Abstract:Microcrystalline cellulose (MCC) was successfully synthesized from sugarcane bagasse using a rapid, low-temperature hydrochloric acid (HCl) gas treatment. The primary aim was to develop an energy-efficient "green" cellulose extraction process. Response surface methodology optimized the liquid-phase hydrolysis conditions to 3.3 % HCl at 117 °C for 127 min to obtain MCC with 350 degree of polymerization. An alternative gas-phase approach utilizing gaseous HCl diluted in hot 40 °C air was proposed to accelerate MCC production. The cellulose pulp was moistened to 15–18 % moisture content and then exposed to HCl gas, which was absorbed by the moisture in the cellulose fibers to generate a highly concentrated acidic solution that hydrolyzed the cellulose. The cellulose pulp was isolated from depithed bagasse through soda pulping, multistage bleaching and cold alkali purification. Hydrolysis was conducted by saturating the moist cellulose fibers with gaseous HCl mixed with hot air. Extensive analytical characterization using FT-IR, XRD, SEM, TGA, DSC, particle size, and porosity analyses verified comparable physicochemical attributes between MCC samples prepared via liquid and gas phase methods. The gas-produced MCC revealed 85% crystallinity, 71 Å crystallite dimensions, and thermally stable rod-shaped morphology with an average diameter below 200 μm. The similar material properties validate the proposed gas-based technique as an equally effective yet more energy-efficient alternative to conventional aqueous acid hydrolysis for fabricating highly pure MCC powders from lignocellulose. This sustainable approach enables the value-addition of sugarcane bagasse agro-industrial residue into cellulosic nanomaterials for wide-ranging industrial applications. In summary, the key achievements of this work are rapid MCC production under mild temperatures using HCl gas, optimization of liquid phase hydrolysis, successful demonstration of gas phase method, and extensive characterization verifying equivalence between both protocols. The gas methodology offers a greener cellulose extraction process from biomass.

Fabrication of biocomposite membrane with microcrystalline cellulose (MCC) extracted from sugarcane bagasse by phase inversion method

Composite Membranes Based on Polybenzimidazole and Ionic Liquid Functional Si–O–Si Network for HT-PEMFC Applications

Novel Cross-Linked Membranes Based on Polybenzimidazole and Polymeric Ionic Liquid with Improved Proton Conductivity for HT-PEMFC Applications

Simultaneously enhancing microelastic response and degradability for poly(butylene succinate) composite monofilaments by silanized microcrystalline cellulose

Composite Proton Exchange Membranes Based on Inorganic Proton Conductor Boron Phosphate Functionalized Multi-Walled Carbon Nanotubes and Chitosan

Fabrication of Dual-Functional Bacterial-Cellulose-Based Composite Anion Exchange Membranes with High Dimensional Stability and Ionic Conductivity.

Comprehensive characterization of novel Borassus flabellifer flower biomass based microcrystalline cellulose reinforced with polylactic acid (PLA) biofilm for futuristic applications

Highly Ion-Conductive Anion Exchange Membranes with Superior Mechanical Properties Based on Polymeric Ionic Liquid Filled Functionalized Bacterial Cellulose for Alkaline Fuel Cells

Poly(butylene succinate)/cellulose composite monofilaments with microelastic response based on interfacial bonding

Preparation of microcrystalline cellulose from Rabdosia rubescens residue and study on its membrane properties

Novel bacterial cellulose nanocrystals/polyether block amide microporous membranes as separators for lithium-ion batteries

Interfacial interaction enhancement between biodegradable poly (butylene adipate-co-terephthalate) and microcrystalline cellulose based on covalent bond for improving puncture, tearing, and enzymatic degradation properties

Study on the Preparation and Properties of Jute Microcrystalline Cellulose Membrane

Use of Lignocellulosic Components of Sugarcane Bagasse to Obtaining Polymeric Composite Membranes

Effect of empty fruit bunches microcrystalline cellulose (MCC) on the thermal, mechanical and morphological properties of biodegradable poly (lactic acid) (PLA) and polybutylene adipate terephthalate (PBAT) composites

Solvent-free Cellulose Nanocrystal Fluids for Simultaneous Enhancement of Mechanical Properties, Thermal Conductivity, Moisture Permeability and Antibacterial Properties of Polylactic Acid Fibrous Membrane

Novel method for the preparation of ionically crosslinked sulfonated poly(arylene ether sulfone)/polybenzimidazole composite membranes via in situ polymerization

Comparative study on liquid versus gas phase hydrochloric acid hydrolysis for microcrystalline cellulose isolation from sugarcane bagasse

Sustainable Microcrystalline Cellulose-graft-Diblock Bottlebrush Copolymer Elastomers Derived from All Biomass Sources

Starch-based biocomposite membrane reinforced by orange bagasse cellulose nanofibers extracted from ionic liquid treatment

Fabrication of Cellulose Acetate-Based Proton Exchange Membrane with Sulfonated SiO2 and Plasticizers for Microbial Fuel Cell Applications