Abstract:High-speed permanent magnet synchronous motors (PMSMs) are usually started with the hybrid low-speed open-loop and high-speed closed-loop control mode. However, low-speed open-loop control produces large starting current, or even current overload, resulting in demagnetization and motor damage. Therefore, there is an urgent need to develop a high-speed permanent magnet synchronous motor with self-starting ability at low speed, that is, a permanent magnet hysteresis motor (PMHM). This paper takes the permanent magnet ring hysteresis column rotor structure as the research object. Firstly, the performance of this type of rotor is improved using the micro level of effective layer material AlNiCo, and the mechanical properties of AlNiCo are calculated. Secondly, based on the thick-walled cylinder theory, the analytical model for calculating the strength of the composite rotor considering the temperature effect is deduced, and the tangential and radial stress distribution for each part of the rotor under no-load and load conditions are obtained. Then, the electromagnetic losses and temperature field distribution of the rotor are obtained using the magneto-thermal bidirectional coupling finite element method. Finally, strength of the thermal rotor is analyzed by substituting the temperature rise curve function and AlNiCo parameters at the operating temperature. The comparison of the stress calculation results of the semi-analytical solution and the finite element method showed that the error between both of them is less than 5%, which verified that the semi-analytical solution can accurately analyze the thermal stress distribution of the rotor during high-speed rotation.

Analysis of a High-Torque PM Vernier Motor with Thick Embedded Permanent Magnets using the Frozen Permeability Method

A Novel Analytical Frozen Permeability Method for Saturated Surface-Mounted Permanent Magnet Machines

A Cogging Torque Reduction Method for Surface Mounted Permanent Magnet Motor

Effect of Magnet Thickness on Electromagnetic Performance of High Speed Permanent Magnet Machines

Analysis and Suppression of Cross-Coupling Demagnetization in Dual Permanent Magnet Machine for Direct-Drive Application

Design and Analysis of a Transverse-flux Permanent Magnet Motor With Hybrid Iron-core

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

Design and Analysis of a 500W 120000rpm High-Speed Permanent Magnet Motor

Design and Analysis of a New Hybrid Excitation Vernier Motor with Reduced Permanent Magnet

Design Considerations, Analysis and Comparison for High-performance Surface Permanent Magnet Vernier Machines

Analysis of Dual PM Vernier Machines with Different Consequent-Pole PM Topologies

Comparative Analysis of Doubly Fed Flux-Reversal Permanent Magnet Machines with Different PM Arrangements and Consequent-Pole Topologies

Rotor Strength Analysis for High Speed Permanent Magnet Machines

Analysis of Dual-Armature Flux Reversal Permanent Magnet Machines with Halbach Array Magnets

Design and Analysis of a Permanent Magnet Frameless Motor

Design and Analysis of Novel Modular Stator Axial-Flux Permanent Magnet Vernier Machine With Improved Power Factor

Torque Analytical Calculation of Formed Winding Permanent Magnet Motor

Design and analysis of a hybrid permanent magnet variable leakage flux motor for low core loss and wide speed range

Analysis of the Magneto-Thermal Bidirectional Coupling Strength of Macro and Micro Integration for Self-Starting Permanent Magnet Hysteresis Synchronous Motors

Investigation of Permanent Magnet Segmentations and Gaps in 2-Pole High-Speed Permanent Magnet Motor with Toroidal winding

Analytical Modeling of A Novel Vernier Pseudo-Direct-Drive Permanent-Magnet Machine