Radiation Synthesis and Properties of Imidazolium Hexafluorophosphate Poly(ionic liquid) Gel Electrolytes
Xing-xiao Li,Dong Han,Ting-rui Lin,Yu Cui,Jing Peng,Jiu-qiang Li,Mao-lin Zhai
DOI: https://doi.org/10.11777/j.issn1000-3304.2017.17210
2018-01-01
Acta Polymerica Sinica
Abstract:Poly(ionic liquid) s have been used as electrolytes in lithium-ion battery due to their good electrochemical properties and thermal stability. In this work, we firstly synthesized organic poly(ionic liquid) gel, PC(n)vimPF(6), by gamma-ray radiation inducing polymerization of 1-alkyl-3-vinylimidazolium hexafluorophosphate ([C(n)vim] PF6) (n = 6, 12), with 1,1'-(1,6-ethylidene)-bis(3-vinylimidazolium) hexafluorophosphate as crosslinking agent in a mixed carbonate ester solution. The gel fraction of the resultant gel increased along with the radiation absorbed dose, while the degree of equilibrium swelling (EDS) of the gel decreased, and the changes of the gel fraction and EDS were no longer obvious with the radiation absorbed dose above 20 kGy. FTIR results showed that the characteristic vibration absorption peaks of C= C for [ C(n)vim] PF6 from 1654 cm(-1) to 1656 cm(-1) disappeared after radiation, indicating the successful synthesis of PC(n)vimPF(6) gel. TGA experiment indicated that PC(n)vimPF(6) gel was of good thermal stability. Based on this PC(n)vimPF(6) gel, a novel gel polymer electrolyte (GPE), PC(n)vimPF(6)-Li GPE, was prepared by adding 1 mol/L LiPF6 into monomer solution using one-step radiation synthesis. Effects of the alkyl chain length of the monomer, the contents of the monomer and the crosslinking agent on the property of PC(n)vimPF(6)-Li GPE were investigated. The obtained PC(n)vimPF(6)-Li GPE exhibited good mechanical property and high ionic conductivity. The ionic conductivity of the GPE increased with the decrease of monomer concentration and alkyl chain length, and changed slightly with the content of crosslinking agent. As the monomer concentration increased, the compressive strength (sigma(m)) of the GPE increased, and the compressive strain (epsilon(m)) decreased. The sigma(m) of the GPE ranged from 40 kPa to 1685 kPa, and its ionic conductivity from 1.5 mS/ cm to 7.18 mS/ cm. The highest ionic conductivity (7.18 mS/ cm) was obtained for a sample prepared using 0.4 mol/L C(6)vimPF(6) monomer solution containing 8 mol% of crosslinker and 1 mol/L LiPF6. It is expected that the resultant PC(n)vimPF(6)-Li GPE is a promising candidate for lithium-ion battery electrolytes.