Structural characterization of by-product lignins from organosolv rapeseed straw pulping and their application as biosorbents

Vita Halysh,Margarita Skiba,Alla Nesterenko,Tetiana Kulik,Borys Palianytsia

DOI: https://doi.org/10.1007/s10965-022-03368-w

IF: 3.061

2022-11-19

Journal of Polymer Research

Abstract:The feasibility of the pulping technology depends on the efficiency of by-products and solvent recovery. In this regard, the development of an environmentally friendly peracetic method of delignification should be accompanied by the development of an effective method of lignin disposal. Usually, delignification methods are characterized without a detailed study of the by-products. Herein, let's describe the structural and chemical characteristics of lignin, as well as its sorption properties. Pulping liquors after peracetic delignification of rapeseed straw were used in this work. The application of sodium tungstate and sodium molybdate as catalysts gave a significant effect on the dissolution of lignin during pulping. The composition, structure and functional groups of lignins were investigated. Application of catalysts in organosolv pulping resulted in small amounts of carbohydrates in lignins if compare to lignins after non-catalytic pulping. As catalysts, Na 2 WO 4 and Na 2 MoO 4 exhibited no obvious differences in carbohydrate contents and in molecular weights of organosolv lignin (M w = 4910–5640 g/mol, M n = 2350–2500 g/mol). The obtained lignin was successfully used for Methylene Blue adsorption due to high content of functional groups (R-OH = 1.72 mmol/g, Ph-OH = 5.72 mmol/g, R-COOH = 0.88 mmol/g) despite the poorly developed porous structure (11.03 ± 0.35 m 2 /g). Lignin has potential applicability as a biosorbent for wastewater treatment to solve environmental problems of water pollution.

polymer science