Abstract:A novel hydrogenated nitrile rubber (HNBR) composite filled with organically modified Al2O3 nanoparticle was fabricated. The effects of the nano‐Al2O3 with different particle sizes on the curing, mechanical, and tribological properties of the HNBR composites were studied. The results indicate the curing, mechanical, and tribological properties of the HNBR composites were improved for the addition of nano‐Al2O3, and the smaller nano‐Al2O3 size was, the more obvious the effect was. The HNBR composite filled with 10 nm nano‐Al2O3 had the better mechanical properties and anti‐wear performance due to that the 10 nm nano‐Al2O3 could form denser cross‐linked network. A novel hydrogenated nitrile butadiene rubber (HNBR) composite filled with organically modified Al2O3 nanoparticle was fabricated. The effects of nanoparticle Al2O3 (nano‐Al2O3) with different particle sizes on the curing, mechanical, and tribological properties of the HNBR composites were studied. Nano‐Al2O3 with different particle sizes (i.e. 10, 50, 100, and 200 nm) was filled into the HNBR in this work. Attenuated total reflection Fourier transform infrared (ATR‐FTIR) spectroscopy was used to investigate the degree of grafting between modified nano‐Al2O3 and rubber matrix. Universal material testing machine was used to study the mechanical properties of the HNBR composites. The tribological properties of the HNBR composites were tested by a ballon‐on‐disk tribometer. The wear morphology of the HNBR composite surface was examined by scanning electron microscopy (SEM). The test results reveal that the nano‐Al2O3 as filler of HNBR composite promoted the vulcanization process, improved tensile and compressive strength, and increased hysteresis energy density and the damping coefficient. And the mechanical properties of the HNBR composite improved gradually with the decrease of nano‐Al2O3 particle size. The friction and wear test results show that the addition of nano‐Al2O3 greatly reduced the dry friction coefficient and specific wear rate of HNBR composites, and the friction coefficient and wear rate decreased gradually with the decrease of nano‐Al2O3 size. The HNBR composite filled with 10 nm nano‐Al2O3 had the better mechanical properties and anti‐wear performance due to that the 10 nm nano‐Al2O3 could form denser cross‐linked network.

The Influence of Adopted Chemical Modification Route on the Thermal and Mechanical Properties of Alumina Nanoparticles-Impregnated Thermoplastic Natural Rubber Nanocomposite

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Effect of Trimethylolpropane Triacrylate Cross-Linkages on the Thermal Stability and Char Yield of Poly (methyl Methacrylate) Nanocomposites

Improvement of Electrical and Material Properties of Epoxy Resin/aluminum Nitride Nanocomposites for Packaging Materials

Effect of surface functional modification of nano-alumina particles on thermal and mechanical properties of epoxy nanocomposites

Improving the Thermal and Mechanical Properties of an Alumina-Filled Silicone Rubber Composite by Incorporating Carbon Nanotubes

Preparation of nanoalumina/EPDM composites with good performance in thermal conductivity and mechanical properties

Preparation and investigation of properties of deproteinized natural rubber nanocomposites incorporating functionalized nano‐alumina by in situ emulsion polymerization

Influence of Phase and Morphology on Thermal Conductivity of Alumina Particle/Silicone Rubber Composites

The effect of alumina nanoparticles on the thermal properties of PMMA: a molecular dynamics simulation

Preparation and mechanical properties of natural rubber composites reinforced by modified molybdenum disulfide

Effect of Modified Natural Rubber on the Mechanical and Thermal Properties of Poly(Lactic Acid) and Its Composites with Nanoparticles from Biowaste

Preparations and Thermal Properties of PDMS-AlN-Al2O3 Composites through the Incorporation of Poly(Catechol-Amine)-Modified Boron Nitride Nanotubes

Synergistic reinforcing of poly(lactic acid) by poly(butylene adipate‐ co ‐terephthalate) and alumina nanoparticles

Constructing of strawberry-like core-shell structured Al2O3 nanoparticles for improving thermal conductivity of nitrile butadiene rubber composites

Investigating the Effect of Nano-Crystalline Cellulose in Nitrile Butadiene Rubber Matrix for Improved Thermo-Mechanical Properties

Curing, mechanical, and tribological properties of hydrogenated nitrile butadiene rubber reinforced with Al2O3 nanoparticles

Effect of Different Surface Treatment Agents on the Physical Chemistry and Electrical Properties of Polyethylene Nano‐alumina Nanocomposites

Study on the Effect of Halloysite Nanotubes on the Mechanical Properties and Swelling Resistance of Ethylene-Propylene Diene Monomer (EPDM)/Nitrile Butadiene Rubber (NBR) Blend Nanocomposites

Bio-based thermoplastic natural rubber based on poly(lactic acid)/thermoplastic starch/calcium carbonate nanocomposites

Thermal and mechanical characterization of alumina modified multifunctional novolac epoxy nanocomposites