Abstract:This study presents a peridynamic (PD) correspondence model with strain gradient elasticity (SGE) to capture size effect on strength of nano- and micro-scale structures. The classical elasticity theory lacking a length scale parameter does not account for the microstructure-dependent size effects. Strain Gradient (SG) elasticity is an extension of the classical elasticity with a length scale parameter(s) which can be linked to the microstructure of the material. Peridynamic theory introduces damage into the constitutive relations in a natural way by allowing for interactions of a material point within its horizon which is referred to as the internal length parameter. The correspondence model of the PD theory permits the incorporation of the constitutive relationship of SG theory. Therefore, the present approach combines the effects of PD and SGE length scale parameters on the stiffness and strength of the material. The resulting equations present two length parameters: the horizon of a material point in PD theory and the characteristic length in SGE theory. The PD equation of motion with SGE (PDSG) is free of spatial derivatives and allows for the imposition of classical and nonclassical boundary conditions. The PDSG is first applied to investigate the deformation response of a one-dimensional nanoscale film subjected to a quasi-static tensile load and a dynamic load through an initial constant strain. The static response is compared with the analytical solution for varying ratio of SG length parameter to PD horizon. The dynamic response is compared with a computational solution while satisfying the nonclassical boundary conditions. Subsequently, the PDSG is applied to study the deformation response of a two-dimensional nanoscale film subjected to a quasi-static axial load and a specified tangential end displacement. These two cases are considered under special displacement constraints to compare with the available analytical solutions. Subsequently, a two-dimensional nanoscale film with or without an internal crack is subjected to uniform tensile loading. Finally, crack propagation is simulated under incremental displacement loading. The results capture the analytical predictions and the expected increase in stiffness with increasing ratio of SG length parameter to PD horizon.

Ordinary State-Based Peridynamic Plastic Model with Drucker-Prager Criterion Considering Geometric Nonlinearity

A Two-Dimensional Ordinary State-Based Peridynamic Model for Plastic Deformation Based on Drucker-Prager Criteria with Non-Associated Flow Rule

Drucker-Prager Plasticity Model in the Framework of OSB-PD Theory with Shear Deformation

Generalized Plastic Ordinary State-Based Peridynamic Model with Shear Deformation of Geomaterials

An ordinary state-based peridynamic elastoplastic 2D model consistent with J2 plasticity

Ordinary State-Based Peridynamics for Nonlinear Hardening Plastic Materials' Deformation and Its Fracture Process

Ordinary state-based peridynamic model for out-of-plane deformation and damage analysis of composite laminates

Simulation of Highly Nonlinear Materials Based on a Stabilized Non-Ordinary State-Based Peridynamic Model

Numerical estimate of critical failure surface of slope by ordinary state-based peridynamic plastic model

New Insights into the Bond-Based and Ordinary State-Based Models in Peridynamics

Peridynamic simulation of creep deformation and damage

An Orthotropic Peridynamic Shell Model for Linear Elastic Deformation and Crack Propagation

An Extended Ordinary State-Based Peridynamic Model for Nonlinear Deformation and Fracture

Simulating Concrete Cracking and Failure under Impact Loading Using a Novel Constitutive Integration Paradigm in Non-Ordinary State-Based Peridynamics

A Viscoelastic Model of Geometry-Constraint-based Non-Ordinary State-Based Peridynamics with Progressive Damage

Modeling localized failure in geomaterials by large-deformation-plasticity periporomechanics

Peridynamic correspondence model with strain gradient elasticity for microstructure dependent size effects

An Ordinary State-Based Peridynamic Model for Granular Fracture in Polycrystalline Materials with Arbitrary Orientations in Cubic Crystals

A Modified Axisymmetric Ordinary State-Based Peridynamics with Shear Deformation for Elastic and Fracture Problems in Brittle Solids

A Unified Elasto-Viscoplastic Peridynamics Model for Brittle and Ductile Fractures under High-Velocity Impact Loading

Elastoplastic Theory of Finite Deformation and Its Solution Method for Non-Ordinary State-Based Peridynamics