Abstract:Additive manufacturing (AM) is gaining popularity as it can produce near-net geometries and work with difficult-to-manufacture materials, such as stainless steel 316L. However, due to the low surface quality of AM parts, machining and other finishing methods are required. Laser powder bed fusion (LPBF) components can be difficult to finish as the surface roughness (Sa) can vary greatly depending on the part's orientation, even when using the same machining parameters. This paper explored the effects of finishing (milling) SS 316L LPBF components in a variety of part orientations. The effect of layer thickness (LT) variation in LPBF-made components was also studied. LPBF parts of 30, 60, 80, and 100 μm layer thicknesses were created to analyze the effect of the LT on the final milling process. Additionally, the effect of cutting speed during the milling process on the surface roughness of the SS 316L LPBF component was investigated, along with the orientations and layer thicknesses of the LPBF components. The results revealed that the machined surface undergoes significant orientation and layer thickness changes. The investigations employed a factorial design, and analysis of variance (ANOVA) was used to analyze the results. In addition, an artificial neural network (ANN) model was combined with particle swarm optimization (denoted as ANN-PSO) and the genetic algorithm (denoted as ANN-GA) to determine the optimal process conditions for machining an SS 316L LPBF part. When milled along (Direction B) an orientation with a cutting speed of 80 m/min, the LPBF component produced, with a layer thickness of 60 μm, achieves the lowest surface roughness. For instance, the Sa of a milled LPBF part can be as low as 0.133 μm, compared to 7.54 μm for an as-fabricated LPBF part. The optimal surface roughness was 0.155 μm for ANN-GA and 0.137 μm for ANN-PSO, whereas the minimal surface roughness was experimentally determined to be 0.133 μm. Therefore, the surface quality of both hybrid algorithms has improved, making them more efficient.

Optimization of surface roughness in FDM 3D printer using response surface methodology, particle swarm optimization, and symbiotic organism search algorithms

Optimization of FDM process parameters to minimize surface roughness with integrated artificial neural network model and symbiotic organism search

Optimization of Resin Printing Parameters for Improved Surface Roughness Using Metaheuristic Algorithms: A Multifaceted Approach

Analyzing Surface Roughness Variations in Material Extrusion Additive Manufacturing of Nylon Carbon Fiber Composites

Optimization of 3D printing process parameters to minimize surface roughness with hybrid artificial neural network model and particle swarm algorithm

Quantitative Analysis of Surface Profile in Fused Deposition Modelling

A response surface methodology investigation into the optimization of manufacturing time and quality for FFF 3D printed PLA parts

Parametric Optimization of FDM Process for PA12-CF Parts Using Integrated Response Surface Methodology, Grey Relational Analysis, and Grey Wolf Optimization

Parametric Optimization of Fused Deposition Modelling (FDM) Process Using PSO Algorithm

Enhanced Surface Quality and Strength of FDMed Specimens Using BBD and Bio-Inspired Algorithms

Fused Deposition Modeling Five-Axis Additive Manufacturing: Machine Design, Fundamental Printing Methods and Critical Process Characteristics

Building Orientation Determination Based On Multi-Objective Optimization For Additive Manufacturing

Optimization of the Print Quality by Controlling the Process Parameters on 3D Printing Machine

Optimization of printing parameters in fused deposition modeling for improving part quality and process sustainability

OPTIMIZATION OF ANNEALING AND 3D PRINTING PROCESS PARAMETERS OF PLA PARTS

Optimization of the Effect of Laser Power Bed Fusion 3D Printing during the Milling Process Using Hybrid Artificial Neural Networks with Particle Swarm Optimization and Genetic Algorithms

Modeling and optimization of fused deposition modeling (FDM) process through printing PLA implants using adaptive neuro-fuzzy inference system (ANFIS) model and whale optimization algorithm

FDM-3D printing parameter optimization using taguchi approach on surface roughness of thermoplastic polyurethane parts

Improving surface roughness of polylactic acid (PLA) products manufactured by 3D printing using a novel slurry impact technique

Single and Multi-objective Optimization of Processing Parameters for Fused Deposition Modeling in 3D Printing Technology

Optimizing Surface Finish in FDM-Printed Polycarbonate Spur Gears through Abrasive Flow Finishing: Insights from Physics and Material Science Perspectives