Abstract:Abstract The number of polymer injection projects has greatly increased worldwide in the past decade, with more and more full-field implementations. More recently, the focus has shifted towards deploying such technologies offshore, which presents specific constraints regarding facilities, logistics, or even produced water treatment. Polymer flooding is an EOR technique that has been widely implemented in China. The oil & gas company SINOPEC has gained extensive experience with polymer while developing the Shengli oil fields. The implementation of polymer flooding in the Chengdao offshore oil field was sanctioned in 2019. This large-scale project has seen polymer injection in 43 wells since October 2020. Polymer flooding helps increase oil production and accelerate recovery by providing a better sweep efficiency as a tertiary oil recovery method. It also results in unique environmental benefits with a reduction in CO2 emissions by 52 to 64% per produced barrel of oil. This project consists in injecting polymer solution in 43 wells with an overall injection rate of 32, 000 bbls/d. Polymer concentration is 3, 000 ppm, and well head injection pressure ranges from 90 barg to 130 barg. Considering the significant polymer volumes, a development with powder form has been selected with f 12 tons/day of nominal consumption. While requiring a larger footprint and slightly more CAPEX, it helped significantly reduce OPEX and transportation costs. In addition, specific equipment and technologies have been selected and implemented to prepare a highly viscous polymer solution, reduce maturation time and prevent any form of chemical or mechanical degradation. This paper will also present recent developments with the use of non-shearing choke valves to avoid significant drop in polymer viscosity. This project is now in operation for 18 months (April 2022) with more than 2, 8 million m3 of polymer solution injection. High injection reliability has been achieved (>98%) for all logistics, operations, and topside equipments. The Chengdao 22F EOR polymer flood pilot project drains an oil-bearing area of 3.21 square kilometers with an estimated initial oil in place (STOIIP) of 80.7 million bbls (12.04 million tons) of which 28.8 million bbls (4.3 million tons) are located within the central producing area. A total of 22 injection and 57 production wells have been drilled. It is predicted that cumulative oil production will reach 28.2 million bbls (4.21 million tons) after 15 years, with an estimated incremental oil recovery factor of 11.6% from polymer injection. Following polymer injection, the water cut start to drop from 90.2% down to 85.0% at few production wells and should continue to drop down to 80%. This paper will provide guidelines to help implementing successfully large-scale chemical EOR projects in an offshore environment. It will also present recent developments in non-shearing choke valves and specific equipment to optimize the injection-facilities’ overall footprint.

Review and Prospect of the Development and Field Application of China Offshore Chemical EOR Technology

Status and progress of worldwide EOR field applications

New progress and prospect of oilfields development technologies in China

Technologies of enhancing oil recovery by chemical flooding in Daqing Oilfield, NE China

Inspirations from Field-Reservoir CO2 Flooding with Different Miscible Degrees under Cross-Scale Oil Reservoir Conditions

A Comprehensive Review on Screening, Application, and Perspectives of Surfactant-Based Chemical-Enhanced Oil Recovery Methods in Unconventional Oil Reservoirs

Review of Offshore Chemical Flooding Field Applications and Lessons Learned

Recent Advances in Polymer Flooding in China: Lessons Learned and Continuing Development

Critical review of field EOR projects in shale and tight reservoirs

Status Quo of EOR Technology Development Based on Flue Gas Flooding

Key technologies of polymer flooding in offshore oilfield of Bohai Bay

Application Progress of Reversed-Phase Emulsion Polymerization System in Oil and Gas Field Development

Status and Progress of Enhanced Oil Recovery Technology in Shale Reservoirs

CO2-EOR in China: A comparative review

Progress and prospects of carbon dioxide capture, EOR-utilization and storage industrialization

Advancing PetroChina's Development Strategies for Low-Permeability Oil Reservoirs

Carbon Dioxide Flooding Technology for Ultra-Low Permeability Reservoirs to Greatly Enhance oil Recovery

Eco-development of oil and gas industry: CCUS-EOR technology

Laboratory Evaluation of CO2 Flooding: A Strategic Technology for Sustainable Development of Oil Companies

A Comparative Study of Surfactant Solutions Used for Enhanced Oil Recovery in Shale and Tight Formations: Experimental Evaluation and Numerical Analysis

Offshore Large Scale Polymer Flood Implementation at Chengdao Field