Abstract:Purpose Fused Filament Fabrication (FFF) is one of the growing technologies in additive manufacturing, that can be used in a number of applications. In this method, process parameters can be customized and their simultaneous variation has conflicting impacts on various properties of printed parts such as dimensional accuracy (DA) and surface finish. These properties could be improved by optimizing the values of these parameters. Design/methodology/approach In this paper, four process parameters, namely, print speed, build orientation, raster width, and layer height which are referred to as "input variables" were investigated. The conflicting influence of their simultaneous variations on the DA of printed parts was investigated and predicated. To achieve this goal, a hybrid Genetic Algorithm – Artificial Neural Network (GA-ANN) model, was developed in C#.net, and three geometries, namely, U-shape, cube and cylinder were selected. To investigate the DA of printed parts, samples were printed with a central through hole. Design of Experiments (DoE), specifically the Rotational Central Composite Design method was adopted to establish the number of parts to be printed (30 for each selected geometry) and also the value of each input process parameter. The dimensions of printed parts were accurately measured by a shadowgraph and were used as an input data set for the training phase of the developed ANN to predict the behavior of process parameters. Then the predicted values were used as input to the Desirability Function tool which resulted in a mathematical model that optimizes the input process variables for selected geometries. The mean square error of 0.0528 was achieved, which is indicative of the accuracy of the developed model. Findings The results showed that print speed is the most dominant input variable compared to others, and by increasing its value, considerable variations resulted in DA. The inaccuracy increased, especially with parts of circular cross section. In addition, if there is no need to print parts in vertical position, the build orientation should be set at 0° to achieve the highest DA. Finally, optimized values of raster width and layer height improved the DA especially when the print speed was set at a high value. Originality/value By using ANN, it is possible to investigate the impact of simultaneous variations of FFF machines' input process parameters on the DA of printed parts. By their optimization, parts of highly accurate dimensions could be printed. These findings will be of significant value to those industries that need to produce parts of high DA on FFF machines.

Optimization of 3D printing process parameters to minimize surface roughness with hybrid artificial neural network model and particle swarm algorithm

Predicting and optimising the surface roughness of additive manufactured parts using an artificial neural network model and genetic algorithm

Optimization of surface roughness in FDM 3D printer using response surface methodology, particle swarm optimization, and symbiotic organism search algorithms

Optimization of FDM process parameters to minimize surface roughness with integrated artificial neural network model and symbiotic organism search

Optimization of Resin Printing Parameters for Improved Surface Roughness Using Metaheuristic Algorithms: A Multifaceted Approach

Development of a Genetic Algorithm – Artificial Neural Network model to optimize the Dimensional Accuracy of parts printed by FFF

Quantitative Analysis of Surface Profile in Fused Deposition Modelling

Optimizing FDM process parameters: predictive insights through taguchi, regression, and neural networks

Modeling and prediction of surface roughness and dimensional accuracy in SLS 3D printing of PVA/CB composite using the central composite design

Optimization of the Effect of Laser Power Bed Fusion 3D Printing during the Milling Process Using Hybrid Artificial Neural Networks with Particle Swarm Optimization and Genetic Algorithms

Single and Multi-objective Optimization of Processing Parameters for Fused Deposition Modeling in 3D Printing Technology

Analyzing Surface Roughness Variations in Material Extrusion Additive Manufacturing of Nylon Carbon Fiber Composites

Refined dimensional accuracy in FDM components via ensemble weight-optimized surrogates and hybrid NSGA-II-TOPSIS optimization

Building Orientation Determination Based On Multi-Objective Optimization For Additive Manufacturing

FDM-3D printing parameter optimization using taguchi approach on surface roughness of thermoplastic polyurethane parts

Parametric Optimization of FDM Process for PA12-CF Parts Using Integrated Response Surface Methodology, Grey Relational Analysis, and Grey Wolf Optimization

Optimization of 3D Printing Parameters on Deformation by BP Neural Network Algorithm

Surface Quality Evaluation of 3D-Printed Carbon-Fiber-Reinforced PETG Polymer During Turning: Experimental Analysis, ANN Modeling and Optimization

OPTIMIZATION OF ANNEALING AND 3D PRINTING PROCESS PARAMETERS OF PLA PARTS

Parametric Optimization of Fused Deposition Modelling (FDM) Process Using PSO Algorithm

Optimization of the Print Quality by Controlling the Process Parameters on 3D Printing Machine