Abstract:In this study, the nature of the ball-milling mechanism in a ternary materials system (Mg-6Sn-1Na) is investigated for proper mechanical alloying. An identical powder mixture for this material system is exposed to different milling durations for a suitable mixture. First, the platelet structure formation is observed on particles with increasing milling duration, mainly formed in direction of the hexagonal crystal structure of the Mg matrix. Then, the flake structure with texture formation is broken into smaller spherical particles with further ball milling up to 12 h. According to EDS analysis, the secondary phases in the Mg matrix are homogenously distributed with a 12-h milling duration which advises a proper mixture in this material system. The solid solution formation is triggered with an 8-h milling duration according to XRD analysis on 101 reflections. Conventional sintering is performed at 350 °C in 2 h for each sample. In bulk samples, XRD data reveal that secondary phases (Mg2Sn) with island-like structures are formed on the Mg matrix for a milling duration of up to 8 h. These bigger secondary phases are mainly constituted as Mg2Sn intermetallic forms, which have a negative effect on physical and mechanical properties due to a mismatch in the grain boundary formation. However, the homogenous distribution of secondary phases with a smaller particle size distribution, acquired with 12 h milling time, provides the highest density, modulus of elasticity, and hardness values for this ternary materials system. The ternary materials produced with the 12-h ball-milling process provide an improvement of about 117% in hardness value compared with the cast form.

Effects of Ball Size on the Grinding Behavior of Talc Using a High-Energy Ball Mill

Ultrafine dry grinding of talc by planetary mill: effects of operating conditions

Experimental Study and Numerical Simulation of the Influence of Ball Milling on Mechanical and Physical Properties of Matcha Powder

Effect of ball size and powder loading on the milling efficiency of a laboratory-scale wet ball mill

Effect of Ball Size on the Microstructure and Morphology of Mg Powders Processed by High-Energy Ball Milling

Influence of ball size distribution on grinding effect in horizontal planetary ball mill

Effect of Ball Milling Conditions on the Microstructure and Dehydrogenation Behavior of TiH2 Powder

Evaluation of particle size reduction and agglomeration in dry grinding of natural quartz in a planetary ball mill

Effect of Grinding Media Size on Grinding Kinetics of Cement Clinker in Ball Mill

Effect of grinding media on the milling efficiency of a ball mill

Effect of Ball Milling Parameters on Properties of Nano-Sized Tungsten Powder via Mechanochemical Processing

Effect of Ball Grinding Time on the Particle Sizes of Tourmaline to the Release Ability of Negative Ions

Effects of rotation speed and media density on particle size distribution and structure of ground calcium carbonate in a planetary ball mill

Effects of Ball Size Distribution and Mill Speed and Their Interactions on Ball Milling Using DEM

The influence of the weighted average diameter of the ball on the particle size of the final product

INFLUENCE OF HIGH-ENERGY BALL MILLING ON GRAIN SIZE AND STRUCTURE OF Al-Ti-C POWDER MIXTURE

Design and Analysis of Mixture Experiments for Ball Mix Selection in the Ball Milling

Investigating the Influence of Medium Size and Ratio on Grinding Characteristics

The effect of planetary milling conditions on tungsten-carbide (WC) particle size reduction and sintered properties

Analysis Of Alumina Particles Size And Shape Formation From Developed Planetary Ball Mill

Effect of High-Energy Ball Milling in Ternary Material System of (Mg-Sn-Na)