Abstract:Gear profile grinding is more complex than surface grinding owing to the specific shape of the grinding wheel and geometric characteristics of the gear tooth, resulting in difficulties in modeling grinding components. Consequently, conventional grinding models tend to fail. To address this issue, a novel semi-analytical modeling method of the material removal mechanism and surface generation for gear profile grinding is proposed. Firstly, the grinding wheel model is represented by a multi-information fusion matrix that contains kinds of information about grinding grits. Compared with the traditional models that require several matrices to represent respective information, the proposed wheel model incorporates multi-dimensional information without extending the original matrix size and data length, which is more efficient. Then, a numerical model for the grinding process is developed by analyzing grit kinematics and grit-workpiece contact to reveal the material removal mechanism, and it is found that the cross-section shape of 3D cutting chips changes in the direction of the contact line. Furthermore, a surface topography model is established considering the specific pile-up effect. In this process, based on the length conservation of the tooth profile curve after straightening, the body Boolean operation is replaced by matrix calculation which reduces the dimension of data from 3D to 2D. Thus, computing time is reduced greatly, and this method does not require knowledge of the generation mechanism for tooth profile. Finally, experiments are conducted and the effects of grinding parameters on surface topography are investigated. The experimental results match well with model predictions, proving the model is effective. This work provides further understanding of the material removal mechanism for gear profile grinding. Meanwhile, it can also be extended and applied to other grinding processes for workpieces with complex geometry.

Thread Milling Cutter Flute Production Possibility Research by Using Typical Profiles Grinding Wheels

Numerical Simulation for the Milling of Alluminum Alloy Thin-Wall Workpiece with Two and Four Flutes Helical Cutter

An optimized calculation method of the grinding wheel profile for the helical flute forming grinding

Research on the key technique for numerical control grinding arbitrary n-polygon shafts

Cad System of Forming Grinding Wheel for Relief Milling Cutter with High Accuracy

A novel wheel path generation approach for grinding taper end-mills subjected to variable cross-section

Grinding of fir tree slots of powder metallurgy superalloy FGH96 using profiled electroplated CBN wheel

Research on CNC turning technology of threads

Parametric Modeling of Gear Cutting Tools

Study on the forming process of thread raceway surface under the hard whirling

A Novel Design Method for Chip Flute of Indexable Insert Drill Used at Large Drilling Depth

Numerical modeling of material removal mechanism and surface topography for gear profile grinding

A Study on the Influence of Central Edge Absence in Helical Grinding for Micro-Hole Fabrication

Theoretical investigation on the flank milled roughness profile in quasi-homogeneous materials

Computer Simulation Technology in the Process of Shaping Milling Cutter Relief Grinding

Experimental Method of Machining Gears with an Involute Profile Using CNC Lathe with Driven Tools

Geometric definition, rapid prototyping, and cutting force analysis of cylindrical milling tools with arbitrary helix angle variations

Research of the characteristics of flat grinding wheels for high-speed machining based on numerical modeling

Machining of grinding wheels with single point cutting tools.

The Modelling and Analysis of Topographical Properties with the 'Through-the-process' Grinding Wheel Model

Experimental Research on Deep-And-Narrow Micromilled Grooves Using a Self-Fabricated PCD Micro-Cutter