Abstract:Abstract The heat storage technology can improve the performance of a solar thermal utilization system effectively. This work studied the effect of phase-change materials (PCMs) on thermal stratification in a heat storage tank. A 60 l sodium acetate trihydrate heat storage tank with 331.15 K phase-change temperature was designed and fabricated. A mathematical model was built to simulate the discharge process in the water tank, and the temperature distribution during the discharge process was obtained. The computational fluid dynamics model was verified by the experimental data. Furthermore, the Ri, the fill efficiency, and the MIX number were adopted to extensively analyze the performance of a heat storage tank with different positions of PCMs with the variation of flow rates. The results indicated that the distance between the isothermal surfaces of 303.15 K and 348.15 K in PCM1, PCM2, PCM3, and PCM4 were 11.75 cm, 11.13 cm, 10.52 cm, and 9.28 cm, respectively, with 9 l/min of flow velocity when t* = 0.7, showing that the thermal stratification was improved as the position of the PCMs got closer to the inlet. The PCMs’ half-life (the liquefaction rate reached 50%) was prolonged as the inlet flow rates increased. As the flow rate increased from 1 l/min to 5 l/min, the half-life of PCM4 delayed from a dimensionless time of 0.5 to a dimensionless time of 0.9. Moreover, when the flow velocity was 9 L/min, the liquefaction rate of PCM4 remained at 1. The calculated values of fill efficiency and Richardson number were higher than the experimental data slightly, while the MIX number was smaller than the experimental results. The experimental and calculated values of root mean square error (RMSE) increased with the increasing inlet flow velocity and the lowering of the positions of the PCMs.

Numerical simulation on the thermal performance enhancement of energy storage tank with phase change materials

Numerical Investigation of Heat Transfer Characteristics in a Shell- And-Tube Latent Heat Thermal Energy Storage System

STUDY ON CHARGING AND DISCHARGING RATES OF LATENT HEAT THERMAL ENERGY STORAGE SYSTEMS EMPLOYING MULTIPLE PHASE CHANGE MATERIALS

Numerical Analysis of Heat Transfer Behaviours of Melting Process for Ice Thermal Storage Based on Various Heat Source Configurations

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

Experimental investigation of thermal performance in a shell-and-tube phase change thermal energy storage unit with an inner square tube

Numerical investigation of dynamic melting process in a thermal energy storage system using U-tube heat exchanger

Numerical Simulation of Fin-tube Heat Pump with Phase Change Thermal Storage

Simulation on paraffin melting enhancement in shell-tube phase change thermal storage equipment induced by natural convection

Numerical investigation on melting and energy storage density enhancement of phase change material in a horizontal cylindrical container

Heat transfer performance of a phase-change material in a rectangular shell-tube energy storage tank

Numerical Analysis of New PCM Thermal Storage Systems

Experimental and numerical study on thermal performance and inlet and outlet structure optimization of phase change heat storage tank

Studies on performance enhancement of heat storage system with multiple phase change materials

The Thermal Stratification Evaluation of Phase-Change Materials in a Heat Storage Tank: Computational Fluid Dynamics and Experimental Study

Effect of fin number on the melting phase change in a horizontal finned shell-and-tube thermal energy storage unit

Numerical Analysis on a Latent Thermal Energy Storage System with Phase Change Materials and Aluminum Foam

Numerical Simulation On Melting And Solidification Of A Phase-Change Material In An Aluminum Plate-Fin Thermal Storage

Investigation of the Dynamic Melting Process in a Thermal Energy Storage Unit Using a Helical Coil Heat Exchanger

Numerical analysis on performance of naphthalene phase change thermal storage system in aluminum plate-fin unit

Heat Storage Performance of PCM in a Novel Vertical Pointer-Shaped Finned Latent Heat Tank