Abstract:In recent years, surfactants from modified lignin have received growing attention. Lignin is an inevitable by-product of the chemical manufacturing processes for cellulose and pulping. Furthermore, this class of chemical has vast availability around the world. Lignin modified surfactant is usually prepared by grafting various hydrophobic or hydrophilic groups onto the aromatic nucleus. Due to the interactions of hydrophobic and hydrophilic groups on the interface, lignin modified surfactants present favorable surfactivity, which may be potentially proper for the decontamination of secondary fiber recovery. In this paper, lignin materials, alkali lignin (AL) and lignosulphonate (LS), were prepared through liquefaction treatment into lignin-phenols products. Then, hydrophobic modified LS and hydrophilic modified AL were ordinal synthesized with epoxy chloropropane then with laurinol and polyglycol. The surface tension, watersolubility and HLB value of the productions were characterized. Then the surfactants were applied to the deinking of secondary fiber in flotation process under weak alkali conditions. And the experiments by using the lignin products combined with other nonionic and anionic surfactants were also carried out. Evaluation and comparison were made through the goals of brightness and deinking efficiency. The results showed that the increment of brightness for OMG flotation were 11.04 and 10.61% ISO and the deinking efficiency were 60.85% and 53.06% by individually taking modified AL and LS as deinking agent. Under the condition of the two lignin surfactants mixed with nonionic and anionic surfactants, the results would be improved. The brightness was increased 10.65 and 12.32% ISO and the ratio of deinking was 68.66% and 60.82%. Furthermore, the trials of adding mineral clay to the combined agents were investigated. It was found that it had no negative influence on the deinking results. But, the state of the deinking agent with clay was powder. That means it would be more convenient for the final products in transporting and quantificational application. The results of this study indicated that the surfactants from modified lignin-phenols were fitting to remove OMG ink in weak alkali conditions.

Characterization and Purification of Surfactant Sodium Ligno Sulfonate (SLS) From Biomass Waste in The Application Of Enhanced Oil Recovery (EOR)

Laboratory study: The development of a sodium lignosulfonate (SLS) surfactant formulation for light oil reservoir to improve oil recovery

Improvement of bagasse become lignosulfonate surfactant for oil industry

Preparation of Surfactants for Enhanced Oil Recovery from Alkali Lignin Pretreated with Hydrogen Peroxide.

Utilizing Lignosulfonate from Coconut Husk as Sacrificial Agent to Reduce Surfactant Adsorption

Characterization of isolated lignin from eucalyptus wood chip obtained by liquid hot water process

Synthesis, characterization and performance of lignin carboxyl betaine zwitterionic surfactants for application in enhanced oil recovery

Systematic Investigation of the Physicochemical Properties of Eco-Friendly Biobased Anionic-Nonionic Surfactants for Enhanced Oil Recovery

Synthesis and performance evaluation of polymeric surfactant from rice husk and polyethylene glycol for the enhanced oil recovery process

Performance of SLS Surfactant with Imbibition Methode: Literature Review

Study On The Preparation And Deinking Efficiency Of The Modified Lignin-Phenols Surfactants

Synthesis of Surfactants from Alkali Lignin for Enhanced Oil Recovery

Separation and Purification of Lignosulfonate

Structural characterization of by-product lignins from organosolv rapeseed straw pulping and their application as biosorbents

Adsorption of Saponin Natural Surfactant on Carbonate Rock and Comparison to Synthetic Surfactants: An Enhanced Oil Recovery Prospective

The Impact of Sulfur-Containing Inorganic Compounds during the Depolymerization of Lignin by Hydrothermal Liquefaction of Black Liquor

High extraction and excellent anti-UV and anti-oxidant proprieties of lignin from Reseda Luteola L. waste by organosolv process

Customized Utilization Strategies of Industrial Lignin to Produce Adsorbents and Flocculants Based on Fractionation and Adequate Structural Interpretation

A Salting-Out Extraction Technology of Bio-Oil in Liquefaction Products of Lignin

Solubility Study of Lignin Monomeric Compounds in Deep Eutectic Solvents for Biomass Waste Pre-treatment

Production, characterization and application of biosurfactant produced by Bacillus licheniformis L20 for microbial enhanced oil recovery