the plasticized 70 wt%PVAc-30 wt%PMMA-0.8 wt% LiCl polymer electrolyte was 1.03×10 −4 Scm −1 . The highest conductivity obtained for 70 wt%PVAc-30 wt%PMMA-0.8% LiCl-6 mg TiO 2 was 4.45×10 −4 Scm −1 . Dielectric properties of polymer films are studied and discussed. The electrochemical stability of 1.69 V and 2.69 V was obtained for 70 wt%PVAc-30 wt%PMMA-0.8% LiCl and 70 wt%PVAc-30 wt%PMMA-0.8% LiCl-6 mg TiO 2 polymer electrolytes, respectively, using linear sweep voltammetry. The value of Li + ion transference number was estimated by the DC polarization method and was found to be 0.99 for the highest conducting 70 wt%PVAc-30 wt%PMMA-0.8 wt% LiCl-6 mg TiO 2 nanocomposite polymer electrolyte.

Electrical and mechanical property of the polyvinyl alcohol based solid electrolyte film contains alum

Electrical and Structural Characterization of PVA/PEG Polymer Blend Electrolyte Films Doped with NaClO 4

A PVB Electrolyte Film and Its Application in Electrochromic Laminated Glass

The Study of the Degree of Crystallinity, Electrical Equivalent Circuit, and Dielectric Properties of Polyvinyl Alcohol (PVA)-Based Biopolymer Electrolytes

Ion-conducting polymer electrolyte based on poly(ethylene oxide) complexed with Li1.3Al0.3Ti1.7(PO4)3 salt

Electrical Properties of Lithium-Ion Conducting Poly (Vinylidene Fluoride-Co-Hexafluoropropylene) (PVDF-HFP)/Polyvinylpyrrolidone (PVP) Solid Polymer Electrolyte

Structural, Morphological, Electrical and Electrochemical Properties of PVA: CS-Based Proton-Conducting Polymer Blend Electrolytes

Studies on structural, dielectric and charge transport properties of PVA:LiBr solid polymer electrolyte films

A New Polymer Electrolyte Based on Poly(ethylene Oxide) Complexed with Li1.3Al0.3Ti1.7(PO4)3 Salt

Preparation and Characterization of an Alkaline Poly(Vinyl Alcohol) Electrolyte with High Ambient Conductivity

Impact of ceria nanofillers on temperature dependent electrical and transport properties of PVA solid polymer electrolyte films

Preparation and characterization of proton conducting polymer blend electrolytes (PVC/PMMA/NH4SCN)

Electrolytic Performance of Sodium Alginate-Poly Vinyl Alcohol Matrix with Ammonium Bromide for Proton Conduction: Applications in Electrochemical Systems

Electrical Properties of Poly(Vinyl Alcohol)/Montmorillonite Composite Membranes by Solution Casting Method

Optimization of salt concentration and Explanation of Two Peak Percolation in Blend Solid Polymer Nanocomposite Films

Electrical, electrochemical and structural studies of a chlorine-derived ionic liquid-based polymer gel electrolyte

Study of PVAc-PMMA-LiCl polymer blend electrolyte and the effect of plasticizer ethylene carbonate and nanofiller titania on PVAc-PMMA-LiCl polymer blend electrolyte

Structural, thermal, and ion dynamics studies of PVA-CS-NaI-based biopolymer electrolyte films

Ionic conductivity enhancement of PVA: carboxymethyl cellulose poly-blend electrolyte films through the doping of NaI salt

Optimized nano-perovskite lanthanum cuprate decorated PVA based solid polymer electrolyte

Structural and Dielectric Properties of PVP Based Composite Polymer Electrolyte Thin Films