Abstract:Natural rubber (NR) composites filled with silica are typically used for tire tread applications owing to their low energy consumption and low rolling resistance. Tire tread properties vary broadly depending on the compound formulation and curing conditions. Silica loading is recognized as a critical factor influencing the mechanical properties of the composites. In this work, we aim to investigate the effect of silica loading (10–50 phr) on the mechanical properties of NR composites. Silica was prepared from rice husk waste via chemical treatment and subsequent calcination at 600 °C. Prior to the compound mixing process, silica was modified by a silane coupling agent to improve compatibility with the NR matrix. The NR compounds reinforced with silane-modified silica from rice husk were prepared using a two-roll mill machine. The scorch and cure times increased as the silica loading increased. The mechanical properties of the NR composites, including tensile strength, elongation at break, modulus, hardness, and abrasion loss, were examined as a function of silica loading. Tensile strength increased and reached the maximum value at 20 phr but decreased at high loading owing to the agglomeration of silica in the NR matrix. With increasing silica loading, hardness and modulus increased, whereas elongation at break and abrasion resistance decreased slightly. These results indicate that NR composites filled with silica are stiffer and harder at a higher silica loading due to the strong interaction between silica and the NR matrix, inhibiting the segmental mobility of rubber chains. We anticipate that the compound formulation presented in this work could potentially be adapted to tire tread applications.

Preparation and mechanical properties of natural rubber composites reinforced by modified molybdenum disulfide

Preparation of high-performance natural rubber/carbon black/molybdenum disulfide composite by using the premixture of epoxidized natural rubber and cysteine-modified molybdenum disulfide

MONTMORILLONITE REINFORCED SBR AND EFFECT ON THE VULCANIZATION OF RUBBER

The influence of molybdenum disulfide nanoplatelets on the dispersion of nano silica in natural rubber composites

Remarkably improving performance of carbon black-filled rubber composites by incorporating MoS2 nanoplatelets

The influence of MoS2/carbon dots hybrid particles on mechanical properties of natural rubber latex

Preparation of nano‐reinforced thermal conductive natural rubber composites

Influence of Molybdenum Disulfide on Properties of NBR Compound

Influence of Graphene Oxide and Multiwalled Carbon Nanotubes on the Dynamic Mechanical Properties and Heat Buildup of Natural Rubber/carbon Black Composites

Natural rubber nanocomposites: effect of carbon black/multi-walled carbon nanotubes hybrid fillers on the mechanical properties and thermal conductivity

Preparation and Properties of Modified Molybdenum Disulfide/NBR Composite

Carbon nanotubes/carbon black synergistic reinforced natural rubber composites

Properties of Carbon Nano-tube/Nano-alumina/Natural Rubber Composites

Natural Rubber Composites Reinforced with Green Silica from Rice Husk: Effect of Filler Loading on Mechanical Properties

Synergistic effects of silane‐modified carbon black and nano‐silica hybrid fillers on the performance of natural rubber compounds

Improved Mechanical Properties of Natural Rubber Composites Reinforced by Novel SiO 2 @hcnfs Nanofillers at a Low Filler Loading

Influence of Poly(methyl Methacrylate) Grafted Multiwalled Carbon Nanotubes on the Mechanical and Thermal Properties of Natural Rubber Nanocomposites

Influence of Partial Substitution for Cb with Mwnts on Performance of Cb-Filled Nr Composites

Preparation of MOF‐Zn@ZnO Composite and Its Properties in SBR

Improving performance of natural rubber composites through the novel silica modified by a crosslinking agent

Synergistic effect of hybrid montmorillonite materials on the wear resistance of natural rubber/butadiene rubber composites