Abstract:Rationale: Materials based on the Al2 O3 -SiO2 -ZrO2 system are promising for a wide range of high-temperature technological applications, such as thermal barrier coatings in the aviation and space industry or advanced materials in nuclear power reactors. Experimental studies of the ceramics based on this system by the Knudsen effusion mass spectrometric (KEMS) method are of significant interest in designing technological processes for the synthesis and exploitation of the Al2 O3 -SiO2 -ZrO2 materials. Methods: Samples of ceramics in the Al2 O3 -SiO2 -ZrO2 system, including the Al2 O3 -ZrO2 and SiO2 -ZrO2 binaries, were prepared by solid-state synthesis. Analysis of the samples was performed by X-ray fluorescence and diffraction techniques. The vapor composition and thermodynamic properties of the components in this system were determined by KEMS. The derived thermodynamic functions were optimized within the generalized lattice theory of associated solutions (GLTAS). Results: In the temperature range 1900-2600 K, the SiO, Al, AlO, Al2 O, ZrO, ZrO2 , and O vapor species were identified over the samples in the systems under study. For the thermodynamic properties to be determined correctly, the samples of the Al2 O3 -SiO2 -ZrO2 system had to be vaporized at temperatures less than 2000 K, where data could be obtained only for the SiO species. The SiO2 activities obtained were taken as the experimental basis for the modeling within the GLTAS approach. This allowed evaluation of the component activities and excess Gibbs energy, and assessment of the relative number of bonds of different types. Conclusions: At 1920 K, the Al2 O3 -SiO2 -ZrO2 system is characterized by negative deviations of its thermodynamic properties from the ideal behavior. The consistency of the obtained modeling results was illustrated by comparison of the values derived from the data for the ternary and the boundary binary systems and thereby indicates the reasonable uniformity of the energy parameters of the lattice model derived in the calculations, which may be used in further modeling of multicomponent systems.

Investigation of heat and mass transfer in sublimation of solid particles

A volume-shrinkage-based method for quantifying the inward solidification heat transfer of a phase change material filled in spherical capsules

Molecular kinetic aspects of vaporization of volatile coordination compounds with organic ligands

Numerical Investigate on the Heat Transfer Performance and Mechanical Analysis of a Water Sublimator{fr}Étude numérique et analyse mécanique des propriétés de transfert de chaleur des sublimateurs d'eau

Hydrodynamics and Heat Transfer in a Fluidized Bed with Liquid Spray: Particle Color-Change Based Measurement and Modelling

In Situ Atomic‐Scale Observation of Kinetic Pathways of Sublimation in Silver Nanoparticles

Study of Znse Powder Mass Depleted in Temperature Field

Experimental Study of Carbon Dioxide Desublimation and Sublimation Process on Low Temperature Surface

The Study of Heat Process and Molten State of Sprayed Particles in Plasma Jet

High-temperature mass spectrometric study and modeling of ceramics based on the Al2 O3 -SiO2 -ZrO2 system

Simulation Study of Heat Transfer in Multi-Stage Rapid Solidification

Sublimation rate of solid NaCl powders and evaporation rate of liquid NaCl upon heating in vacuum and air

Study on synthesis, characterization, stability and sublimation behavior of yttrium (III) dipivaloylmethane chelate

Numerical Study of Heat Transfer and Solidification Behavior of Gas-Atomized Fe-6.5% Si (mass Fraction) Droplets

Experimental Investigation on Heat Transfer of Co(2) Solid-Gas Two Phase Flow with Dry Ice Sublimation

Heat and mass transfer characteristics of Al2O3/H2O and (Al2O3+Ag)/H2O nanofluids adjacent to a solid sphere: A theoretical study

Analytical study of a moving boundary problem describing sublimation process of a humid porous body with convective heat and mass transfer

In Situ Observation on Dislocation-Controlled Sublimation of Mg Nanoparticles.

Studies of splat morphology and rapid solidification during thermal spraying

Numerical modelling and simulation of heat transfer for micro-sized spherical Al-4.5 wt% Cu alloy particles

Dynamics of Heat and Mass Transfer during the Injection of Dispersed Adsorbent into Steam-Gas Flow