Abstract:Abstract Recently, nanoparticles have proven to enhance oil recovery on the core-flood scale in challenging high-pressure high-temperature reservoirs. Nanomaterials generally appear to improve oil production through wettability alteration and reduction in interfacial tension between oil and water phases. Besides, they are environmentally friendly and cost-effective enhanced oil recovery techniques. Studying the rheological properties of nanoparticles is critical for field applications. The instability of nanoparticle dispersion due to aggregation is considered as an unfavorable phenomenon in nanofluid flooding while conducting an EOR process. In this study, wettability behavior and rheological properties of surface-treated silica nanoparticles using internal olefins sulfonates (IOS 20–24 and IOS 19–23 ), anionic surfactants were investigated. Surface modification effect on the stability of the colloidal solution in porous media and oil recovery was inspected. The rheology of pure and surface-treated silica nanoparticles was investigated using a HPHT rheometer. Morphology and particle size distributions of pure and coated silica nanoparticles were studied using a field emission scanning electron microscope. A series of core-flood runs was conducted to evaluate the oil recovery factor. The coated silica nanoparticles were found to alter rheological properties and exhibited a shear-thinning behavior as the stability of the coated silica nanoparticles could be improved considerably. At low shear rates, the viscosity slightly increases, and the opposite happens at higher shear rates. Furthermore, the surface-modified silica nanoparticles were found to alter the wettability of the aqueous phase into strongly water-wet by changing the contact angle from 80° to 3° measured against glass slides representing sandstone rocks. Oil–water IFT results showed that the surface treatment by surfactant lowered the oil–water IFT by 30%. Also, the viscosity of brine increased from 0.001 to 0.008 Pa s by introducing SiO 2 nanoparticles to the aqueous phase for better displacement efficiency during chemical-assisted EOR. The core-flood experiments revealed that the ultimate oil recovery is increased by approximately 13% with a surfactant-coated silica nanofluid flood after the conventional waterflooding that proves the potential of smart nanofluids for enhancing oil recovery. The experimental results imply that the use of surfactant-coated nanoparticles in tertiary oil recovery could facilitate the displacement efficiency, alter the wettability toward more water-wet and avoid viscous fingering for stable flood front and additional oil recovery.

Innovative Emulsion-Suspension Systems Based on Nanoparticles for Drilling and Well Workover Operation

Study on the Cleanup Mechanism of Microemulsion Acid Based on Microfluidic Experiment

Study on the Mechanism of Nanoemulsion Removal of Water Locking Damage and Compatibility of Working Fluids in Tight Sandstone Reservoirs

Experimental Optimization of High-Temperature-Resistant and Low Oil—Water Ratio High-Density Oil-Based Drilling Fluid

Experimental study of nanoparticle and surfactant stabilized emulsion flooding to enhance heavy oil recovery

Optimization and Characterization of Highly Stable Nanoemulsion for Effective Oil-Based Drilling Fluid Removal

A novel oil-in-water nanoemulsion as a high-temperature plugging agent for wellbore wettability alteration and strengthening

Improvement of Emulsion Stability and Plugging Performance of Nanopores Using Modified Polystyrene Nanoparticles in Invert Emulsion Drilling Fluids

Influence of Nanoemulsion Droplet Size of Removing Water Blocking Damage in Tight Gas Reservoir

Plugging Performance Evaluation of Nanoemulsion in Ultrafine Drilling and Completion Fluid by Pressure Conduction Method

Cooling Damage Characterization and Chemical-Enhanced Oil Recovery in Low-Permeable and High-Waxy Oil Reservoirs

Selective and Reversible Water Shut-Off Technology Based on Emulsion System with Nanoparticles for Low to High Permeabilities Carbonate Reservoirs at HTHS Condition

Preparation and Properties of Reversible Emulsion Drilling Fluid Stabilized by Modified Nanocrystalline Cellulose

Investigation of synergy between nanoparticle and surfactant in stabilizing oil-in-water emulsions for improved heavy oil recovery

Development and performance evaluation of nonionic surfactant-stabilized nanoemulsion for enhanced oil recovery applications in tight reservoir

The flooding mechanism and oil recovery of nanoemulsion on the fractured/non-fractured tight sandstone based on online LF-NMR experiments

Porous Media Flooding Mechanism of Nanoparticle-Enhanced Emulsification System

Cause analysis and solutions of water blocking damage in cracked/non-cracked tight sandstone gas reservoirs

A Feasibility Study on Enhanced Oil Recovery of Modified Janus Nano Calcium Carbonate-Assisted Alkyl Polyglycoside to Form Nanofluids in Emulsification Flooding

Novel water-based drilling and completion fluid technology to improve wellbore quality during drilling and protect unconventional reservoirs

Evaluating the potential of surface-modified silica nanoparticles using internal olefin sulfonate for enhanced oil recovery