Abstract:This paper presents an approach to the Kirchhoff-Love plate theory (KLPT) using the finite difference method (FDM). The KLPT covers the case of small deflections, and shear deformations are not considered. The FDM is an approximate method for solving problems described with differential equations. The FDM does not involve solving differential equations; equations are formulated with values at selected points of the structure. Generally in the case of KLPT, the finite difference approximations are derived based on the fourth-order polynomial hypothesis (FOPH) and second-order polynomial hypothesis (SOPH) for the deflection surface. The FOPH is made for the fourth and third derivative of the deflection surface while the SOPH is made for its second and first derivative; this leads to a 13-point stencil for the governing equation. In addition, the boundary conditions and not the governing equations are applied at the plate edges. In this paper, the FOPH was made for all of the derivatives of the deflection surface; this led to a 25-point stencil for the governing equation. Furthermore, additional nodes were introduced at plate edges and at positions of discontinuity (continuous supports/hinges, incorporated beams, stiffeners, brutal change of stiffness, etc.), the number of additional nodes corresponding to the number of boundary conditions at the node of interest. The introduction of additional nodes allowed us to apply the governing equations at the plate edges and to satisfy the boundary and continuity conditions. First-order analysis, second-order analysis, buckling analysis, and vibration analysis of plates were conducted with this model. Moreover, plates of varying thickness and plates with stiffeners were analyzed. Finally, a direct time integration method (DTIM) was presented. The FDM-based DTIM enabled the analysis of forced vibration of structures, with damping taken into account. In first-order, second-order, buckling, and vibration analyses of rectangular plates, the results obtained in this paper were in good agreement with those of well-established methods, and the accuracy was increased through a grid refinement.

Analysis of the dynamic response for Kirchhoff plates by the element-free Galerkin method

The Thermal and Pasternak Foundation Effect on the Transient Behaviors of the Rectangular Plate Using a Novel Semi-Analytical Method

Error analysis of the element-free Galerkin method for a nonlinear plate problem

Novel Semi-Analytical Solutions For The Transient Behaviors Of Functionally Graded Material Plates In The Thermal Environment

Analytical and Experimental Study on Deformation of Thin-Walled Panel with Non-Ideal Boundary Conditions

On the integral transform method for dynamic response solutions of simply supported Kirchhoff plates with underwater explosion loading

Semianalytical Three-Dimensional Solutions for the Transient Response of Functionally Graded Material Rectangular Plates

An analytical method for evaluating the dynamic response of plates subjected to underwater shock employing Mindlin plate theory and Laplace transforms

Three-dimensional Transient Analysis of Functionally Graded Material Annular Sector Plate under Various Boundary Conditions

Direct analysis for plate and shell by three-dimensional element free Galerkin method

Dynamics and Active Control of Largely Deflected Active Structures Using the Finite Element Technique

Semi-analytical solution for three-dimensional transient response of functionally graded annular plate on a two parameter viscoelastic foundation

A Semi-Analytical Method to Evaluate the Dynamic Response of Functionally Graded Plates Subjected to Underwater Shock

Transient analysis of laminated composite plates using NURBS-based isogeometric analysis

Nonlinear Dynamic Analysis for Rectangular FGM Plates with Variable Thickness Subjected to Mechanical Load

Non-conforming Trefftz finite element implementation of orthotropic Kirchhoff plate model based on consistent couple stress theory

Stationary/nonstationary stochastic response analysis of composite laminated plates with aerodynamic and thermal loads

A BEM solution to dynamic analysis of plates with variable thickness

An Efficient 3-Node Triangular Plate Element for Static and Dynamic Analyses of Microplates Based on Modified Couple Stress Theory with Micro-Inertia

A sector finite element for dynamic analysis of thick plates

Kirchhoff-Love Plate Theory: First-Order Analysis, Second-Order Analysis, Plate Buckling Analysis, and Vibration Analysis Using the Finite Difference Method