Abstract:This paper presents an approach to the Kirchhoff-Love plate theory (KLPT) using the finite difference method (FDM). The KLPT covers the case of small deflections, and shear deformations are not considered. The FDM is an approximate method for solving problems described with differential equations. The FDM does not involve solving differential equations; equations are formulated with values at selected points of the structure. Generally in the case of KLPT, the finite difference approximations are derived based on the fourth-order polynomial hypothesis (FOPH) and second-order polynomial hypothesis (SOPH) for the deflection surface. The FOPH is made for the fourth and third derivative of the deflection surface while the SOPH is made for its second and first derivative; this leads to a 13-point stencil for the governing equation. In addition, the boundary conditions and not the governing equations are applied at the plate edges. In this paper, the FOPH was made for all of the derivatives of the deflection surface; this led to a 25-point stencil for the governing equation. Furthermore, additional nodes were introduced at plate edges and at positions of discontinuity (continuous supports/hinges, incorporated beams, stiffeners, brutal change of stiffness, etc.), the number of additional nodes corresponding to the number of boundary conditions at the node of interest. The introduction of additional nodes allowed us to apply the governing equations at the plate edges and to satisfy the boundary and continuity conditions. First-order analysis, second-order analysis, buckling analysis, and vibration analysis of plates were conducted with this model. Moreover, plates of varying thickness and plates with stiffeners were analyzed. Finally, a direct time integration method (DTIM) was presented. The FDM-based DTIM enabled the analysis of forced vibration of structures, with damping taken into account. In first-order, second-order, buckling, and vibration analyses of rectangular plates, the results obtained in this paper were in good agreement with those of well-established methods, and the accuracy was increased through a grid refinement.

A Kirchhoff plate formulation in a state-based peridynamic framework

The Thermal and Pasternak Foundation Effect on the Transient Behaviors of the Rectangular Plate Using a Novel Semi-Analytical Method

A General-Purpose, Inelastic, Rotation-Free Kirchhoff-Love Shell Formulation for Peridynamics

An Euler–Bernoulli beam formulation in an ordinary state-based peridynamic framework

A Two-Dimensional Ordinary State-Based Peridynamic Model for Elastic and Fracture Analysis

A microstructure-dependent Kirchhoff plate model based on a reformulated strain gradient elasticity theory

A New Type of Peridynamics: Element-based Peridynamics

Analysis of the dynamic response for Kirchhoff plates by the element-free Galerkin method

Dynamic analysis of plates with thick unconstrained layer damping

An Extended Ordinary State-Based Peridynamic Model for Nonlinear Deformation and Fracture

Time-dependent Characteristics of Two-Layer Functionally Graded Plates Adhesively Bonded by a Viscoelastic Interlayer Based on Kirchhoff Plate Theory

Peridynamic Modeling of Elastic-Plastic Ductile Fracture

New Insights into the Bond-Based and Ordinary State-Based Models in Peridynamics

A stable formulation of correspondence‐based peridynamics with a computational structure of a method using nodal integration

An Extended Peridynamic Approach for Deformation and Fracture Analysis

Analytical Solutions for Functionally Graded Sandwich Plates Bonded by Viscoelastic Interlayer Based on Kirchhoff Plate Theory

Twelve-dimensional Stroh-like Formalism for Kirchhoff Anisotropic Piezoelectric Thin Plates

Kirchhoff-Love Plate Theory: First-Order Analysis, Second-Order Analysis, Plate Buckling Analysis, and Vibration Analysis Using the Finite Difference Method

Ordinary State-Based Peridynamic Plastic Model with Drucker-Prager Criterion Considering Geometric Nonlinearity

Study on elastoplastic analysis of metal plate based on peridynamic differential operator

Variable horizon ordinary state-based peridynamic analysis in ANSYS framework